Wood 3D Printer Filament in NZ
Our Wood Filament has over 20% of real MDF fibres to give a true wood like texture & effect.
It has a slightly grainy texture as you would expect from wood, contrary to some wood filaments which look quite tacky & plastic like in their feel.
It can be sanded just like mdf sheets, & can even be coated with a layer of Polyurethane just like real wood!
This is not just ‘wood colour’ – the material actually has milled wood in it that can even bond to traditional wood glues.
You can use similar settings as normal PLA for a start.
It is highly recommended that you use a thicker diameter nozzle (0.6mm or similar instead of the standard 0.4mm nozzles), but 0.4mm can also work.
Start off by 3d printing with wood at 0.25mm (250 micron) layer height with 230 deg extruder at 40mm/s speed.
Please note that since this is made using real wood fibers, there can be some batch to batch colour variation.
So the filament shade can look slightly different to what you see on the screen.
