Luvocom 3F PAHTCF 9891 High Strength Carbon Fibre Nylon – Made in Netherlands

Luvocom 3F PAHTCF 9891 High Strength Carbon Fibre Nylon – Made in Netherlands

$160.00 +gst

In stock (can be backordered)

Luvocom PAHT CF Filament by 3D4Makers in Netherlands

This is our flagship High Strength & High Temp Nylon 6 with Carbon Fibre, which can handle a whopping 120C continuous service temperature while offering a 130 MPa strength.
Despite being a Nylon 6, it has a low moisture absorption formula so it won’t get soft quickly like cheaper Nylon’s do.

Nylon 12 offers better moisture reduction properties, but Nylon 6 is stronger & handles more heat.
So This Nylon 6 aims to give you the best of both worlds.

1.75mm 750g roll.

In stock (can be backordered)

Description

Material properties

Description Value Test method
Density 1,24 g/cm³ ISO 1183-3
Tensile  strength (at 23°C/50% rh) 130 MPa ISO 527
Elongation at maximum force
2 %
ISO 527
Modulus of Elasticity  (at 23°C/50% rh) 11,5 GPa ISO 527
Charpy impact strength 35 kJ/m² ISO 179 1eU
Heat Distortion Temp. 90 °C ISO 75
Continuous service temperature (20.000 h) 120 °C EC 60216
Service temperature (during lifetime max. 200h) 160  °C /
Insulation resistance strip electrode (R25) ≤10² Ω DIN IEC 60167
Surface resistance (ROB) <10² Ω DIN IEC 60093

Recommend printing with a 0.6mm hardened nozzle, starting at 290C extrusion temp.

Please remember to dry all Nylons at least 6hrs at 60C before printing.

Additional information

Weight 1 kg