Affordable Premium Wood Fill 3D Printer Filament in NZ
We believe our 3D Printer Filament is the best value Wood filled material on the market.
It has over 20% of real MDF fibres to give a true wood like texture & effect.
It has a slightly grainy texture as you would expect from wood, contrary to some wood filaments which look quite tacky & plastic like in their feel.
It can sanded just like mdf sheets, & can even be coated with a layer of Polyurethane just like real wood!
This is not just ‘wood colour’ – the material actually has additives in it that can even bond to traditional wood glues.
By adjusting the temperature you can slightly vary the shade of the wood, which can be used to create a faux grain effect with some experimentation.
The wood is blended with standard PLA & is thus easier to print out of any 3D Printer without modifications.
You can use similar settings as normal PLA for a start.
It is advisable to print slightly slower & thicker with the material as the fibres are an additive & can cause the nozzle to choke for long prints on finer settings.
Start off by 3d printing with wood at 0.25mm (250 micron) layer height with 230 deg extruder at 60mm/s (3600mm/m) speed.
Any questions please contact us