PPS CF 9938 Carbon Fiber Filament 1.75mm Black 750g – First in NZ!

PPS CF 9938 Carbon Fiber Filament 1.75mm Black 750g – First in NZ!

$199.00 +gst

In stock

3D4Makers Luvocom 3F PPS Carbon Fiber 3D Printing Filament

Luvocom® 3F PPS CF 9938 BK Filament is a Polyphenylene sulfide, linear with 15% added carbon fibers, and is known for it’s heat and chemical resistance. Below 200 °C the material doesn’t dissolve in any solvent. This particular high performance polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts.

This 3D4Makers PPS CF filament features the following properties:

  • Outstanding chemical and thermal resistance
  • Strong, stiff and lightweight
  • Dimensional stability
  • Inherently flame retardant
    • UN-ECE R.118.03 (fire behaviour of materials in buses)
    • UL94 Vertical Burning Test
    • EN 45545 (fire behaviour of materials in trains)
      • ISO 4589-2 OI (oxygen Index)    R22 + R23 – HL1, HL2, HL3
      • ISO 5659-2 Ds (smoke density) R22 + R23 – HL1, HL2, HL3
      • AFNOR NF CIT (gas toxicity)       R22 – HL1, R23 – HL1, HL2, HL3

Matte Black Colour 1.75mm filament diameter 750 grams roll – 0.75kg

In stock


Material properties

Description Value Test method
Density 1,51 g/cm3 ISO 1183-3
Tensile  Strength (dry, @50 mm/min) 120 MPa ISO 527
Flexural strength (dry, @10 mm/min)
170 MPa
ISO 178
Charpy impact strength (dry) 22 Kj/m² ISO 179 1eU
Continuous service temperature (20.000 h) 220 °C IEC 60216
Service temperature (during lifetime max. 200h) 240 °C /
Insulation resistance strip electrode (R25) ≤10⁶ Ω DIN IEC 60167
Surface resistance (ROB) <10⁶ Ω DIN IEC 60093

Printer recommendations

Description Value
Printer nozzle temperature 310 – 340°C
Heated bed temperature 100°C
Print Speed 20 – 50 mm/s
Bed Adhesion Glue on PEI sheet / carbon steel plates / glass (extra care if on direct glass)
Pre drying recommendations 80°C, 4 – 6 hours
Notes Please use a hardened nozzle (0.6mm recommended) for carbon filled filaments

Additional information

Weight 1 kg
Dimensions 200 × 150 × 50 mm