-
Genuine FlashForge nozzle for the FlashForge Guider 2S 3D Printer. It is common for nozzles to wear or block after a period of use, & need replacing. Simply unscrew the existing nozzle & screw the new one on, easy. Please remember to always heat your hot end before removing your nozzle.
-
Full Swappable Extruder Head for the new FlashForge Creator 4 3D Printer. 3 Extruder options available: HS Extruder = High Temp 360C Extruder including Carbon Fiber filled materials. HT Extruder = upto 320C temp for common plastics including PLA/ABS. F Extruder = Specialist flexible filament extruder for high flex TPU TPE & similar materials. Please specify which head you want on the order notes.
-
This motor is used in the Creatbot F430 3d printer. It is the X axi motor that connects on the linear rail to move the head left to right. This is the motor only, not the fan/heatsink. Please remember to put the heatsink & fan from your old motor onto the new motor.
-
This is a temperature sensor for the newer FlashForge Creator Pro 2 & Creator 3 Pro 3d printers. It is a threaded type that fits into the hot end block. This is not for older flashforge Creator series printers.
-
This is the USB reader board used on a Creatbot F430 & F160 3d printer. This is the Latest version board with an adapter to allow certain older printer models to also be able to use it.
-
This is the small PCB that goes behind the extruders of a Creatbot F430 head. The main ribbon cable connects to it from the motherboard underneath the machine. And other connectors such as the temp sensors, cartridge heaters, probe etc plug into this little board.
-
This is a Carbon Fibre reinforced spring steel sheet designed for the Creatbot F160 & F160 PEEK 3d printer Bed. It allows you to setup an easy removable build plate system by 3d printing on this plate, or attaching your chosen build surface onto this plate. Check out our matching Creatbot F160 Build Tak Bed Mat for a sleek & easy solution. This is a high wear resistant 3d printing surface that can provide good adhesion for PEEK & PEI or other advanced polymers, with appropriate surface glues. Ideal for those who 3d print with such materials extensively. You can print directly on Carbon Fibre plates with any material including PLA, but you must apply a little bit of Glue stick on this plate first. You can also buy our 200x200mm PEI sheet which are perfect to stick on this metal plate.
-
Genuine E10 resin tray molded using non corrosive plastic. This vat fits all EPAX E10 series 3D printers. Works with the original 8.9" screen E10 as well the new 10.1" E10 5K 3d printers. Each vat comes with a sheet of nFEP film already installed, ready to use. Just remove the old tray out & slide the new one in. Thats it, easy installation.
- Molded tank allows for cheap replacements and extras for switching out resin on the fly
- Fibreglass reinforced plastic sports increased durability and resistance to corrosion and resin.
- It is equipped with a rubber seal to ensure that the vat is water-tight to help avoid resin leaks.
- E10 Vat Max Volume 1500mL without build platform and 700mL with build platform
-
These relays are used in many 3d printers including the Creatbot F430, D600 & PEEK300. Usually they are used for the Bed heater or the Chamber heater. Please select which relay you want from the list. The triger voltage is 3-32V DC. Please pick the correct type. Be sure before you install it. Relays blow instantly if you get the trigger voltage wrong, or connect the wrong end into the wrong point.
-
Phrozen screen protector is made of durable and high-transparency material to protect your LCD screen from the risk of resin spilling & damaging your LCD screen. This works beautifully without affecting your prints. Just relevel your bed after you stick it on the lcd screen of your resin 3d printer & you are good to go.
-
Genuine 10" 8K Mono LCD Screen for Phrozen Mighty 8K Resin 3d printer. This is a high quality durable screen designed to give you the best long lasting performance you can expect. If your LCD screen gets damaged, or you see the exposure affected, it might be time to change your LCD. This is the masking LCD screen which projects the UV light layers for your 3d print. It is not the small touch screen panel used to control the printer.
-
Pulley for the belt rail system on Wanhao i3 & similar 3d printers. Will work on i3 plus as well new i3 plus mark 2. Is also compatible with many other 3d printers, but please check to be sure.
-
This is an inductive sensor for 3d printers like Wanhao i3 plus mk2, D6, & D9. It will suit most other 3d printers that use magnetic proximity sensors for bed levelling. Or for any other applications where a magnetic sensor is used for proximity, detection, limit switching etc.
-
This is the full hot end which gives you new extrusion components under the motor. It includes the heat brake, throat tube, hot block, & a 0.4mm nozzle. It comes fitted with a new cartridge heater & a thermocouple temp sensor as well.
-
These are the drivers used to drive the stepper motors on Creatbot 3d printers. They are used for the X Y Z axi motors as well as for the Extruder motors. Different drivers have been used for the X Y axi as well as for the Z & E1 / E2. Please choose the correct model number. If the model you have is not listed, please contact us & we will set it up for you.
-
The Phrozen Air Purifier is specially designed to reduce the odour from printing Resins & Filaments in 3d printers that do not have activated air filters. The compact and sleek design of the purifier makes it easy to integrate into any workspace without occupying too much space. They can sit snugly within most machines, & can reduce the VOCs exiting the units. Resins & Filaments used in the 3D printing process, sometimes emit strong smells, which can be a nuisance to both the printing environment and the overall printing experience. The purifier is designed to be user-friendly and low-maintenance. It has a convenient control panel that allows users to monitor the filter life and replace them when needed. By using the Phrozen Air Purifier, 3D printer users can significantly reduce the resin odor, creating a more pleasant and healthier environment for both themselves and others present in the area. This improved air quality not only enhances the overall printing experience but also ensures a safer and more enjoyable workspace. This little device helps alleviate one of the common issues faced by 3D printing enthusiasts.
Alex L2023-11-28I have dealt with the 3D Printer Store for several months now and have to say that the experience has been very positive. Zubbin is extremely knowledgeable in this field, enthusiastic, honest and responsive. Pre and Post Purchase customer support has been great. He will have your best interest in mind and will recommend the best product for your needs. My positive experience dealing with him professionally has led me to buy product from him for personal use. We are very lucky to have such a supplier providing these kinds of specialized 3D Printers, Filaments, accessories and services in New Zealand. The rare filaments can sometimes be difficult to source but he will do his best to find alternatives to get what's needed ASAP or even suggest proper alternatives. I am looking forward to future collaboration with this supplier.
Elias Bayless2023-10-18First choice for all my 3d printing needs, the team here really does a great job! Always get my filament here and it arrives really fast and always performs very well in my printer.
Lyle Adams2023-10-18I recently purchased a 3D printer from this business and also took their training. Zubbin's knowledge and assistance is top-notch. He provided valuable insights not only on 3D printing but also related topics. Highly recommended!!
Dylan Cooper2023-09-19Solid company to deal with. I have ordered filament multiple times from this company. I have also been advised on better filament options than what I ordered, which worked out really well. Will continue to shop here!
Maarten van den Heuvel2023-08-21Good prices, fast shipping, excellent communication and when there was a hiccup with my order it was sorted super fast and to my full satisfaction. Can recommend.
Phil Shimmin2023-08-16Great service from these guys. On my most recent order there was a stellar turnaround of only 24 hours between initial stock query and the filament being in my printer.
Dan King2022-09-29Shipping and packaging was excellent and best in market pricing. I had an issue with a misunderstanding about the particular properties of the resin I purchased but Zubbin responded quickly and helped me resolve the issue. Perfect customer service, they have gained a loyal customer.
Mike O2022-09-12These guys are awesome. I used to buy my filament from overseas for my projects and needed something in a hurry and went looking for something local. I'm so glad I did. Not only are the prices as good or better than what I was getting overseas and even more of a deal when considering the pricing I was paying for shipping their turn around each time has been next day. Great range of in stock filaments, good prices, super fast turn around and excellent customer service.
Dion Hitchens2022-08-09Kia ora, This is a fantastic business selling reliable machines at a great price point. What I am impressed with the most is that the owner is always willing to help if I have a problem his insight and knowledge he is so willing to share is always on point and allows me to solve the problem I am trying to resolve. I look forward to doing more business with them. thanks
Michael Williams2022-06-28Sent them an email explaining what I was trying to achieve and asked for their advice. They responded promptly and recommend a basic 3d printer which turned out absolutely fit for purpose. Ordered online and with good communication i had printer within days. Will definitely return when I upgrade. This printing stuff is very addictive.