3D4Makers Luvocom 3F PEEK Carbon Fiber 9676 Black 3D Filament

Home » 3D Printer Shop » 3D Printing Filament » Ultra Performance 3D Filaments » PEEK » 3D4Makers Luvocom 3F PEEK Carbon Fiber 9676 Black 3D Filament
Carbon Fiber Reinforced PEEK 3D Print

3D4Makers Luvocom 3F PEEK Carbon Fiber 9676 Black 3D Filament

$349.00 +gst

In stock

3D4Makers Carbon Fibre PEEK Now in NZ!

Luvocom 3F PEEK CF 9676 Matte Black Filament is 15% carbon reinforced PEEK (Polyether Ether Ketone) with extraordinary characteristics in terms of mechanical, thermal and chemical resistance. PEEK with carbon is used in demanding industries like oil and gas, automotive, mechanical engineering, aircraft and aerospace technologies.

This particular high performance polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts. 3D4Makers PEEK CF filament features the following properties:

  • Excellent mechanical, thermal and chemical performance
  • Suitable for demanding industrial applications
  • Inherent flame retardant
  • High dimensional stability

This is a true advanced material which is perfectly suited to automotive, transportation, electrical & electronic applications.

0.2 kg reel of 1.75mm filament in matte black carbon colour.

We’re really proud to stock Netherlands Finest Filament in New Zealand.
These ultra Performance 3D Printing filaments are ready to ship.

In stock

SKU: 21743 Categories: , , ,

Description

Material properties

Description Value Test method
Density 1,36 g/cm3 ISO 1183
Tensile  strength (at 23°C/50% rh) 126 MPa ISO 527
Elongation (at 23°C/50% rh)
3,9 %
 ISO 527
Modulus of Elasticity   (at 23°C/50% rh) 7,8 GPa ISO 527
Charpy Impact Strength 66 kJ/m² eU
Charpy Impact Strength notched 7  kJ/m²
Heat Distortion Temp (HDT A) 280   °C ISO 75
Continuous Service Temp. 250   °C UL 746B
Maximum (short term) Use Temp. 280  °C /
Insulation Resistance (Strip electrode R25) <10⁹ Ω DIN/IEC 60167
Surface Resistance <10⁹ Ω DIN IEC 60093

Printing setup recommendations 

Description Value
Printer nozzle temperature 400 – 450°C
Heated bed temperature 110°C +
Print Speed 15 – 30 mm/s
Bed Adhesion Magigoo HT on glass or a PEI Sheet
Pre drying recommendations 120°C, 4 – 8 hours

To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. When the 3D printer is not being used it is important to keep filament in a bag and stored in a cool, dry and dark place until it is used again.

Additional information

Weight 0.2 kg
Dimensions 200 × 150 × 50 mm

Related products