3D4makers Natural white C8 Filament 1.75mm (750 g)

3D4makers Natural white C8 Filament 1.75mm (750 g)

$64.00 +gst

In stock

3D4Makers C8 3D Printing Filament 1.75mm 750g

Facilan™ C8 is a type of filament specifically designed for 3D printing. It is known for its excellent printability and high strength properties compared to traditional PLA (Polylactic Acid) filament.

One notable advantage of Facilan™ C8 is its ability to print without visible layers. This means that the printed object will have a smooth and seamless appearance, devoid of any visible lines or layers that are typically seen with other filament types. This makes Facilan™ C8 ideal for printing objects that require a high level of aesthetic finish.

In addition to its superior surface finish, Facilan™ C8 also possesses enhanced strength properties compared to PLA. The filament has good dimensional stability, which means that the printed objects are less prone to warping or shrinking during the printing process. This allows for greater structural integrity and accuracy in the printed parts.

In stock


Facilan™ C8 Material Properties

  • Density 1.4 g/cm³
  • Tensile Strength 45 MPa
  • Elongation at yield 4%
  • Tensile Modulus 3000 MPa 
  • Flexural Strength  67 MPa
  • Flexural Modulus 3640 MPa
  • Izod impact strength (notched) 7 kJ/m2
  • Shore D Hardness  72
  • Heat Deflection Temperature 55°C

Print Settings 

  • Bed Temperature: 35-50°C
  • Adhesion: On glass or a PEI Sheet
  • Print Temperature: 195 °C (180-210°C).
  • Print Speed: 40 mm/s