3D Printer Shop

Home » 3D Printer Shop
  • Sale!
    Wood gradient rainbow designer pla

    PLA Wood gradient rainbow filament

    Original price was: $45.00.Current price is: $39.99. +gst

    PLA Wood Gradient is a natural-toned filament designed to print wood-like creations with an organic, realistic finish.

    Perfect for cabins, furniture, props, and any nature-inspired builds. Rustic warmth straight onto your table-top.

    Ideal for 3D printing projects like statues, vases, decor pieces, D&D terrain, and architectural models that need a natural touch.

    Pair it with stone & metallic filaments to elevate your 3D prints to a whole new level.

  • Phrozen N FEP Film LCD Resin A4

    Phrozen PFA NFEP Film 290x210mm A4 10″ Mighty

    $40.00 +gst
    A4 Size NFEP Film for medium size SLA Resin 3D Printers NFEP film also called PFA Film is better than standard FEP film to reduce suction forces. It is basically a better quality of the non-stick surface so it reduces peel forces. So parts are less likely to stick to film or pop off from the build plate. This FEP Film is suitable for slightly bigger printers like Phrozen Sonic XL, Phrozen Mighty, Epax E10, Anycubic Mono, Elegoo Saturn etc Can also work with smaller DLP LCD 3D Printers, simply cut the sheet in half & you have 2 FEPs! This will work with Metal or Plastic vats. Very easy to use. Simply open the screws on your vat, remove the old FEP sheet, & put this sheet in place. Please see the video below to see how easily you can change the FEP on your Phrozen Sonic Mini Resin 3D Printers. You should change your FEP film when its cloudy, has excessive scratches, or you find the prints stick to it too easily rather than the bed. Depending on several factors, this is usually around 200 hrs of use. FEP is like a car tyre, you can have the best mechanics but without a good tyre, you're asking for trouble. We keep our prices on consumables cheap to help kiwis get the best results with 3d printers without prolonging the need to replace important components. Also check out the PlateBond Adhesion Promotor to help your base layers stick better to the bed of your resin 3d printer.
  • Generic Image Placeholder

    Creatbot D Extruder Head Feed Tube with Plugs

    $40.00 +gst
    The Teflon feed tube to connect the extruder to the head on Creatbot D series 3d printers like the Creatbot DX, DE etc. Includes the brass studs that the tube plugs into & locks into place. Screws on the head end & the extruder end. No assembly needed. Available for 3mm filament as well as 1.75mm filament based Creatbot D series machines. Please specify filament diameter, otherwise the default 3mm compatible tubes will be sent as they are more common. If your lugs break off, please consider buying this 1 piece ready tube.
  • Flashforge Creator 3 Stainless steel Nozzle 0.4mm

    FlashForge Creator 3 Nozzle 0.4mm Stainless

    $40.00 +gst
    This is a Genuine FlashForge brand nozzle for FlashForge Creator 3 & Creator 3 V2 3D Printers. These smart nozzles come with a one-piece heat brake built into them along, so just changing this one nozzle gets you a practically new 1 piece extrusion area. Simply unscrew the existing nozzle & screw the new one on, easy. Please remember to always heat your hot end before removing your nozzle.

  • Relay – Choose AC/DC

    $40.00 +gst
    These relays are used in many 3d printers including the Creatbot F430, D600 & PEEK300. Usually they are used for the Bed heater or the Chamber heater. Please select which relay you want from the list. The triger voltage is 3-32V DC. Please pick the correct type. Be sure before you install it. Relays blow instantly if you get the trigger voltage wrong, or connect the wrong end into the wrong point.
  • Cratbot D600 pro 2 & D1000 hot end temperature sensor

    Creatbot D600 pro2 D1000 Temp Sensor

    $40.00 +gst
    Loose contacts with the temp sensor can cause inaccurate readings, which compromises the accuracy of your plastic flow. With a new temp sensor, you ensure optimal temperature control for your Creatbot DX & DE machines. This means more accurate & stronger 3d prints without under-extrusion & layer delamination.
  • Creatbot hot end Cartridge heater

    Creatbot D600 pro 2 D1000 Cartridge Heater

    $40.00 +gst
    Suitable for Creatbot D600 Pro 2 & D1000 3d printers. These are genuine Creatbot supplied 24V 60W cartridge heaters which can handle up to 450C reliably. Creatbot high temp hot ends support up to 420C so please be mindful the heater you use. These have short wires. Not suited for older D600s, F430, F160, or PEEK edition 3d printers. Standard Tube Cartridge Heater that slots inside the hot block. Has a small connector to plug on the board so its really easy to install.
  • Sale!
    rPLA NZ made sustainbly sourced 3d printing filament

    Kiwifil rPLA Pro Filament – Standard Colours

    Original price was: $52.00.Current price is: $41.60. +gst
    KiwiFil R-PLA Pro is Proudly Made in New Zealand from the same raw material as standard PLA pro, with the bonus of using 100% post-industrial waste from the manufacturing of food packaging. So the plastic that would otherwise go to a landfill is turned into world class filament. Sustainability without compromise - RPla works as well as filament that is extruded from conventional pellet raw material. We've got a whole lot of colours in, & more are on the way. If you don't see a colour you like, please let us know. If you're looking for R-PLA Pro in rainbow, glittery & gradient colours, please see our Kiwifil R-PLA Pro Speciality Colour Filaments here.
  • Sale!
    RPETg common colours

    Kiwifil rPETg Filament – Popular Colours

    Original price was: $52.00.Current price is: $41.60. +gst
    rPETG filament is Proudly made in New Zealand by reusing offcuts & waste of the same high quality PETg material thats used in food packaging manufacturing. So the plastic that would otherwise go to waste is turned into world class filament! This is a great way to manufacture parts using a very common plastic, while significantly reducing the carbon footprint of your 3d printed items. Sustainability with Style - RPETg prints like any petg filament that is extruded from conventional pellet raw material. We've got a whole lot of colours in, & more are on the way. If you don't see a colour you like, please let us know. If you're looking for R-PETg in spectacular colours, please see our Kiwifil R-PETg Speciality Filaments.
  • Sale!
    recycled petg in pretty colours

    Kiwifil rPETg Recycled Filament – Specialty Colours

    Original price was: $53.00.Current price is: $41.90. +gst
    R-PETG in PRETTY colours - not the boring colours you thought 100% Recycled filament comes in. Proudly Made in New Zealand by reusing offcuts & waste of the same high quality PETg material thats used in food packaging manufacturing. So the plastic that would otherwise go to waste is turned into world class filament - now isnt that clever..? Sustainability with Style - RPETg works like any petg filament that is extruded from conventional pellet raw material. We've got a whole lot of colours in, & more are on the way. If you don't see a colour you like, please let us know. If you're looking for R-PETg in common colours, please see our Kiwifil R-PETg Standard Colour Filaments.
  • Sale!
    Speciality recycled pla filaments

    Kiwifil rPLA Pro Filament – Rainbow Colours

    Original price was: $55.00.Current price is: $44.00. +gst
    KiwiFil R-PLA Pro comes in beautiful colours - not the boring colours you thought 100% Recycled PLA had to be. It is Proudly Made in New Zealand from the same raw material as standard PLA pro, with the bonus of using post-industrial waste from the manufacturing of food packaging. So the plastic that would otherwise go to a landfill is turned into world class filament. Sustainability with Style - RPla works as well as any filament that is extruded from conventional pellet raw material. We've got a whole lot of colours in, & more are on the way. If you don't see a colour you like, please let us know. If you're looking for R-PLA Pro in common colours, please see our Kiwifil R-PLA Pro Standard Colour Filaments.

  • Esun PETg CF – Carbon Fiber PETg 3D Filament – Black 1kg

    $45.00 +gst

    Esun PETg CF Filament

    Made using PETG and High-Modulus Carbon Fiber, PETG-CF is a high strength, matted, easy to 3d print CF reinforced 3D printing filament. PETG CF is easier to print than PET CF thanks to better low & reduced warping.

    Carbon Fibre coupled with the higher temperature handling & stiffness of PETG presents an advantage over other PLA based carbon fibre filaments that soften at lower temperatures, since PLA will soften faster than Petg & is also a weaker material.

    Dark coloured PLA softens in direct sunlight in summer, for eg, inside a car. But PETg handles hotter temperatures better.

    This filament is ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, ease of printing & able to be in the sun.

    Petg is also easier to 3d print than Nylon in some 3d printers.

    This filament is an excellent alternative to carbon fiber Nylon filaments in case you need lower moisture absorption, & higher stiffness compared to a Nylon based polymer.

    1.75mm 1kg roll of PetG Carbon Fiber Filament