-
These relays are used in many 3d printers including the Creatbot F430, D600 & PEEK300. Usually they are used for the Bed heater or the Chamber heater. Please select which relay you want from the list. The triger voltage is 3-32V DC. Please pick the correct type. Be sure before you install it. Relays blow instantly if you get the trigger voltage wrong, or connect the wrong end into the wrong point.
-
Phrozen screen protector is made of durable and high-transparency material to protect your LCD screen from the risk of resin spilling & damaging your LCD screen. This works beautifully without affecting your prints. Just relevel your bed after you stick it on the lcd screen of your resin 3d printer & you are good to go.
-
Genuine 10" 8K Mono LCD Screen for Phrozen Mighty 8K Resin 3d printer. This is a high quality durable screen designed to give you the best long lasting performance you can expect. If your LCD screen gets damaged, or you see the exposure affected, it might be time to change your LCD. This is the masking LCD screen which projects the UV light layers for your 3d print. It is not the small touch screen panel used to control the printer.
-
Pulley for the belt rail system on Wanhao i3 & similar 3d printers. Will work on i3 plus as well new i3 plus mark 2. Is also compatible with many other 3d printers, but please check to be sure.
-
This is an inductive sensor for 3d printers like Wanhao i3 plus mk2, D6, & D9. It will suit most other 3d printers that use magnetic proximity sensors for bed levelling. Or for any other applications where a magnetic sensor is used for proximity, detection, limit switching etc.
-
This is the full hot end which gives you new extrusion components under the motor. It includes the heat brake, throat tube, hot block, & a 0.4mm nozzle. It comes fitted with a new cartridge heater & a thermocouple temp sensor as well.
-
These are the drivers used to drive the stepper motors on Creatbot 3d printers. They are used for the X Y Z axi motors as well as for the Extruder motors. Different drivers have been used for the X Y axi as well as for the Z & E1 / E2. Please choose the correct model number. If the model you have is not listed, please contact us & we will set it up for you.
-
The Phrozen Air Purifier is specially designed to reduce the odour from printing Resins & Filaments in 3d printers that do not have activated air filters. The compact and sleek design of the purifier makes it easy to integrate into any workspace without occupying too much space. They can sit snugly within most machines, & can reduce the VOCs exiting the units. Resins & Filaments used in the 3D printing process, sometimes emit strong smells, which can be a nuisance to both the printing environment and the overall printing experience. The purifier is designed to be user-friendly and low-maintenance. It has a convenient control panel that allows users to monitor the filter life and replace them when needed. By using the Phrozen Air Purifier, 3D printer users can significantly reduce the resin odor, creating a more pleasant and healthier environment for both themselves and others present in the area. This improved air quality not only enhances the overall printing experience but also ensures a safer and more enjoyable workspace. This little device helps alleviate one of the common issues faced by 3D printing enthusiasts.
-
Magigoo PA adhesive is specifically designed for 3D printing with polyamide (nylon) filaments. It offers a strong adhesion to the bed for polyamide based filaments. It can be used with all kinds of bed surfaces, however we recommend PEI or Garolite for Nylon. It can also be used with Carbon Fiber reinforced Nylon & Glass Filled Nylons. When printing with higher temp filaments including Nylon 6 Carbon based filaments, if the Magigoo PA doesnt perform very well in your application, we also have Magigoo HT, which may work better in some cases. Magigoo glue reduces warping in FDM 3D printers. Warping is caused by the differential cooling of a print during a 3D printing process made up of layers. For printing Nylon reliably, apply a thin layer of Magigoo PA on your print bed before printing in nylon filaments. This will ensure a successful print. If too much glue has been lacquered on, please wipe with a damp sponge & then reapply glue.
-
Suitable for FlashForge 3D Printers including Adventurer , Finder, Inventor, Guider & similar 3d printers.
-
Hinges used for many Creatbot 3D Printers. Fits newer version of Creatbot DX, DE & also some versions of F160. Used with the clear plastic panels used on doors. 1 piece. Please buy as many as you need. Standard 40mm hinge that can work for many other applications.
Alex L2023-11-28I have dealt with the 3D Printer Store for several months now and have to say that the experience has been very positive. Zubbin is extremely knowledgeable in this field, enthusiastic, honest and responsive. Pre and Post Purchase customer support has been great. He will have your best interest in mind and will recommend the best product for your needs. My positive experience dealing with him professionally has led me to buy product from him for personal use. We are very lucky to have such a supplier providing these kinds of specialized 3D Printers, Filaments, accessories and services in New Zealand. The rare filaments can sometimes be difficult to source but he will do his best to find alternatives to get what's needed ASAP or even suggest proper alternatives. I am looking forward to future collaboration with this supplier.
Elias Bayless2023-10-18First choice for all my 3d printing needs, the team here really does a great job! Always get my filament here and it arrives really fast and always performs very well in my printer.
Lyle Adams2023-10-18I recently purchased a 3D printer from this business and also took their training. Zubbin's knowledge and assistance is top-notch. He provided valuable insights not only on 3D printing but also related topics. Highly recommended!!
Dylan Cooper2023-09-19Solid company to deal with. I have ordered filament multiple times from this company. I have also been advised on better filament options than what I ordered, which worked out really well. Will continue to shop here!
Maarten van den Heuvel2023-08-21Good prices, fast shipping, excellent communication and when there was a hiccup with my order it was sorted super fast and to my full satisfaction. Can recommend.
Phil Shimmin2023-08-16Great service from these guys. On my most recent order there was a stellar turnaround of only 24 hours between initial stock query and the filament being in my printer.
Dan King2022-09-29Shipping and packaging was excellent and best in market pricing. I had an issue with a misunderstanding about the particular properties of the resin I purchased but Zubbin responded quickly and helped me resolve the issue. Perfect customer service, they have gained a loyal customer.
Mike O2022-09-12These guys are awesome. I used to buy my filament from overseas for my projects and needed something in a hurry and went looking for something local. I'm so glad I did. Not only are the prices as good or better than what I was getting overseas and even more of a deal when considering the pricing I was paying for shipping their turn around each time has been next day. Great range of in stock filaments, good prices, super fast turn around and excellent customer service.
Dion Hitchens2022-08-09Kia ora, This is a fantastic business selling reliable machines at a great price point. What I am impressed with the most is that the owner is always willing to help if I have a problem his insight and knowledge he is so willing to share is always on point and allows me to solve the problem I am trying to resolve. I look forward to doing more business with them. thanks
Michael Williams2022-06-28Sent them an email explaining what I was trying to achieve and asked for their advice. They responded promptly and recommend a basic 3d printer which turned out absolutely fit for purpose. Ordered online and with good communication i had printer within days. Will definitely return when I upgrade. This printing stuff is very addictive.