CreatBot DE Plus 3 Extruder 3D Printer – FREE Training – NZ Support

$6,400.00 +gst

Categories: ,

Description

Creatbot DE 3D Printer – Make Extra Large Parts Fast

Like other Creatbot D series 3D Printers, the large DE plus has 3 high temp 400 deg C Extruders.

We provide Free Training, Free Calibration & Free Support from right here in New Zealand.

Creatbot D 3D Printers are targeted to product development studios, manufacturing houses, and serious 3D Printing Professionals. These robust 3d printers are capable of delivering commercial quality results in industrial applications.

All our Creatbot DE 3D Printers sold in NZ feature the new 400 Degree C high temp extruder.
3D Printing Services are Authorised Resellers for Creatbot in New Zealand.

Layby & Terms Available – please Contact Us to arrange!

Why Buy From Us?

3D Printing Services is an Authorised Reseller of everything we sell.

We are technically proficient & know our Products inside out.
We are thus able to give you expert advice in all matters relating to your 3d printer.

You can phone us in the first instance & we will do our best to help you with anything 3D Printing.
We work with our customers to resolve any issues faced as per the consumer guarantees act.

So why should serious 3D Print Users buy a CreatBot over another 3D Printer?

Reliability

Got a power failure? No problem, the creatbot will resume printing when power is restored!
If the filament runs out during print, no problem, the Creatbot will pause & let you load filament!
Every single CreatBot that leaves the factory has been tested for over 100 hours – Thats their level of commitment to Quality Assurance!

If you want Big parts Fast & want the ability to print almost any material out there, this Creabot DE plus with a 400 degree C extruder will deliver like no other.
If you want a 3D Printer that will deliver in literally any environment, the Creatbot DE plus is it.

The DE plus uses Core XY gantry system, which means the heads are kept tightly controlled for greater accuracy & precision.

Enhanced Stability with Everything Metal

Full metal chassis, metal tray mount & metal brackets.
This printer weighs 30Kg for a reason.
This weight allows for amazing stability during prints, which means layers are not affected by vibration or external forces.

Massive Size & Extended Material Compatibility

Print 40cm x 30cm x 30cm parts
Whether you want to print functional industrial grade temperature resistant parts using specialty plastic filaments like ColorFabb HT, or print highly durable parts with Carbon Fibre – this 400 deg rated 3mm bowden extruder will take care of it!

The CreatBot has Powerful Extruders – upto 3 available!

High Speed Geared motors (not plain stepper motors) for exceptional Feed & Retraction reliability
You can print with 3 different materials or colours at the same time.

Technical Specifications:

Large Print Volume of 400mm wide x 300mm deep x 520mm height
3 layer Ceramic Plate Heated Bed on full metal bracket with heat distribution upper
Resolution: 40 – 800 micron spec 0.04mm – 0.8mm layer height.
Automatic resume on power in case of power loss.
Auto shut off after print completion.
Quick access keypad buttons with shortcuts.
SD Card & USB direct printing support.
CreatWare (Cura based) 3D Printing Software thats easy to use for Beginners with a Simple mode, & powerful for Advanced users with a Custom mode.

The DE plus is also available with 2 Extruder heads.

Please note that this Creatbot 3d printer is over 40Kg & needs careful handling.
We welcome you to pickup & avail the Free 2 hour training session at the same time.

Kindly note that due to continuous product improvement, specifications may change without notice.