3D Printer Shop

Home » 3D Printer Shop
  • 3D Printing Resin Colouring Pigment Set New Zealand

    Monocure Resin Colouring Pigment Dye Set CMYK – Create your resin colour

    $29.00 +gst

    MonoCure CMYK PIGMENT SET

    Monocure 3D CMYK Pigment Set Is Intended For Use With 3D Resins to create your own custom colours to suit your individual needs! Just add droplets of colours into your resin to make your own unique resin colours. Use White Resin for more Opague colours, or Clear Resin to make more translucent colours - the choice is yours.

    These pigment dispersions are designed to work with 3D Printing applications where UV light is used to cure the resin layer by layer.

    We use a simple but highly effective approach to anchoring dispersant onto pigments to significantly increase print performance.

    Our pigment dispersions do not affect performance across our resin systems. Increased stability is achieved by cross-linking the dispersants to create a robust polymer shell, entrapping each pigment particle.

    Set contains 4x 30ml bottles - cyan, magenta, yellow, and black pigments - 1 of each colour to create your own wonderfully unique resin colours.

  • Creatbot DX DE series 3D Printer nozzle

    Creatbot D series 3D Printer Nozzle

    $30.00 +gst
    Genuine Creatbot second generation nozzles. Will suit all Creatbot D series 3D Printers we sell: DM, DX, DE & Plus versions We stock a wide range of nozzle diameters: 0.4, 0.6, 0.8, 1.0 mm  
  • Creatbot D series 3d printer Throat Tube Heat Brake part new zealand

    Creatbot D series 3D Printer Throat Tube Heat Brake

    $30.00 +gst
    Genuine Creatbot Throat Tube which connects onto the heat sink on top & the nozzle goes at the bottom. If you have replaced nozzles & still find there are extrusion issues, please consider changing this part. Will suit all Creatbot D series 3D Printers we sell including DM, DX, DE, the Plus versions, & the older D600 3mm machines  
  • Creatbot teflon hot end heat break tube

    Creatbot F series 1.75mm Teflon lined Heat Brake Tube

    $30.00 +gst
    Genuine Creatbot Throat Tube which connects the hot block into the extruder mechanism. This is the teflon tube lined version which makes it easy to print PLA, PETg etc thanks to the teflon liner. But it will only operate up to 260C, please do not print hotter than that else you will damage the teflon liner. The heat sink & the nozzle is attached at the bottom of this piece. If you have replaced nozzles & still find there are extrusion issues, please consider changing this part. This tube is considered part of the heat break mechanisk, & has a partial teflon coating on the top to aim smooth extrusion. So it is recommend you change this tube as needed for the best uniformity in extrusion as well as reduction of jams or blockages particular in longer 3d prints. Will suit all Creatbot D series 3D Printers we sell including F160, F160 PEEK, F430, F430 PEEK, D600 PRO (not the older D600)
  • Creatbot Hgh Temp Full metal hot end heat break nz

    Creatbot F series 1.75mm Full Metal Hotend Heat Brake Tube

    $30.00 +gst
    Genuine Creatbot Throat Tube which connects the hot block into the extruder mechanism. This is the Full Matal hot end which doesn't have a teflon liner inside, allowing you to easily print Carbon Fiber as well as high temp materials up to 450C. If you are new to 3d printing, you might find it useful to start with the other Teflon lined heat brake version as it can be easier to print common materials like PLA & ABS with that one. The heat sink & the nozzle is attached at the bottom of this piece. If you have replaced nozzles & still find there are extrusion issues, please consider changing this part. This tube is considered part of the heat break mechanisk, & has a partial teflon coating on the top to aim smooth extrusion. So it is recommend you change this tube as needed for the best uniformity in extrusion as well as reduction of jams or blockages particular in longer 3d prints. Will suit all Creatbot D series 3D Printers we sell including F160, F160 PEEK, F430, F430 PEEK, D600 PRO (not the older D600)
  • FlashForge Creator 3d printer hot end thermocouple

    FlashForge Creator Hot End Thermocouple Temp sensor

    $30.00 +gst
    This is a temperature sensor for the newer FlashForge Creator Pro 2 & Creator 3 Pro 3d printers. It is a threaded type that fits into the hot end block. This is not for older flashforge Creator series printers.
  • Temp sensor for Creatbot D & F series 3d printers

    Creatbot D series 3D Printer Thermocouple Temperature Sensor

    $35.00 +gst
    This is a temperature sensing Thermocouple for Creatbot D series 3d printers like DX, DE. Loose contacts with the temp sensor can cause inaccurate readings, which compromises the accuracy of your plastic flow. With a new temp sensor, you ensure optimal temperature control for your Creatbot DX & DE machines. This means more accurate & stronger 3d prints without under-extrusion & layer delamination.
  • esun pla esilk gold NZ

    Esun Silk PLA Gold

    $35.00 +gst
    For a long time, we've wanted PLA that has a true metallic shine to it without having to polish it. Please welcome Esun Silk metal PLA in 3 different metals - Gold, Silver, & Copper. This is a roll of Gold, & you have to see it to believe how amazing this new formulation of silk metal PLA is! Its the closest we've ever come to a PLA that actually shines like a real metal without having any metal in it. The shine also hides the print layer lines to a greater extent than other colours. And its Extremely affordable. We are sure our New Zealand 3D Printer enthusiasts will enjoy this material.
  • esun pla esilk silver NZ

    Esun Silk PLA Silver

    $35.00 +gst
    For a long time, we've wanted PLA that has a true metallic shine to it without having to polish it. Please welcome Esun Silk metal PLA in 3 different metals - Gold, Silver, & Copper. This is a roll of Silver, & you have to see it to believe how amazing this new formulation of silk metal PLA is! Its the closest we've ever come to a PLA that actually shines like a real metal without having any metal in it. The shine also hides the print layer lines to a greater extent than other colours. And its Extremely affordable. We are sure our Creative & Artistic 3D Printer users will enjoy this material. 3D Printed Trophies, Medals, Awards, & Jewellery is so easy & so good looking thanks to this filament.
  • Cartridge Heater Long Wire for 3D Printer NZ

    Creatbot D Printers Head Cartridge Heater

    $35.00 +gst
    Standard Tube Cartridge Heater that slots inside the hot block. Has long wire leads. Suitable for all Creatbot D series 3d printers including DX , DX Plus, DE , DE Plus for all single, dual or triple head models.
  • Creatbot hot end Cartridge heater

    Creatbot F series Printers Head Cartridge Heater

    $35.00 +gst
    Suitable for all Creatbot F series 3d printers including F430, F160, & their PEEK edition 3d printers. These are genuine Creatbot supplied 24V 60W cartridge heaters which can handle up to 450C reliably. We don't recommend cheaper 40W heaters as they only go to 250C reliably. Creatbot high temp hot ends support up to 420C so please be mindful the heater you use i Standard Tube Cartridge Heater that slots inside the hot block. Has a small connector to plug on the board so its really easy to install.
  • Generic Image Placeholder

    Creatbot F series 3D Printer Thermocouple Temperature Sensor

    $35.00 +gst
    This is a temperature sensing Thermocouple for Creatbot F series 3d printers. They will fit all Creatbot F430 & F160 3d printers.
  • Martensitic Steel Nozzle 3D Printers

    Creatbot Mk8 Martensitic Steel – Best 3D Printer Nozzle

    $35.00 +gst
    Best Quality Creatbot Hardened Martensitic Steel nozzle for 1.75mm 3d printers to print high temperature & composite reinforced materials. Perfect for 3d printing Carbon Fiber, Glass Fiber, Kevlar, etc on Creatbot F430, F160, PEEK300 & D600 Pro 3d printers. Martensitic Steel nozzles are the best nozzles presently available. They are the most durable nozzles compared to brass or stainless steel. Hardened martensitic steel allows much cleaner retractions than brass nozzles, which interestingly also improves the overall print quality. These nozzles can be used with Carbon Fiber filaments, however please be advised 0.4mm is on the smaller side for carbon to flow through well. Milled Carbon Fiber Nylon when printing small parts should be ok, but for larger longer prints, we recommend using 0.6mm nozzles for Carbon Fiber composite materials. These are well suited particularly for advanced materials that print at ultra high temps like PEEK, PEI Ultem, PPSU etc. Our nozzles are individually machined for optimum precision & longer life (not just die casted & pressed like inferior nozzles). Will suit all Creatbot F series & PEEK series 3D Printers we sell: Creatbot F160, F430, PEEK 300 & D600 Pro 3d printers Please choose from diameters 0.4, 0.6, 0.8 mm Our nozzles can also be used with other Mk8 compatible 3d printer heads.
  • esun silk pla bronze filament nz

    Esun Silk PLA 1.75mm – Bronze Metallic

    $35.00 +gst
    For a long time, we've wanted MORE PLA that has a true metallic shine to it without having to polish it. Please welcome Esun Silk metal PLA in BRONZE. This is a roll of Bronze & you have to see it to believe how amazing this new formulation of silk metal PLA is! Its the closest we've ever come to a PLA that actually shines like a real metal without having any metal in it. The shine also hides the print layer lines to a greater extent than other colours. And its Extremely affordable. We are sure our New Zealand 3D Printer enthusiasts will enjoy this material.
  • esun silk pla rose gold filament nz

    Esun Silk PLA 1.75mm – Rose Gold Metallic

    $35.00 +gst
    For a long time, we've wanted MORE PLA that has a true metallic shine to it without having to polish it. Please welcome Esun Silk metal PLA in ROSE GOLD. This is a roll of Rose Gold & you have to see it to believe how amazing this new formulation of silk metal PLA is! Its the closest we've ever come to a PLA that actually shines like a real metal without having any metal in it. The shine also hides the print layer lines to a greater extent than other colours. And its Extremely affordable. We are sure our New Zealand 3D Printer enthusiasts will enjoy this material.
  • Light Curing Putty Filler

    Phrozen Light Curing Putty – 3d print filler

    $39.00 +gst
    Restore broken parts to their original shape. Fill gaps and holes in models. Easy to sand and paint on after curing. Applicable on cured resin and plastic.

  • Phrozen Special Colour Changing Resin

    $39.00 +gst

    Phrozen Xmas special resin creates parts that can look as though they have a soft fluffy texture.

    This is great terrain & landscapes for desktop D&D models etc. It also lets you create ornaments that look like they have snow flakes on them.

    Colour Changing - Phrozen Xmas 3D Printing Resin develops a white gradient effect when heated to 205°F/96°C with a mini heat gun, creating beautiful snowy effects on your model surfaces. Soft and Shatterproof Decor - Print out soft and shatterproof ornaments for a worry-free holiday.  
  • Phrozen N FEP Film LCD Resin A4

    Phrozen PFA NFEP Film 290x210mm A4 10″ Mighty

    $40.00 +gst
    A4 Size NFEP Film for medium size SLA Resin 3D Printers NFEP film also called PFA Film is better than standard FEP film to reduce suction forces. It is basically a better quality of the non-stick surface so it reduces peel forces. So parts are less likely to stick to film or pop off from the build plate. This FEP Film is suitable for slightly bigger printers like Phrozen Sonic XL, Phrozen Mighty, Epax E10, Anycubic Mono, Elegoo Saturn etc Can also work with smaller DLP LCD 3D Printers, simply cut the sheet in half & you have 2 FEPs! This will work with Metal or Plastic vats. Very easy to use. Simply open the screws on your vat, remove the old FEP sheet, & put this sheet in place. Please see the video below to see how easily you can change the FEP on your Phrozen Sonic Mini Resin 3D Printers. You should change your FEP film when its cloudy, has excessive scratches, or you find the prints stick to it too easily rather than the bed. Depending on several factors, this is usually around 200 hrs of use. FEP is like a car tyre, you can have the best mechanics but without a good tyre, you're asking for trouble. We keep our prices on consumables cheap to help kiwis get the best results with 3d printers without prolonging the need to replace important components. Also check out the PlateBond Adhesion Promotor to help your base layers stick better to the bed of your resin 3d printer.
  • Generic Image Placeholder

    Creatbot D Extruder Head Feed Tube with Plugs

    $40.00 +gst
    The Teflon feed tube to connect the extruder to the head on Creatbot D series 3d printers like the Creatbot DX, DE etc. Includes the brass studs that the tube plugs into & locks into place. Screws on the head end & the extruder end. No assembly needed. Available for 3mm filament as well as 1.75mm filament based Creatbot D series machines. Please specify filament diameter, otherwise the default 3mm compatible tubes will be sent as they are more common. If your lugs break off, please consider buying this 1 piece ready tube.
  • Flashforge Creator 3 Stainless steel Nozzle 0.4mm

    FlashForge Creator 3 Nozzle 0.4mm Stainless

    $40.00 +gst
    This is a Genuine FlashForge brand nozzle for FlashForge Creator 3 & Creator 3 V2 3D Printers. These smart nozzles come with a one-piece heat brake built into them along, so just changing this one nozzle gets you a practically new 1 piece extrusion area. Simply unscrew the existing nozzle & screw the new one on, easy. Please remember to always heat your hot end before removing your nozzle.

  • Relay – Choose AC/DC

    $40.00 +gst
    These relays are used in many 3d printers including the Creatbot F430, D600 & PEEK300. Usually they are used for the Bed heater or the Chamber heater. Please select which relay you want from the list. The triger voltage is 3-32V DC. Please pick the correct type. Be sure before you install it. Relays blow instantly if you get the trigger voltage wrong, or connect the wrong end into the wrong point.
  • Cratbot D600 pro 2 & D1000 hot end temperature sensor

    Creatbot D600 pro2 D1000 Temp Sensor

    $40.00 +gst
    Loose contacts with the temp sensor can cause inaccurate readings, which compromises the accuracy of your plastic flow. With a new temp sensor, you ensure optimal temperature control for your Creatbot DX & DE machines. This means more accurate & stronger 3d prints without under-extrusion & layer delamination.
  • Creatbot hot end Cartridge heater

    Creatbot D600 pro 2 D1000 Cartridge Heater

    $40.00 +gst
    Suitable for Creatbot D600 Pro 2 & D1000 3d printers. These are genuine Creatbot supplied 24V 60W cartridge heaters which can handle up to 450C reliably. Creatbot high temp hot ends support up to 420C so please be mindful the heater you use. These have short wires. Not suited for older D600s, F430, F160, or PEEK edition 3d printers. Standard Tube Cartridge Heater that slots inside the hot block. Has a small connector to plug on the board so its really easy to install.
  • Creatbot 3D printer power detection chip NZ

    Creatbot Power Failure Detection Board

    $49.00 +gst
    Power Interruption Circuit board for Creatbot desktop series D & F series 3d printers including DM , DX / DX Plus & DE / DE Plus 3D, F160 / F160 PEEK & F430 PEEK 3D Printer Printers. For D600 PRO series, PEEK 300 & F1000 series, please contact us for the appropriate part. This circuit board detects if there is a power failure while your Creatbot 3d printer is printing. Then when power resumes & the printer is started, the option to resume to resume the existing print is offered. This circuit is not critical, & the printer can still continue to be used with the board's white wire unplugged. Locations where there are excessive power outages seem to cause this board to blow out more frequently than other places. This is mainly because of spikes & voltage fluctuations in such locations. If you experience the need to frequently replace these, we recommend connecting your printer through a spike protector.
  • Mayku Vacuum Form Sheets Pack

    Mayku Form HIPS High Impact Polystyrene Sheets 0.5mm 30 Pack

    $49.00 +gst

    Form sheets for FormBox Desktop Vacuum Former - 0.5mm thickness

    Mayku Form Sheets provides 30x 0.5mm versatile, easy-to-use white sheets, which allow forming with high accuracy on your Mayku FormBox vacumm former. Great for product packaging, prototyping, and enhancing decorative craft projects. Has a non-stick type white laminated surface that makes it easier to work with a wide range of materials like Plaster of Paris, Silicone Putty, & many other forming pastes. Fully recyclable, partially made from recycled plastic waste.
    • Durable, Replicates fine detail & Easy to cut
    • White, Satin surface thats Ready to pain
    • MAKE YOUR IDEAS REAL: Use Form Sheets with the Makyu FormBox to create your very own desktop production line. Whether you’re crafting by hand or partnering with your 3D printer, you can create a factory finish without the factory.
    • FULLY REUSABLE: Use the same molds repeatedly, for minimum waste and maximum efficiency.
    • EASY REMOVAL: The slight flex and non-stick surface that the sheet provides ensures that your templates and casts can be removed with ease.
    • RECYCLABLE: These sheets are recyclable, making them an eco-friendly option. These are Partly made from recycled plastic waste as well.
    In stock right here in Auckland & ready to ship today. Check out the Vacuum Former to see how you can make YOUR IDEAS COME TO LIFE.
  • FlashForge Creator 3 Hardened Steel nozzle 0.6mm

    FlashForge Creator 3 Nozzle 0.6mm Hardened Steel

    $50.00 +gst
    This is a Genuine FlashForge brand nozzle Hardened steel nozzle suitable to 3d print Carbon Fiber filaments as well as higher temperature materials. These nozzles are suitable for FlashForge Creator 3 & Creator 3 V2 3D Printers. These smart nozzles come with a one-piece heat brake built into them, so just changing this one nozzle gets you a practically new 1 piece extrusion area. 0.6mm nozzle diameter is recommended for Carbon Fiber, Glass, & Wood based filaments as it reduces the chances of blockages & under extrusion over longer prints. These nozzles also double your effective throughput, thereby allowing your 3d prints to be completed much faster, usually twice as fast. The 0.6mm hardened is our best selling nozzle that does every kind of 3d printing really well. We really recommend it. Simply unscrew the existing nozzle & screw the new one on, easy. Please remember to always heat your hot end before removing your nozzle.

  • 3D4makers Natural white C8 Filament – 750g

    $64.00 +gst
    3D4Makers C8 Advanced 3D Printing Filament 1.75mm 750g Why use Facilan™ C8 filament? Facilan C8 is a filament designed specially for Product Manufacturing using 3D Printing.
    • Higher tensile strength than ABS, & higher impact strength than PLA
    • On most printers, C8 can 3D Print without visible layers.
    • Facilan C8 has higher layer adhesion than other functional 3D printing materials.
    • C8 has a smooth even matte finish, offering excellent surface finish compared to other FDM materials.
    • The material has a soft touch feel.
    • Supports high throughput manufacturing, so its perfect high speed 3d printers or larger nozzles.
  • Flashforge adventurer 5 0.4mm nozzle

    FlashForge Adventurer 5 Nozzle Assembly

    $65.00 +gst
    This is the upgraded high speed nozzle for the FlashForge Adventurer 5M & 5M Pro 3d printers. It can print faster & hotter upto 280C on compatible Adventurer 5 series 3d printers. It is not for older Adventurer 3 or 4 models. This is also an easy switch nozzle, they look & work exactly like the previous 240C nozzle with the added advantage of printing at higher temperature & faster speeds. This unique system allows you to quickly switch the nozzle, & heater block without any assembly. Just press the clamps on the sides of the head to push this assembly out, & then insert a new one in.

  • Phrozen PFA NFEP film 450x280mm – For Large 15″ Mega

    $65.00 +gst
    PFA (NFEP) is an upgrade to standard FEP film. 450*280mm for large size Resin 3D Printers NFEP lowers suction forces & greatly increases film life. It is quite durable & doesn't tear easily. This N-FEP Film is suitable for big printers like the 15" Phrozen Mega8k, Transform, etc Can also work with smaller DLP LCD 3D Printers, simply cut the sheet in half & you have more films for next time.
  • phrozen sonic mini build plate au nz

    Phrozen Sonic Mini & Mini 4K Build Plate

    $69.00 +gst
    This is the genuine full metal build platform for Phrozen Sonic Mini & Mini 4K 3D printers. It is a thick solid bed to allow maximum print speeds without distortion. If you print a lot, particularly if you print larger layers at once, then this full metal build plate is the best choice.
  • Creatbot F430 extruder head mini board

    F430 Extruder Head Miniboard

    $69.00 +gst
    This is the small PCB that goes behind the extruders of a Creatbot F430 head. The main ribbon cable connects to it from the motherboard underneath the machine. And other connectors such as the temp sensors, cartridge heaters, probe etc plug into this little board.
  • Resin 3d print processing kit

    Phrozen Post Processing Kit for Resin 3D Prints

    $69.00 +gst
    Why buy this kit? 
    • Everything you need is with you from the start
    It provides all the essential tools for pre-printing, post-printing, and environmental maintenance, ensuring every stage of the printing process is as smooth as it should be.
    • Diverse Scraper Choices
    Multiple scraper options for different needs: a plastic scraper to clean your vat and a metal scraper to remove models from the build plate.
    • Resin Recycling Made Easy
    Use the wire mesh and foldable funnel to make resin recycling quick and convenient.
    • Effortless Support Removal
    Removing model supports is quick and easy, giving your models a smooth clean surface.
    • Keeping You Safe and Clean
    Gloves, silicone pads, and cleaning cloths are included to keep your workspace tidy, and your hands protected from resin and chemicals. The kit contains:
    • Plastic scraper x1
    • Metal scraper x1
    • Silicone scraper x1
    • Clippers x1
    • Sandpaper x1
    • Wire mesh x1
    • Collapsable funnel x1
    • Brush x1
    • Gloves x1
    • Silicone mat x1
    • Cleaning cloth x1