Luvocom® 3F PEKK 50082 Filament – Easy Print High Performance

Luvocom® 3F PEKK 50082 Filament – Easy Print High Performance

$300.00 +gst

Luvocom® 3F PEKK 50082 3D Filament

PEKK Filament is easier to print than regular PEEK filament with better layer adhesion while offering similar strength and resistance properties, & better dimensional stability than PEEK. PEKK also has a higher Tg Glass Transition Temperature than PEEK.

This unique modified neat PEKK is a low warp formluation that provides dimensional stability in delivering semi-crystalline parts with no warp.

Polyether Ketone Ketone (PEKK) is a semi-crystaline thermoplastic in the Polyaryletherketone family. With high heat resistance, chemical resistance , has the ability to withstand high mechanical loads, is inherent flame retardant and has unique tribological properties.

PEKK Filament has a tuneable crystallization rate which allows FFF or FDM users to take advantage of both the extreme performance of PAEKs and easier processing of amorphous materials.

Made in Netherlands by 3d4makers using Lehvoss genuine luvocom resin.

We always recommend an active heated chamber for 3d printing all advnaced materials including PEKK. But this particular grade gives you a good chance of printing simpler smaller parts without a heated chamber.

200g roll in a natural brown beige colour.

Want to 3d print this material routinely? Consider our Creatbot PEEK-300 industrial material 3d printer.

Description

Luvocom® 3F PEKK 50082 Filament (Polyether Ketone Ketone) Filament

Polyether Ketone Ketone (PEKK) is a semi-crystaline thermoplastic in the Polyaryletherketone family. With high heat resistance, chemical resistance, has the ability to withstand high mechanical loads, is inherent flame retardant and has unique tribological properties.

LUVOCOM® 3F PEKK 50082 is engineered to outperform the standard PEKK materials available in the market. It comes with enhanced flow behaviour which improves the printability and layer adhesion.

  • Specially optimized for industrial 3D printing
  • Isotropic shrinkage characteristics
  • Non flammable (UL94 V-0)
  • Continuous service temperature 255°C
  • Service temperature 300°C (during lifetime max. 200h)
  • Highly chemically-resistant
  • Low warpage

LUVOCOM® 3F PEKK 50082 Material Properties

  • Density 1.27 g/cm³
  • Tensile Strength 90 MPa
  • Elongation at maximum force 5%
  • Modulus of elasticity 3 GPa
  • Flexural strength 150 MPa
  • Flexural elongation at max. force 6%
  • Flexural modulus 2,5 GPa

Print Settings 

  • Print Temperature: 360°C (340-380°C).
  • Bed Temperature: 110-140°C
  • Adhesion: Magigoo HT on Carbon fiber plate or a PEI Sheet
  • Print Speed: 20-50 mm/s Please start at 20mm.
  • Drying Instruction: 4 hours, 120°C

Additional information

Weight 1 kg