- Molded tank allows for cheap replacements and extras for switching out resin on the fly
- Fibreglass reinforced plastic sports increased durability and resistance to corrosion and resin.
- It is equipped with a rubber seal to ensure that the vat is water-tight to help avoid resin leaks.
- E10 Vat Max Volume 1500mL without build platform and 700mL with build platform
-
Genuine E10 resin tray molded using non corrosive plastic. This vat fits all EPAX E10 series 3D printers. Works with the original 8.9" screen E10 as well the new 10.1" E10 5K 3d printers. Each vat comes with a sheet of nFEP film already installed, ready to use. Just remove the old tray out & slide the new one in. Thats it, easy installation.
-
Extruder Circuit Board for FlashForge Adventurer 3 3D Printers
-
This is the small PCB that goes behind the extruders of a Creatbot F430 head. The main ribbon cable connects to it from the motherboard underneath the machine. And other connectors such as the temp sensors, cartridge heaters, probe etc plug into this little board.
-
Small Size FEP Film for common SLA Resin 3D Printers This FEP Film is suitable for Phrozen Sonic Mini, Wanhao D7, Anycubic Photon, Creality LDR, Elegoo Mars etc DLP LCD 3D Printers that all use around the same Vat size. This will work with Metal or Plasticvats. Very easy to use. Simply open the screws on your vat, remove the old FEP sheet, & put this sheet in place. Please see the video below to see how easily you can change the FEP on your Phrozen Sonic Mini Resin 3D Printers. You should change your FEP film when its cloudy, has excessive scratches, or you find the prints stick to it too easily rather than the bed. Depending on several factors, this is usually around 200 hrs of use. FEP is like a car tyre, you can have the best mechanics but without a good tyre, you're asking for trouble. We keep our prices on consumables cheap to help kiwis get the best results with 3d printers without prolonging the need to replace important components. Also check out the PlateBond Adhesion Promotor to help your base layers stick better to the bed of your resin 3d printer.
-
This is the flexible metal plate that fits on the new magnetic beds of FlashForge Creator 3 3D Printers. It has a Polycarbonate re-inforced build surface that provides excellent adhesion to most common materials. However, for Nylon based materials, we still recommend you put a thin layer of the glue stick on it.
-
This is the full hot end which gives you new extrusion components under the motor. It includes the heat brake, throat tube, hot block, & a 0.4mm nozzle. It comes fitted with a new cartridge heater & a thermocouple temp sensor as well.
-
This is the mat that sticks onto the spring steel build plate, which adheres on the magnetic 3D Printer bed of 3d printers like FlashForge Creator 3, 3 Pro & 3 Pro v2 . It can also be used on any 3d printer that has a 300x250mm build volume & you want a good quality surface mat. This item is only the top build tak style mat, that you can 3d print on. The photo is to show you how the mat is to be used in relation to a Creator series 3d printer. This is a sticker, it has glue on 1 side, just peel it & stick it onto any surface. It is a Polycarbonate re-inforced build surface that provides excellent adhesion to most common materials. However, for Nylon based materials, it will be best to put a thin layer of the glue stick on it. Some Flashforge mats are blue, & some are black - they are exactly the same mat, flashforge just changed colours between the machine releases.
-
Full Swappable Extruder Head for the new FlashForge Creator 4 3D Printer. 3 Extruder options available: HS Extruder = High Temp 360C Extruder including Carbon Fiber filled materials. HT Extruder = upto 320C temp for common plastics including PLA/ABS. F Extruder = Specialist flexible filament extruder for high flex TPU TPE & similar materials. Please specify which head you want on the order notes.
-
This is the latest flexible build plate that fits on the new magnetic beds of FlashForge Creator 4 3D Printers. It now has a PEI reinforced build surface that provides excellent adhesion to most common materials including flexible TPU materials. It also gives a very good bottom surface finish. It is superior to the older Black plates that FlashForge used to supply. We highly recommend PEI sheets as the best surface to print on. For Nylon based materials, we still recommend you put a thin layer of the glue stick on it.
-
This is a temperature sensor for the newer FlashForge Creator Pro 2 & Creator 3 Pro 3d printers. It is a threaded type that fits into the hot end block. This is not for older flashforge Creator series printers.
-
This is a Genuine FlashForge brand nozzle for FlashForge Creator Pro 2 IDEX 3D Printers. It is common for nozzles to wear or block after a period of use, & need replacing. Simply unscrew the existing nozzle & screw the new one on, easy. Please remember to always heat your hot end before removing your nozzle.
-
Suitable for FlashForge 3D Printers including Adventurer , Finder, Inventor, Guider & similar 3d printers.
