3D Printer Shop

Sale!

Esun PetG 3D Filament 1.75mm 1Kg SOLID RED

+gst

Pet-G is very good functional material & its easier to work with than Abs. It is the same food safe PET thats used in water bottles etc It does not shrink or warp as easily as Abs does, & thus provides good dimensional accuracy for beginners who want to move up from PLA+. It provides excellent finish, high tensile strength, & has a higher Glass Transition Temperature of 70 deg C. It is highly recommended for those who want high temperature & high strength properties compared to PLA. Esun PetG 1.75mm 1Kg RED is a solid, bright red colour, not translucent. For recommended settings on how to 3D Print PETg & TGlase please read our FAQ here

Sale!

petg eSun Black 3d printer Filament New Zealand

eSUN PETg 3D Filament 1Kg SOLID BLACK

+gst

Esun PETg Filament 1kg Black PetG+ is a very good functional material & its easier to work with than ABS. It is the same food safe PET thats used in water bottles etc It does not shrink or warp as easily as Abs does, & thus provides good dimensional accuracy for beginners who want to move up from PLA+. If you are going to be using a high speed 3d printer like Bambulab, or 3d printing with a higher flow rate (such as using larger nozzles), we highly recommend using the our new PETG+HS, a high speed, low stringing PETg formulation designed specifically for high output printing. It provides excellent finish, high tensile strength, & has a high temperature Glass Transition Temperature of 80 deg C. It is highly recommended for those who want high temperature & high strength properties compared to PLA. Esun PetG 1Kg 1.75mm SOLID BLACK

Esun PETg CF – Carbon Fiber PETg 3D Filament – Black 1kg

$45.00 +gst

Esun PETg CF Filament

Made using PETG and High-Modulus Carbon Fiber, PETG-CF is a high strength, matted, easy to 3d print CF reinforced 3D printing filament. PETG CF is easier to print than PET CF thanks to better low & reduced warping.

Carbon Fibre coupled with the higher temperature handling & stiffness of PETG presents an advantage over other PLA based carbon fibre filaments that soften at lower temperatures, since PLA will soften faster than Petg & is also a weaker material.

Dark coloured PLA softens in direct sunlight in summer, for eg, inside a car. But PETg handles hotter temperatures better.

This filament is ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, ease of printing & able to be in the sun.

Petg is also easier to 3d print than Nylon in some 3d printers.

This filament is an excellent alternative to carbon fiber Nylon filaments in case you need lower moisture absorption, & higher stiffness compared to a Nylon based polymer.

1.75mm 1kg roll of PetG Carbon Fiber Filament

eSUN PLA+ Cold White – 1Kg

$26.99 +gst

Esun Advanced PLA Plus 1Kg Cold White 3D Printer Filament now in NZ

Do you want to 3D Print with PLA & still want higher flexibility, impact strength & easy to remove supports? Please welcome the new esun PLA plus! As easy to print as PLA & yet highly functional, PLA+ is the future of PLA. This is the eSun Cold White filament. ESun offer a very accurate & well respected PLA 3d printing filament that has taken the world by storm. PLA is naturally sourced, compostible & bio-degradable. It is the easiest material to 3d print. In the past, if you wanted functionality (but didn't need high temperature resistance), you still had to use other alternatives like PetG / ABS which were harder to work with. Now you can 3d print with the ease of PLA while getting many functional advantages & yet be eco-friendly thanks to eSun PLA plus! We are Authorised Reseller of eSun & our PLA+ 3d printer filament is stocked right here in NZ so we can bring our kiwi 3d customers great quality BRANDED pla filament for a superb price. A quick note about printing eSun PLA+ - In our experience it works best slightly hotter than standard PLA, at around the 210-220C mark. For eg, if you print PLA between 190-200C usually (like we do), then its recommended you go to 210-220C for PLA plus. Of course there are a lot of factors around 3d printing extruder temperature, but start at 210C & see how you.

eSUN PLA+ Grey – 1Kg

$26.99 +gst

Esun Advanced PLA Plus 1Kg Grey 3D Printer Filament now in NZ

Do you want to 3D Print with PLA & still want higher flexibility, impact strength & easy to remove supports? Please welcome the new esun PLA plus! As easy to print as PLA & yet highly functional, PLA+ is the future of PLA. Our range of eSun PLA+ colours is growing everyday. This is the eSun Solid Grey. ESun offer a very accurate & well respected PLA 3d printing filament that has taken the world by storm. PLA is naturally sourced, compostible & bio-degradable. It is the easiest material to 3d print. In the past, if you wanted functionality (but didnt need high temperature resistance), you still had to use other alternatives like PetG / ABS which were harder to work with. Now you can 3d print with the ease of PLA while getting many functional advantages & yet be eco-friendly thanks to eSun PLA plus! We are Authorised Reseller of eSun & our PLA+ 3d printer filament is stocked right here in NZ so we can bring our kiwi 3d customers great quality BRANDED pla filament for a superb price. A quick note about printing eSun PLA+ - In our experience it works best slightly hotter than standard PLA. For eg, if you print PLA between 190-200C usually (like we do), then its recommended you go to 210-220C for PLA plus. Of course there are a lot of factors around 3d printing extruder temperature, but start at 210C & see how you.

eSUN PLA+ Silver – 1Kg

$26.99 +gst

Esun Advanced PLA Plus 1Kg Silver 3D Printer Filament now in NZ

Do you want to 3D Print with PLA & still want higher flexibility, impact strength & easy to remove supports? Please welcome the new esun PLA plus! As easy to print as PLA & yet highly functional, PLA+ is the future of PLA. Our range of eSun PLA+ colours is growing everyday. This is the eSun Solid Silver. ESun offer a very accurate & well respected PLA 3d printing filament that has taken the world by storm. PLA is naturally sourced, compostible & bio-degradable. It is the easiest material to 3d print. In the past, if you wanted functionality (but didnt need high temperature resistance), you still had to use other alternatives like PetG / ABS which were harder to work with. Now you can 3d print with the ease of PLA while getting many functional advantages & yet be eco-friendly thanks to eSun PLA plus! We are Authorised Reseller of eSun & our PLA+ 3d printer filament is stocked right here in NZ so we can bring our kiwi 3d customers great quality BRANDED pla filament for a superb price. A quick note about printing eSun PLA+ - In our experience it works best slightly hotter than standard PLA. For eg, if you print PLA between 190-200C usually (like we do), then its recommended you go to 210-220C for PLA plus. Of course there are a lot of factors around 3d printing extruder temperature, but start at 210C & see how you.

Sale!

Esun PLA+HS High Speed PLA+ Black Filament

+gst

Esun High Speed PLA Plus 1Kg Black 3D Printer Filament now in NZ

PLA+ HS is the new version of the PLA+ you love, now with High Speed 3d printing capability! Get the higher flexibility, impact strength & easy to remove supports that you like about PLA+, with faster build speeds on any 3d printer including Bambu labs, Creality K, etc. As easy to print as standard PLA+ & yet highly functional, PLA+HS is the future of PLA.

Esun Silk PLA 1.75mm – Rose Gold Metallic

$35.00 +gst

For a long time, we've wanted MORE PLA that has a true metallic shine to it without having to polish it. Please welcome Esun Silk metal PLA in ROSE GOLD. This is a roll of Rose Gold & you have to see it to believe how amazing this new formulation of silk metal PLA is! Its the closest we've ever come to a PLA that actually shines like a real metal without having any metal in it. The shine also hides the print layer lines to a greater extent than other colours. And its Extremely affordable. We are sure our New Zealand 3D Printer enthusiasts will enjoy this material.

F430 Extruder Cable

$70.00 +gst

This is the long cable that connects the extruder board to the main board. Used by the Creatbot F430 3d printer. There are 2 versions of this cable. The older machines use a flat Ribbon cable. The newer machines use a Round cable. Please specify which one you would like in the shipping notes when you place the order.

F430 Extruder Head Miniboard

$69.00 +gst

This is the small PCB that goes behind the extruders of a Creatbot F430 head. The main ribbon cable connects to it from the motherboard underneath the machine. And other connectors such as the temp sensors, cartridge heaters, probe etc plug into this little board.

FlashForge Adventurer 5 Nozzle Assembly

$65.00 +gst

This is the upgraded high speed nozzle for the FlashForge Adventurer 5M & 5M Pro 3d printers. It can print faster & hotter upto 280C on compatible Adventurer 5 series 3d printers. It is not for older Adventurer 3 or 4 models. This is also an easy switch nozzle, they look & work exactly like the previous 240C nozzle with the added advantage of printing at higher temperature & faster speeds. This unique system allows you to quickly switch the nozzle, & heater block without any assembly. Just press the clamps on the sides of the head to push this assembly out, & then insert a new one in.

Flashforge Creator 3 Stainless steel Nozzle 0.4mm

FlashForge Creator 3 Nozzle 0.4mm Stainless

$40.00 +gst

This is a Genuine FlashForge brand nozzle for FlashForge Creator 3 & Creator 3 V2 3D Printers. These smart nozzles come with a one-piece heat brake built into them along, so just changing this one nozzle gets you a practically new 1 piece extrusion area. Simply unscrew the existing nozzle & screw the new one on, easy. Please remember to always heat your hot end before removing your nozzle.

FlashForge Creator 3 Hardened Steel nozzle 0.6mm

FlashForge Creator 3 Nozzle 0.6mm Hardened Steel

$50.00 +gst

This is a Genuine FlashForge brand nozzle Hardened steel nozzle suitable to 3d print Carbon Fiber filaments as well as higher temperature materials. These nozzles are suitable for FlashForge Creator 3 & Creator 3 V2 3D Printers. These smart nozzles come with a one-piece heat brake built into them, so just changing this one nozzle gets you a practically new 1 piece extrusion area. 0.6mm nozzle diameter is recommended for Carbon Fiber, Glass, & Wood based filaments as it reduces the chances of blockages & under extrusion over longer prints. These nozzles also double your effective throughput, thereby allowing your 3d prints to be completed much faster, usually twice as fast. The 0.6mm hardened is our best selling nozzle that does every kind of 3d printing really well. We really recommend it. Simply unscrew the existing nozzle & screw the new one on, easy. Please remember to always heat your hot end before removing your nozzle.

FlashForge Creator 3 Pro Hardened Steel Nozzle

$20.00 +gst

This is a Genuine FlashForge brand Hardened steel nozzle suitable to 3d print Carbon Fiber filaments as well as higher temperature materials. These hard nozzles are suitable for FlashForge Creator 3 PRO & Creator 4 series 3d printers. They will not fit the Creator 3 V2 or older Creator 3 machines with the long 1 piece nozzle type.

FlashForge Creator 3 Pro Hot End Nozzle Assembly

$90.00 +gst

This is the full hot end which gives you new extrusion components under the motor. It includes the heat brake, throat tube, hot block, & a 0.4mm nozzle. It comes fitted with a new cartridge heater & a thermocouple temp sensor as well.

FlashForge Creator 3d printer hot end thermocouple

FlashForge Creator Hot End Thermocouple Temp sensor

$30.00 +gst

This is a temperature sensor for the newer FlashForge Creator Pro 2 & Creator 3 Pro 3d printers. It is a threaded type that fits into the hot end block. This is not for older flashforge Creator series printers.

FlashForge Filament Guide Tube

$10.00 +gst

Suitable for FlashForge 3D Printers including Adventurer , Finder, Inventor, Guider & similar 3d printers.

FlashForge XY Sensor Switch for Creator Guider etc

$19.00 +gst

Flashforge X-Sensor Switch Board v0.4

A versatile end stop limit switch used by many FlashForge 3D printers for X, Y, and Z axi. Compatible with models like Creator 4, Creator 3 Pro, Guider 2S, etc. Please check your existing printer & switch to confirm compatibility with your particular printer.

Head Miniboard for Wanhao 3d printers

$19.00 +gst

Head board for 3d printers like Wanhao i3 plus mk2, D6, D9, D9 mk2 etc. This is the little PCB that sits on top of the main head where you plug in the heater, temp sensors, etc.

liquid resin 3d prints high precision injection molded factory quality part

High Performance Large scale Resin 3D Print Sample

$320.00 +gst

We can make a sample 3d print made using any of our High Performance Engineering Resins. This service is for 3d printer buyers who wish to test the machine & the resin for a specific application before buying the machine. Please contact us before purchasing to discuss your project. This is usually for parts up to 300x400mm size, on a case-by-case basis.

Sale!

Kiwifil 100% Recycled 3D Prints rPLA Filament

+gst

The ultimate closed-loop recycled filament made right here in New Zealand!
This rPLA is made entirely from real 3D prints collected from customers — 100% post-consumer PLA, recovered and reborn. Failed Benchies, mountains of supports, snapped Baby Yodas, & broken prototypes … all carefully sorted, shredded, melted, filtered, and extruded back into high-quality filament.

Print quality you can trust.
Our “Recycled Red” rPLA Pro delivers a smooth, consistent finish and performs just like premium virgin PLA. Because it’s genuinely recycled, the exact shade of red may vary slightly between batches.

When you're tinkering, & don't care about the colour, you can care for the planet.

You reduce the carbon foot print, reduce wastae, get top quality 100% Recycled PLA filament, & support a cutting edge Kiwi manufacturer with a difference. So using 100% RPLA is a win-win.

We're really proud to offer KiwiFil's New Zealand made sustainably sourced R-PLA Pro filament from KiwiFil.

Sale!

Kiwifil rPETg Filament – Popular Colours

+gst

rPETG filament is Proudly made in New Zealand by reusing offcuts & waste of the same high quality PETg material thats used in food packaging manufacturing. So the plastic that would otherwise go to waste is turned into world class filament! This is a great way to manufacture parts using a very common plastic, while significantly reducing the carbon footprint of your 3d printed items. Sustainability with Style - RPETg prints like any petg filament that is extruded from conventional pellet raw material. We've got a whole lot of colours in, & more are on the way. If you don't see a colour you like, please let us know. If you're looking for R-PETg in spectacular colours, please see our Kiwifil R-PETg Speciality Filaments.

Kiwifil rPETg Filament – Specialty Colours

$45.00 +gst

R-PETG in striking colours - not the boring colours you usually see petg filament in. Proudly Made in New Zealand by reusing offcuts & waste of the same high quality PETg material thats used in food packaging manufacturing. So the plastic that would otherwise go to waste is turned into world class filament - now isn't that clever..? Sustainability with Style - RPETg works like any petg filament that is extruded from conventional pellet raw material. We've got a whole lot of colours in, & more are on the way. If you don't see a colour you like, please let us know. If you're looking for R-PETg in common colours, please see our Kiwifil R-PETg Popular Colour Filaments.

Sale!

Kiwifil rPLA Pro Filament – Rainbow Colours

+gst

KiwiFil R-PLA Pro comes in beautiful colours - not the boring colours you thought 100% Recycled PLA had to be. It is Proudly Made in New Zealand from the same raw material as standard PLA pro, with the bonus of using post-industrial waste from the manufacturing of food packaging. So the plastic that would otherwise go to a landfill is turned into world class filament. Sustainability with Style - RPla works as well as any filament that is extruded from conventional pellet raw material. We've got a whole lot of colours in, & more are on the way. If you don't see a colour you like, please let us know. If you're looking for R-PLA Pro in common colours, please see our Kiwifil R-PLA Pro Standard Colour Filaments.

Sale!

rPLA NZ made sustainbly sourced 3d printing filament

Kiwifil rPLA Pro Filament – Standard Colours

+gst

KiwiFil R-PLA Pro is Proudly Made in New Zealand from the same raw material as standard PLA pro, with the bonus of using 100% post-industrial waste from the manufacturing of food packaging. So the plastic that would otherwise go to a landfill is turned into world class filament. Sustainability without compromise - RPla works as well as filament that is extruded from conventional pellet raw material. We've got a whole lot of colours in, & more are on the way. If you don't see a colour you like, please let us know. If you're looking for R-PLA Pro in rainbow, glittery & gradient colours, please see our Kiwifil R-PLA Pro Speciality Colour Filaments here.

Loctite IND 405 Clear Industrial 3d printing resin

Loctite IND 405 – Ultra Clear Tough Industrial 3D Printing Resin

$299.00 +gst

LOCTITE 3D IND405 is the clearest & most impact resistant among the tough 3D Printing resins available. A common problem with most tough resins is that they are quite brittle, & do not offer good elongation at break. But the IND 405 is a high-strength, high elongation engineering plastic with good impact resistance & very high optical clarity. It has also been weather tested with UV to perform well outdoors without yellowing. Its the only 3d printing resin printable on LCD resin 3d printers, that can 3d print automotive indicator lenses, among many other outdoor applications. LOCTITE 3D IND405 can be printed in various resin 3d printers and parts can be machined or polished for final clear finish.

Loctite IND 406 High temp industrial 3d resin

Loctite IND 406 Black – High Temperature Industrial 3D Printing Resin

$299.00 +gst

LOCTITE 3D IND406 is the toughest High Temperature 3D Printing Resin available. A common problem with most high temperature resins is that they are quite brittle. But the IND 406 BK is a high-strength, high elongation engineering plastic with good impact and high temperature resistance up to 107 C. It has also been weather tested with UV to perform well outdoors with minimal change to mechanical properties. On top of that, you get high chemical resistance & water immersion performance, making it suitable for a variety of deplyoments. Stiffness, toughness and thermal durability make this the ideal material for a wide variety of tools in the production floor. Thanks to excellent chemical resistance & immersion testing, IND 406 is perfect for final parts production in Automotive manufacturing. The product is ideal for fixtures, interior and machinery parts. LOCTITE 3D IND406 can be printed in various resin 3d printers and parts can be machined, tapped, or polished for final finish.

Magigoo HT 3D Printing Glue for High Temp PEI, PEEK, etc

$79.00 +gst

Magigoo HT adhesive is designed to provide bed adhesion with challenging materials like PEI Ultem, PEEK, PEKK, PPS, PSU, PPSU etc. It can be used with all kinds of bed surfaces, however we recommend PEI or Garolite. It can also be used with Carbon Fiber reinforced filaments & Glass Filled materials, like PPS-CF, PEI-CF & PEEK-CF etc. To 3D Print Nylon, we recommend Magigoo PA as a first choice, & if that doesn't suit well for your particular filament, then try this Magigoo HT. For common materials like PLA, ABS etc, we recommend buying the Magigoo original glue. Magigoo glue reduces warping in FDM 3D printers. Warping is caused by the differential cooling of a print during a 3D printing process made up of layers. For printing advanced materials reliably, apply a thin layer of Magigoo on your print bed before printing. This will ensure a successful print. If too much glue has been lacquered on, please wipe with a damp sponge & then reapply glue.

Magnetic Bed Level Sensor Probe for 3D Printers

$19.00 +gst

This is an inductive sensor for 3d printers like Wanhao i3 plus mk2, D6, & D9. It will suit most other 3d printers that use magnetic proximity sensors for bed levelling. Or for any other applications where a magnetic sensor is used for proximity, detection, limit switching etc.

Sale!

Matter & Form MAF Three 3D Scanner – Scan All Sizes Accurately

+gst

Matter And Form MAF 3 latest 3D Scanner launched

We are proud to present the Matter & Form THREEE 3D Scanner to New Zealand. This scanner is so revolutionary, that it has replaced every other 3d scanner we offer. Why is the MAF3 a ground breaking 3d scanner? Its Auto Focus variable lenses allow for it to precisely set capture distance, allowing this scanner to capture everything from a Coin to a Car with ease. No other single device in the 3d scanning market is able to do this. You can Control your Accuracy, Resolution & Working Distance based on your requirements. Works with any device that has a browser. No need to buy a laptop that costs more than your scanner. Connect it to a turntable if you want to. Or use it off a tripod to take stills from any location, all around the object. This is the next evolution of 3D scanning & the industry has been waiting a long time for something as simple as this.

Mayku Form HIPS High Impact Polystyrene Sheets 0.5mm 30 Pack

$49.00 +gst

Form sheets for FormBox Desktop Vacuum Former - 0.5mm thickness

Mayku Form Sheets provides 30x 0.5mm versatile, easy-to-use white sheets, which allow forming with high accuracy on your Mayku FormBox vacumm former. Great for product packaging, prototyping, and enhancing decorative craft projects. Has a non-stick type white laminated surface that makes it easier to work with a wide range of materials like Plaster of Paris, Silicone Putty, & many other forming pastes. Fully recyclable, partially made from recycled plastic waste.

Durable, Replicates fine detail & Easy to cut
White, Satin surface thats Ready to pain
MAKE YOUR IDEAS REAL: Use Form Sheets with the Makyu FormBox to create your very own desktop production line. Whether you’re crafting by hand or partnering with your 3D printer, you can create a factory finish without the factory.
FULLY REUSABLE: Use the same molds repeatedly, for minimum waste and maximum efficiency.
EASY REMOVAL: The slight flex and non-stick surface that the sheet provides ensures that your templates and casts can be removed with ease.
RECYCLABLE: These sheets are recyclable, making them an eco-friendly option. These are Partly made from recycled plastic waste as well.

In stock right here in Auckland & ready to ship today. Check out the Vacuum Former to see how you can make YOUR IDEAS COME TO LIFE.

3D Printing Resin Colouring Pigment Set New Zealand

Monocure Resin Colouring Pigment Dye Set CMYK – Create your resin colour

$29.00 +gst

MonoCure CMYK PIGMENT SET

Monocure 3D CMYK Pigment Set Is Intended For Use With 3D Resins to create your own custom colours to suit your individual needs! Just add droplets of colours into your resin to make your own unique resin colours. Use White Resin for more Opague colours, or Clear Resin to make more translucent colours - the choice is yours.

These pigment dispersions are designed to work with 3D Printing applications where UV light is used to cure the resin layer by layer.

We use a simple but highly effective approach to anchoring dispersant onto pigments to significantly increase print performance.

Our pigment dispersions do not affect performance across our resin systems. Increased stability is achieved by cross-linking the dispersants to create a robust polymer shell, entrapping each pigment particle.

Set contains 4x 30ml bottles - cyan, magenta, yellow, and black pigments - 1 of each colour to create your own wonderfully unique resin colours.