Monocure Resinaway ezy wipes

Monocure Resinaway ezy wipes

$30.00 +gst

In stock

RESINAWAY® is a powerful cleaning agent designed specifically for removing uncured resin from printed objects. With its concentrated formula, it is recommended to use the product as is without diluting it with water. For optimal results, it is suggested to use RESINAWAY® in conjunction with an ultrasonic cleaning bath, although it can also be used with a soft brush if an ultrasonic bath is not available.

To use RESINAWAY®, simply submerge the printed object in the cleaning agent until all traces of uncured resin are completely removed. Once clear of resin, the object should be removed from the solution, and any remaining liquid can be removed by either using compressed air or patting it dry with a lint-free cloth. To ensure the best finish, the part should then be post-cured using a recommended LED 405nm light until the surface becomes tack-free, which typically takes around 5 minutes at 30 watts. Finally, the part should be rinsed under running tap water.

In addition to cleaning printed objects, RESINAWAY® can also be used to clean vats, build plates, instruments, and surfaces. For these applications, it is suitable to rinse, soak, or wipe with RESINAWAY®, followed by washing with fresh water.

Overall, RESINAWAY® offers a convenient and effective solution for safely and efficiently removing uncured resin from printed objects and related equipment, ensuring professional and high-quality results.

In stock

Description

Use this cleaning agent as is, do not dilute with water. For best results use in conjunction with an ultrasonic cleaning bath (heat is unnecessary).

Keep printed objects submerged in RESINAWAY® until the uncured resin has been removed. If you are using without an ultrasonic cleaning bath, use a soft brush will assist in this process.

Once clear of resin, remove the object from RESINAWAY®, and for best results, use compressed air to remove the remaining liquid, otherwise pat dry with a lint-free cloth. Then post-cure the part using a recommended LED 405nm light until the surface is tack free (approx. 5mins at 30watts). The final process is to rinse under running tap water. For cleaning vats, build plates, instruments & surfaces, rinse/soak/wipe with RESINAWAY® then wash with fresh water.