Luvocom® 3F PEKK 50082 Filament (Polyether Ketone Ketone) Filament

Home » 3D Printer Shop » 3D Printing Filament » Ultra Performance 3D Filaments » PEKK » Luvocom® 3F PEKK 50082 Filament (Polyether Ketone Ketone) Filament
3d4makers Luvocom PEKK 3d printer Filament now in NZ & Australia

Luvocom® 3F PEKK 50082 Filament (Polyether Ketone Ketone) Filament

$299.00 +gst

Out of stock

Polyether Ketone Ketone (PEKK) is a semi-crystaline thermoplastic in the Polyaryletherketone family. It has higher heat resistance than PEEK, offers exceptional chemical resistance, & can withstand high mechanical stress. It is inherently flame retardant and has unique tribological properties unlike any other ultra performance polymer currently available for 3d printers.

PEKK has a higher Tg than PEEK. PEKK is also easier to print compared to PEEK. PEKK has now overtaken PEEK as the best FDM 3d printing material.

LUVOCOM® 3F PEKK 50082 Material Properties

  • Density 1.27 g/cm³
  • Tensile Strength 90 MPa
  • Elongation at maximum force 5%
  • Modulus of elasticity 3 GPa
  • Flexural strength 150 MPa
  • Flexural elongation at max. force 6%
  • Flexural modulus 2,5 GPa

This roll is made by 3d4makers to extremely high standards in Netherlands using Luvocom PEKK formulation.

This is 0.2 KG of natural PEKK 3D Printing Filament.

Out of stock

SKU: 98517 Categories: , , , Tags: ,

Description

PEKK Filament has a tuneable crystallization rate which allows FFF or FDM users to take advantage of both the extreme performance of PAEKs and easier processing of amorphous materials; PEKK Filament is easier to print than regular PEEK filament with a better layer adhesion, while offering similar strength and resistance properties; better dimensional stability.

LUVOCOM® 3F PEKK 50082 is engineered to outperform the standard PEKK materials available in the market. It comes with enhanced flow behaviour which improves the printability and layer adhesion. This unique modified neat PEKK provides dimensional stability and is printable in non-heated chambers, delivering semi-crystalline parts with no warp.

  • Specially optimized for industrial 3D printing
  • Isotropic shrinkage characteristics
  • Non flammable (UL94 V-0)
  • Continuous service temperature 255°C
  • Service temperature 300°C (during lifetime max. 200h)
  • Highly chemically-resistant
  • Low warpage

Print Settings 

  • Print Temperature: 360°C (340-380°C).
  • Bed Temperature: 110-140°C
  • Adhesion: Magigoo HT on Carbon fiber plate or a PEI Sheet
  • Print Speed: 20-50 mm/s
  • Drying Instruction: 4 hours, 120°C

Related products