Ultra High Performance 3D Printing Filaments now in New Zealand
-
Sale!
The Best Grade PEEK 3D Printer Filament
This 3D4Makers PEEK filament is made in Netherlands using the absolute best Luvocom 3F 9581 formulation. The material is approved according to EN ISO 10993-1, -5 and -12*, UN-ECE R.118.03 (fire behaviour of materials in buses) and meets the NORSOK M 710 requirements. This is a Higher Flow PEEK created specifically for Additive Manufacturing to offer better Printability than other peek filaments on the market. It is a completely natural beige peek product which will give you a base filament as close to natural peek machining block colour as possible. PEEK is the best material for anything functional & mechanical, that needs to perform as closely to a metal like aluminum as possible while still being a plastic that is 3d printable. So its the perfect choice for Gears, Screws, Cogs, even complex worm wheel assembly parts are fine. That includes Hinges & other loading applications. It is also ideal for electronics enclosures where the enclosure needs to offer electrical & heat insulation, strength, flame retardance & element resistance including wet or organic aqueus conditions. This makes it the ideal filament for medical applications like temporary implants, surgical guides, orthodontic reconstruction, maxillofacial surgery & many other use cases including aeronautical & aerospace. For demanding applications where all else would fail, PEEK is the KING of 3D printer materials. Strongest 3D Printing plastic available in 3d printing filament form. Handle up to 250C continuous operating temperature with Short term temperature performance up to 300 deg C. The most dense semi-crystalline polymer thats 3d printable, yet close enough to aluminium in many applications. Chemically resistant to most corrosive substances & high resistance to aqueous conditions.Used extensively in Aerospace & Automotive applications where you need mechanical strength even at high temperature. BioMedical material that can be used for the human body, dental implants, joint replacements, the list goes on. PEEK also has low resonance properties that are comparable to natural fibres such as wood, which is helpful when it comes to vibration & damping control. This reduces screws & fasteneres loosening under load out of a peek enclosure. Since PEEK is expensive, we are offering small quantity rolls for our kiwi 3D makers who want to try this cutting edge material. This is 0.2 KG of natural PEEK 3D Printing Filament. -
3D4Makers Luvocom 3F PPS Carbon Fiber 3D Printing Filament
Luvocom® 3F PPS CF 9938 BK Filament is a Polyphenylene sulfide, linear with 15% added carbon fibers, and is known for it's heat and chemical resistance. Below 200 °C the material doesn't dissolve in any solvent. This particular high performance polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts. This 3D4Makers PPS CF filament features the following properties:- Outstanding chemical and thermal resistance
- Strong, stiff and lightweight
- Dimensional stability
- Inherently flame retardant
- UN-ECE R.118.03 (fire behaviour of materials in buses)
- UL94 Vertical Burning Test
- EN 45545 (fire behaviour of materials in trains)
- ISO 4589-2 OI (oxygen Index) R22 + R23 - HL1, HL2, HL3
- ISO 5659-2 Ds (smoke density) R22 + R23 - HL1, HL2, HL3
- AFNOR NF CIT (gas toxicity) R22 - HL1, R23 - HL1, HL2, HL3
-
3D4Makers PEI ULTEM™ 9085
PEI Ultem 9085 is FAA approved for Aerospace use. Polyether Imide (PEI) Ultem 9085 is an amorphous, high performance thermoplastics with a glass transition temperature (Tg) of 186 °C. This material features superior mechanical performance, flame retardancy (UL 94-VO rated) and strength-to-weight ratio. We're really proud to stock amazing 3D4Makers Filament that's Made in Netherlands. Our ultra Performance 3D Printing filaments are ready to ship right here in NZ. 1.75mm filament. PEI is an amorphous, high-performance polymer that combines excellent thermal properties, exceptional dimensional stability, inherent flame retardancy, and good chemical resistance. Product attributes include:- High thermal properties; (Tg) of 186°C
- Inherent flame resistance with low smoke evolution and low smoke toxicity
- Long-term hydrolytic stability
- Excellent dimensional stability (low creep sensitivity and low, uniform coefficient of thermal expansion) and highly reproducible part-to-part dimensions
- Exceptional strength and modulus, even at elevated temperatures
- Good resistance to a broad range of chemicals, such as automotive fluids, fully halogenated hydrocarbons, alcohols, and aqueous solutions
- Stable dielectric constant and dissipation factor over a wide range of temperatures and frequencies
-
3D4Makers PEI ULTEM™ 1010
Polyether Imide (PEI) Ultem 1010 is an amorphous thermoplastic with a glass transition temperature (Tg) of 217 °C. It has a continuous operating temperature of up to 170 °C. This inherently flame retardant plastic has UL94 V0 and 5VA ratings. It is dark amber & slightly translucent. We source our ultra performance filaments very carefully, as they are expensive, & we want you to have the best experience with them. We selected 3D4Makers ultra Filament that's Made in Netherlands to tight tolerances & offers easier printability than other ultra performance filaments on the market. Good printability leads to excellent layer adhesion & this greatly improves the impact resistance, strength & durability of this PEI 1010 filament over that of others. Their products are consistent batch to batch, unlike some others we have tested. Our ultra Performance 3D Printing filaments are ready to ship right here in NZ. PEI Ultem attributes include:- Inherent flame resistance with low smoke evolution and low smoke toxicity
- Long-term hydrolytic stability
- Excellent dimensional stability (low creep sensitivity and low, uniform coefficient of thermal expansion) and highly reproducible part-to-part dimensions
- Exceptional strength and modulus, even at elevated temperatures
- Good resistance to a broad range of chemicals, such as automotive fluids, fully halogenated hydrocarbons, alcohols, and aqueous solutions
- Stable dielectric constant and dissipation factor over a wide range of temperatures and frequencies
-
3D4Makers PEEK Carbon Fiber Now in NZ!
3D4Makers presents Luvocom® 3F PEEK CF 9676 Matte Black Filament is a 15% carbon reinforced PEEK (Polyether Ether Ketone) with extraordinary characteristics in terms of mechanical, thermal and chemical resistance. PEEK with carbon is used in demanding industries like oil and gas, automotive, mechanical engineering, aircraft and aerospace technologies. This particular high performance polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts. 3D4Makers PEEK CF filament features the following properties:- Excellent mechanical, thermal and chemical performance
- Suitable for demanding industrial applications
- Inherent flame retardant
- High dimensional stability
-
Polyether Ketone Ketone (PEKK) is a semi-crystaline thermoplastic in the Polyaryletherketone family. It has higher heat resistance than PEEK, offers exceptional chemical resistance, & can withstand high mechanical stress. It is inherently flame retardant and has unique tribological properties unlike any other ultra performance polymer currently available for 3d printers. PEKK has a higher Tg than PEEK. PEKK is also easier to print compared to PEEK. PEKK has now overtaken PEEK as the best FDM 3d printing material. LUVOCOM® 3F PEKK 50082 Material Properties
- Density 1.27 g/cm³
- Tensile Strength 90 MPa
- Elongation at maximum force 5%
- Modulus of elasticity 3 GPa
- Flexural strength 150 MPa
- Flexural elongation at max. force 6%
- Flexural modulus 2,5 GPa
-
Luvocom® 3F PEKK 50082 3D Filament
PEKK Filament is easier to print than regular PEEK filament with better layer adhesion while offering similar strength and resistance properties, & better dimensional stability than PEEK. PEKK also has a higher Tg Glass Transition Temperature than PEEK. This unique modified neat PEKK is a low warp formluation that provides dimensional stability in delivering semi-crystalline parts with no warp. Polyether Ketone Ketone (PEKK) is a semi-crystaline thermoplastic in the Polyaryletherketone family. With high heat resistance, chemical resistance , has the ability to withstand high mechanical loads, is inherent flame retardant and has unique tribological properties. PEKK Filament has a tuneable crystallization rate which allows FFF or FDM users to take advantage of both the extreme performance of PAEKs and easier processing of amorphous materials. Made in Netherlands by 3d4makers using Lehvoss genuine luvocom resin. We always recommend an active heated chamber for 3d printing all advnaced materials including PEKK. But this particular grade gives you a good chance of printing simpler smaller parts without a heated chamber. 200g roll in a natural brown beige colour. Want to 3d print this material routinely? Consider our Creatbot PEEK-300 industrial material 3d printer.
