Phrozen SPEED Grey – Currently the Fastest 3D Printing Resin

Phrozen SPEED Grey – Currently the Fastest 3D Printing Resin

$80.00 +gst

In stock

Phrozen Speed – The fastest lcd 3D Printing Resin – Now in New Zealand!

Print Up To 8X Faster, & for a price never seen before.
Phrozen Speed resin has been specially formulated to print with ultra fast curing time at a broad range of layer heights.
It allows you to print perfectly with larger layer heights, such as at 150 or 200 micron, which is a bonus for large parts that dont have minute details.
This is the ideal choice for printing large models like props or prototypes that have a large size but dont have the detail needed to be wasting your time printing them at very thin layer heights like 50 microns.

So you can print a 26cm tall model in just 6.5 hrs!

This Phrozen Resin is optimised for all popular 405nm LCD 3d printers including Phrozen 3D Printers, Anycubic, Wanhao, Creality, Elegoo, etc

Cure time as low as 4 seconds per layer on Phrozen’s Sonic 3d printers when printing at massive 200µm layer thickness.

Weight: 1 Kg bottle.
In stock right here in Auckland & ready to ship.

In stock


This resin is formulated to print with a broad range of layer heights from the common 50 micron through to massive 300 microns layers.
Traditional resins tend to not work well after around 100 microns as the monomers & photoinitiaters are small & will not offer full light transmission in thicker layers.
With smaller particles also comes the need to cure more of them, which is great for small high detail objects but a complete waste of time for large parts.
The entire 400mm build height of a Phrozen Mega 8k can be printed in just 12hrs with ACF film. Imagine that!

Tech Specs

  • Weight: 1 kg per bottle
  • Density: 1.10 g/cm3
  • Viscosity235 cP
  • Tensile Stress at Break: 25 MPa
  • Young’s Modulus: 900 MPa
  • Elongation at Break: 20 %
  • Surface Hardness: 79 Shore D
  • Notched Izod Impact: 6.31 J/m

Additional information

Weight 1 kg