Creatbot have a reputation for making large industrial grade devices that are robust & reliable enough even for commercial usage.
All Creatbots share several common features specifically catered to industrial & commercial uses

Please Click here for Creatbot 3D Printers Comparison to see which Creatbot 3D Printer is right for you.

  • Carbon Fibre reinforced Steel board Actual board size is 490mm x 305mm Designed to fit our Creatbot F430 PEEK 3d printer but can be used in any machine of similar size. The advantage is that this surface offers very high abrassion resistance. So when you 3d print with high temp materials, the surface can last longer. The other advantage of these boards is that they can be used as removable build plates. We recommend sticking a PEI sheet on this if you want to use them in that way, as PEI is a more versatile surface & not just one for 3d printing PEEK. Please see our 400x300mm PEI sheets here.
  • Tempered Glass Bed for Creatbot DX series 3D Printers

    Designed for a build area of 300x250mm. Plate measures approx 320 x 270mm (rounded corners) Can be used with any 3d printer bed in those dimensions if you would like to use it as a removable clip down bed setup. Comes with holes designed to mount on genuine Creatbot DX & DX Plus 3D Printers. This is only the glass bed & does not include the ceramic heater plate at the bottom. You do not need a new heater if the heater is working fine - just peel the old one off & stick it back onto the new plate. Compatible with models DX01, DX02, DX03, DX-plus 01, DX plus 02, DXplus 03. Will work on new & old version machines.
  • Buildtak style Bed Mat designed for the Creatbot F160 & F160 PEEK 3d printer. You can also buy our matching Carbon Fibre Metal Plate to setup a removable bed system.
  • This is a Carbon Fibre reinforced spring steel sheet designed for the Creatbot F160 & F160 PEEK 3d printer Bed. It allows you to setup an easy removable build plate system by 3d printing on this plate, or attaching your chosen build surface onto this plate. Check out our matching Creatbot F160 Build Tak Bed Mat for a sleek & easy solution. This is a high wear resistant 3d printing surface that can provide good adhesion for PEEK & PEI or other advanced polymers. Ideal for those who 3d print with such materials extensively. You can't print directly on Carbon Fibre with cheaper materials like PLA, unless you use Glue, which is unnecessary. You can also buy our 200x200mm PEI sheet which are perfect to stick on this metal plate.  
  • Do you want to 3D Print with FAA Approved Aerospace materials & FDA Approved Orthodontic materials ? 3D Printing Advanced materials like PEEK, PEI Ultem 1010 & 9085 once meant spending hundreds of thousands... Presenting New Zealand with the very first open format non-proprietary PEEK 3D Printing Solution! Our Creatbot F-430 3d printer will come free training, PEEK capable hot ends & bed plate in the package. This machine can print with any material currently available in filament form from the entire PEEK family including PEAK. An Advanced 3D Printer that has every feature a 3D Printer can be expected to have for superb performance. Get the F430 & you will never look back. Please see the complete Technical Specifications in the description below:
  • 3D Printer Fans

    $15.00 +gst
    This listing is for any 1 of the many fans we sell for Creatbot & Wanhao 3D Printers. Kindly specify which fan you are after from the list below & we will send it. Creatbot D series 3d printer Fans: Extruder cooling fan Part cooling fan Board cooling fan Creatbot F series fans: Extruder cooling fan Part cooling fan Wanhao Fans: i3 plus & D4 extruder cooling fan 24V i3 plus & D4 part cooling fan 24V i3 original or V2 extruder cooling fan 12V i3 original or V2 part cooling fan 12V D4 part cooling fan D4 internal board cooling fan D7 original version cooling fan D7 versions 1.3+ cooling fan As authorised NZ sellers of all 3d printers, we stock a vast range of genuine parts for the 3d printers we sell. In order to keep things as simple as possible, we keep the price uniform across the products. In some cases, we use generic parts where authorised parts are either not available, or have been advised to do so. Some of these authorised spare parts but may be used in other generic brands of machines as well, but please research this. Please choose carefully as we do not offer exchanges on parts unless otherwise discussed.
  • For Creatbot DM , DX / DX Plus & DE / DE Plus 3D Printers This circuit board detects if there is a power failure while your Creatbot 3d printer is printing. Then when power resumes & the printer is started, the option to resume to resume the existing print is offered. This circuit is not critical, & the printer can still continue to be used with the board's white wire unplugged. Locations where there are excessive power outages seem to cause this board to blow out more frequently than other places. This is mainly because of spikes & voltage fluctuations in such locations. If you experience the need to frequently replace these, we recommend connecting your printer through a spike protector.
  • d600 3d printer fully enclosed chamber Creatbot D600 3D Printer in NZ
    Big Parts - High Accuracy - Industrial Quality The Creatbot D600 is a top of the line Commercial grade FDM 3D printer. Large 600mm x 600mm x 600mm enclosed build volume makes it possible to print large parts one piece with ease. Free training is offered with our Creatbot D600. We also discuss your product specific requirements & help you get the best possible outcomes from these machines. We also offer free implementation assistance, so you can rely on a team right here in Auckland. Suited to producing large yet highly accurate 3d models, the D600 has every professional grade feature you would expect. Please see full specification details below. Contact us today to see how our leading edge Creatbot D600 could give your business & an edge in product development.
  • d600 3d printer fully enclosed chamber Creatbot D600 PRO 3D Printer NZ
    Big Parts - High Accuracy - Industrial Quality The Creatbot D600 Pro is our new top of the line Commercial grade FDM 3D printer. It has a few improvement over the already established D600 line. Large 600mm x 600mm x 600mm enclosed build volume makes it possible to print large parts one piece with ease. Free training is offered with our Creatbot D600. We also discuss your product specific requirements & help you get the best possible outcomes from these machines. We also offer free implementation assistance, so you can rely on a team right here in Auckland. Suited to producing large yet highly accurate 3d models, the D600 has every professional grade feature you would expect. Please see full specification details below. Contact us today to see how our leading edge Creatbot D600 could give your business & an edge in product development.
  • With 2 high temp Extruders, Free Training, & Free Calibration, Creatbot DX 3D Printers are targeted to product development studios, manufacturing houses, and serious 3D Printing Professionals. These robust 3d printers are capable of delivering commercial quality results in industrial applications. You can choose 1.75mm heads or 3mm heads, or even 1 of each! Print 30cm x 30cm x 25cm parts 2 Heads (up to 3 available, please see DX03 model) Enhanced Stability with Everything Metal 40 - 800 micron layer height XY Precision of 0.05mm A highly reliable 3d printer that is at home in everything from a home office through to a factory floor - now at an unbeatable price.