3D Printer Shop

  • Phrozen Ultra High Temperature Resin - now in NZ

    Excellent for 3D Prints with high precision & HIGH TEMPERATURE RESISTANCE up to 220 deg C! With 220 deg C temp resistance, the TR300 finally unleashes advanced application capability for low cost REsin 3D Printers. It is also tougher than most resins on the market, & all this for a very affordable price. EASY POST-PROCESSING: Coloring, drilling and grinding are all suitable. This is the upgrade to the popular TR250LV Resin that has been one of the biggest selling resins in our Phrozen brand. A great choice for vulcanized rubber molding process, such as jewelry casting, GK kit, and all other high-heat applications, thanks to high temperature resistance and hardness. Weight 1Kg Grey Colour
  • Genuine Creatbot Throat Tube which connects the hot block into the extruder mechanism. This is the teflon tube lined version which makes it easy to print PLA, PETg etc thanks to the teflon liner. But it will only operate up to 260C, please do not print hotter than that else you will damage the teflon liner. The heat sink & the nozzle is attached at the bottom of this piece. If you have replaced nozzles & still find there are extrusion issues, please consider changing this part. This tube is considered part of the heat break mechanisk, & has a partial teflon coating on the top to aim smooth extrusion. So it is recommend you change this tube as needed for the best uniformity in extrusion as well as reduction of jams or blockages particular in longer 3d prints. Will suit all Creatbot D series 3D Printers we sell including F160, F160 PEEK, F430, F430 PEEK, D600 PRO (not the older D600)
  • Genuine Creatbot Throat Tube which connects the hot block into the extruder mechanism. This is the Full Matal hot end which doesn't have a teflon liner inside, allowing you to easily print Carbon Fiber as well as high temp materials up to 450C. If you are new to 3d printing, you might find it useful to start with the other Teflon lined heat brake version as it can be easier to print common materials like PLA & ABS with that one. The heat sink & the nozzle is attached at the bottom of this piece. If you have replaced nozzles & still find there are extrusion issues, please consider changing this part. This tube is considered part of the heat break mechanisk, & has a partial teflon coating on the top to aim smooth extrusion. So it is recommend you change this tube as needed for the best uniformity in extrusion as well as reduction of jams or blockages particular in longer 3d prints. Will suit all Creatbot D series 3D Printers we sell including F160, F160 PEEK, F430, F430 PEEK, D600 PRO (not the older D600)
  • The CreatBot PEEK-300 is an ultra performance 3D printer specially optimised to work with ultra high performance advanced materials such as PEEK, PEKK, PEI (Ultem tm), etc polymers in a dedicated no-compromise environment. It is designed for high reliability and industrail performance at a price that is substantially cheaper than industrial additive manufacturing systems. 3D Print any advanced polymer filaments without any warping or shrinkage issues to deal with regardless of size. And thanks to the Patented DAS system, you won't need to anneal your prototpyes, saving you several hours & resources in post-print processing. An outline simple Industry specific use cases :
    • Engine manfolds can be 3d printed using PEI 1010, which handles 200 deg C operating temp.
    • FDA approved parts can be 3d printed using PEI 9085 to aid substantial weight reduction on aircraft, with a weight to strength ratio that is greater than aluminum, with all the necessary flame retardant properties.
    • Hip, Knee & Jaw replacements for interbody transplants can be 3d printed using PEEK instead of titanium to aid MRI friendly post operative assessment & any future surgical planning.
    • Medical tooling can be 3d printed using PPSF / PPSU & can survive commercial autoclave sterlisation exceeding 230 deg C & be exposed to bodily fluids as it is rated for use in biodiverse aqueus conditions.
    Ultra performance Polymers & Composites are the future in additive manufacturing of production parts on demand. Special Features found only on the Creatbot PEEK 300:
    • Patented Direct Annealing Hot end
    • Water cooled triple heat isolatation system
    • 500 deg C Dual Extruder Heads
    • 120 deg C Active Thermal Chamber
    • 200 deg C Heated Bed
    Build volume 300 x 300mm x 400mm height From the company that brought you the first affordable desktop grade PEEK capable 3D Printer, now comes a beast that is designed to deliver cutting edge factory parts on demand in Automotive, Aerospace, Medical, & R&D specifically using PEEK & its related family of plastic filaments.
  • Esun Advanced Super Tough PLA 1Kg White Natural 3D Printer Filament now in NZ

    Our much loved Esun PLA+ now has an upgrade! Do you want to 3D Print with one of the strongest PLA filaments available right now? If you want high impact resistance & excellent overall part strength, look no further than Esun's new PLA-ST 3d Filament. This is the classic eSun Solid Black. Same classic kiwi black as you have come to expect from 3D Printer Store. ESun offer a very accurate & well respected PLA 3d printing filament that has taken the world by storm. PLA is naturally sourced, compostible & bio-degradable. It is the easiest material to 3d print. In the past, if you wanted functionality (but didnt need high temperature resistance), you still had to use other alternatives like PetG / ABS which were harder to work with. Now you can 3d print with the ease of PLA while getting many functional advantages & yet be eco-friendly thanks to eSun PLA plus! We are Authorised Reseller of eSun & our PLA+ 3d printer filament is stocked right here in NZ so we can bring our kiwi 3d customers great quality BRANDED pla filament for a superb price.
  • The Teflon feed tube to connect the extruder to the head on Creatbot D series 3d printers like the Creatbot DX, DE etc. Includes the brass studs that the tube plugs into & locks into place. Screws on the head end & the extruder end. No assembly needed. Available for 3mm filament as well as 1.75mm filament based Creatbot D series machines. Please specify filament diameter, otherwise the default 3mm compatible tubes will be sent as they are more common. If your lugs break off, please consider buying this 1 piece ready tube.
  • Best Quality Creatbot Martensitic Hardened Steel nozzle for 1.75mm 3d printers. Martensitic Steel nozzles are the best nozzles presently avaialble. They are the most durable nozzles compared to brass or stainless steel. Hardened martensitic steel allows much cleaner retractions than brass nozzles, which interestingly also improves the overall print quality. These nozzles can be used with Carbon Fiber filaments. They are well suited particularly for advanced materials that print at ultra high temps, & even with carbon fibre added to such filaments. Our nozzles are individually machined for optimum precision & longer life (not just die casted like cheap nozzles). Will suit all Creatbot F series 3D Printers we sell: Creatbot F160, F160 PEEK, F430 & F430 PEEK edition 3d printers We stock a wide range of nozzle diameters 0.3, 0.4, 0.6, 0.8 mm Our nozzles can also be used with other Mk8 compatible 3d printer heads.
  • Best Quality Creatbot Martensitic Hardened Steel nozzle for 1.75mm 3d printers. Martensitic Steel nozzles are the best nozzles presently avaialble. They are the most durable nozzles compared to brass or stainless steel. Hardened martensitic steel allows much cleaner retractions than brass nozzles, which interestingly also improves the overall print quality. These nozzles can be used with Carbon Fiber filaments, however please be advised 0.4mm is on the edge, its a bit small for carbon to flow through well. Milled Carbon Fiber Nylon when printing small parts should be ok, but for larger longer prints, recommend using 0.6mm nozzles. These are well suited particularly for advanced materials that print at ultra high temps like PEEK, PEI Ultem, PPSU etc. Our nozzles are individually machined for optimum precision & longer life (not just die casted like cheap nozzles). Will suit all Creatbot F series 3D Printers we sell: Creatbot F160, F160 PEEK, F430 & F430 PEEK edition 3d printers We stock a wide range of nozzle diameters 0.3, 0.4, 0.6, 0.8 mm Our nozzles can also be used with other Mk8 compatible 3d printer heads.
  • Genuine Creatbot Stainless nozzle for 1.75mm 3d printers. Hard Stainless nozzles have much longer life than common brass nozzles. Steel allows much cleaner retractions, which interestingly also improves the overall print quality. Stainless steel nozzles can be used with Carbon Fiber. We also sell Hardened martensitic steel nozzles. They are the best nozzles currently available, & are even better suited particularly for advanced materials that print at ultra high temps, & when carbon fibre is also added to such filaments. Our nozzles are individually machined for optimum precision & longer life (not just die casted like cheap nozzles). Will suit all Creatbot F series 3D Printers we sell: Creatbot F160, F160 PEEK, F430 & F430 PEEK edition 3d printers We stock a wide range of nozzle diameters 0.3, 0.4, 0.6, 0.8 mm Our nozzles can also be used with other Mk8 compatible 3d printer heads.
  • This is the flexible metal plate that fits on the new magnetic beds of FlashForge Creator 3 3D Printers. It has a Polycarbonate re-inforced build surface that provides excellent adhesion to most common materials. However, for Nylon based materials, we still recommend you put a thin layer of the glue stick on it.
  • Phrozen Sonic Mini 8K 3D Printer - NZ Stock!

    With a resolution of 22 µm and 1152 ppi, the Sonic Mini 8K is the Highest Resolution 8K Monochrome LCD 3d printer in the market. The only printer of this size to feature an 8K Monochrome LCD & a ParaLED light source, the new Sonic Mini is the best entry level resin 3d printer in the world. The XY resolution is a super crisp 22 micron, making this small printer particularly suited for Jewellery & 30mm table top gaming miniatures. The Sonic Mini 8K is also largest build plate in its class whilst offering this insane resolution. Its 7.1 inch screen enables a build size of 165 x 72 x 180 mm It also comes with a long list of compatible resins from Phrozen as well as a few other popular brands, including castable resins. This is the closest print quality an LCD printer has ever come to a DLP 3d printer. And you can get this at an amazingly low price. Happy Resin 3D Printing! Full Tech Specs below:
  • This is the upgraded 265C higher temp nozzle for the FlashForge Adventurer 3. It can be used instead of the standard 240C temperature nozzles in all compatible FlashForge adverturer 3 3d printers. This is also an easy switch nozzle, they look & work exactly like the previous 240C nozzle with the added advantage of printing to a slightly higher temperture. This is unique system allows you to quickly switch the nozzle, & heater block without any assembly. Just press the clamps on the sides of the head to push this assembly out, & then insert a new one in.
  • This is a Genuine FlashForge brand nozzle for FlashForge Creator Pro 2 IDEX 3D Printers. It is common for nozzles to wear or block after a period of use, & need replacing. Simply unscrew the existing nozzle & screw the new one on, easy. Please remember to always heat your hot end before removing your nozzle.
  • Genuine FlashForge nozzle for the FlashForge Guider 2S 3D Printer. It is common for nozzles to wear or block after a period of use, & need replacing. Simply unscrew the existing nozzle & screw the new one on, easy. Please remember to always heat your hot end before removing your nozzle.
  • Esun ePA12 Nylon Filament 1.75mm 1Kg White

    Nylon 12 has several advantages over the usual Nylon 6 filaments. It has very low moisture abosrption, & far better UV performance. Higher Strength, Better Flexural Strength, High Surface Abrasion Resistance, Excellent Chemical Resistance, & works well with Lubricants. Nylon is suited perfectly in lubricating applications for bearings, gears & pulleys with belts. Nylon is a challenging material to 3d print. Active Heated chamber recommended for the best performance. Please consider advanced 3d printers such as the Creatbot F-430 3D Printer if you intend to 3D Print Functional parts frequently.
  • Genuine E10 resin tray molded using non corrosive plastic. This vat fits all EPAX E10 series 3D printers. Works with the original 8.9" screen E10 as well the new 10.1" E10 5K 3d printers. Each vat comes with a sheet of nFEP film already installed, ready to use. Just remove the old tray out & slide the new one in. Thats it, easy installation.
    • Molded tank allows for cheap replacements and extras for switching out resin on the fly
    • Fibreglass reinforced plastic sports increased durability and resistance to corrosion and resin.
    • It is equipped with a rubber seal to ensure that the vat is water-tight to help avoid resin leaks.
    • E10 Vat Max Volume 1500mL without build platform and 700mL with build platform