Wood PLA 3D Printing Filament ColorFabb 3mm SAMPLE

Wood PLA 3D Printing Filament ColorFabb 3mm SAMPLE

$13.00 +gst

Out of stock

ColorFabb WoodFill PLA 2.85mm Sample pack approx 50 grams

This is the best quality of wood filament on the market. Made in Netherlands, it works really well on all 3mm compatible 3d printers like Ultimaker, Lulzbot & Creatbot D series models.

Out of stock

Description

Premium Wood Fill 3D Printer Filament in NZ

We believe our 3D Printer Filament is the best Wood filled material on the market.

It has over 20% of real MDF fibres to give a true wood like texture & effect.
It has a slightly grainy texture as you would expect from wood, contrary to some wood filaments which look quite tacky & plastic like in their feel.

It can sanded just like mdf sheets, & can even be coated with a layer of Polyurethane just like real wood!
This is not just ‘wood colour’ – the material actually has additives in it that can even bond to traditional wood glues.

By adjusting the temperature you can slightly vary the shade of the wood, which can be used to create a faux grain effect with some experimentation.
But kindly note that each & every batch of wood fibres is different colour, so slight varations often occur.

The wood is blended with standard PLA & is thus easier to print out of any 3D Printer without modifications.
You can use similar settings as normal PLA for a start.

It is highly recommended that if you have a thicker diameter nozzles (0.6mm or similar instead of the standard 0.4mm nozzles) please use those.

Start off by 3d printing with wood at 0.25mm (250 micron) layer height with 230 deg extruder at 40mm/s (2400mm/m) speed.

Any questions please contact us