-
This is a sample 3d print made using our High Temp Resin that has a HDT (Heat Defection Temperature) of 190C & Tg (Glass Transition Temperature) of 220C. Please send us your stl file first to ensure this will be suitable to make.
-
Head board for 3d printers like Wanhao i3 plus mk2, D6, D9, D9 mk2 etc. This is the little PCB that sits on top of the main head where you plug in the heater, temp sensors, etc.
-
Deli is an affordable versatile glue stick that works really well on all bed surfaces for all 3d printers. PLA, ABS, ASA, HIPS etc will benefit from glue particularly on glass beds. You will need glue when 3d printing with Nylon, Carbon Fibre, PolyPropylene, & other Engineering materials that don't like to stick to other surfaces. Applying glue greatly reduces warping from all materials. You can start with this cheapest glue stick, & then move to get more specialised glue sticks from our collection of bed prep adhesives here. Just apply a thin layer of this glue on a warm build surface, & print directly on it. Please take care that if printing directly on glass beds then some materials can crack the bed when taking it off after using glue. We recommend you buy a PEI sheet first rather than directly on glass or ceramic. This is a PVA based glue that easily wipes off with a damp cloth. Reapply only as needed. Less is more with Glue when used for 3d printing. 20g glue stick
-
With our 3D Printer Store Gift Card, we do things differently to others..
NO EXCLUSIONS - you can use them STOREWIDE including DISCOUNTED ON SALE products.
VALID 2 YEARS - that's right, this gift card is valid for 2 whole years.
Give your loved ones the gift of creativity & inspiration this holiday season. Just pick the amount, add it to cart, & check out. You will also be given the option to email the gift certificate directly to the receiver if you like. This is our online store credit. It is claimed online & a phyiscal card is not necessary. -
FlashForge Carbon Fibre PETg Filament
Made using PETG and High-Modulus Carbon Fiber, FlahForge PETG CF is a high strength, matted, easy to 3d print CF reinforced 3D printing filament. Carbon Fibre coupled with the higher temperature handling & stiffness of PETG presents an advantage over other PLA based carbon fibre filaments that soften at lower temperatures, since PLA will soften faster than Petg & is also weaker. This filament is ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing. Petg is also easier to 3d print than Nylon in some 3d printers. This filament is an excellent alternative to carbon fiber Nylon filaments in case you need lower moisture absorption, & higher stiffness compared to a Nylon based polymer. 1.75mm 1kg roll of PetG Carbon Fiber Filament Benefits of PETG Carbon include: PETG Carbon Filament Material Properties- Density 1.3 g/cm³
- Charpy impact Strength 3.91 KJ/m2
- Tensile Strength 51 MPa
- Glass temperature tg 75°
- Superior Chemical Resistance vs. ABS
- Amorphous: Â Low and near isotropic, for minimal shrinkage
- Low moisture absorption: Â 3X lower vs. ABS
- Low odor emitted during printing
- Wide processing range:  220 - 260°C
-
Genuine FlashForge nozzle for the FlashForge Guider 2S 3D Printer. It is common for nozzles to wear or block after a period of use, & need replacing. Simply unscrew the existing nozzle & screw the new one on, easy. Please remember to always heat your hot end before removing your nozzle.
-
Suitable for FlashForge 3D Printers including Adventurer , Finder, Inventor, Guider & similar 3d printers.
-
This is a Genuine FlashForge brand nozzle for FlashForge Creator Pro 2 IDEX 3D Printers. It is common for nozzles to wear or block after a period of use, & need replacing. Simply unscrew the existing nozzle & screw the new one on, easy. Please remember to always heat your hot end before removing your nozzle.
-
This is a temperature sensor for the newer FlashForge Creator Pro 2 & Creator 3 Pro 3d printers. It is a threaded type that fits into the hot end block. This is not for older flashforge Creator series printers.
-
This is the latest flexible build plate that fits on the new magnetic beds of FlashForge Creator 4 3D Printers. It now has a PEI reinforced build surface that provides excellent adhesion to most common materials including flexible TPU materials. It also gives a very good bottom surface finish. It is superior to the older Black plates that FlashForge used to supply. We highly recommend PEI sheets as the best surface to print on. For Nylon based materials, we still recommend you put a thin layer of the glue stick on it.
-
Full Swappable Extruder Head for the new FlashForge Creator 4 3D Printer. 3 Extruder options available: HS Extruder = High Temp 360C Extruder including Carbon Fiber filled materials. HT Extruder = upto 320C temp for common plastics including PLA/ABS. F Extruder = Specialist flexible filament extruder for high flex TPU TPE & similar materials. Please specify which head you want on the order notes.
-
This is the mat that sticks onto the spring steel build plate, which adheres on the magnetic 3D Printer bed of 3d printers like FlashForge Creator 3, 3 Pro & 3 Pro v2 . It can also be used on any 3d printer that has a 300x250mm build volume & you want a good quality surface mat. This item is only the top build tak style mat, that you can 3d print on. The photo is to show you how the mat is to be used in relation to a Creator series 3d printer. This is a sticker, it has glue on 1 side, just peel it & stick it onto any surface. It is a Polycarbonate re-inforced build surface that provides excellent adhesion to most common materials. However, for Nylon based materials, it will be best to put a thin layer of the glue stick on it. Some Flashforge mats are blue, & some are black - they are exactly the same mat, flashforge just changed colours between the machine releases.
-
This is the full hot end which gives you new extrusion components under the motor. It includes the heat brake, throat tube, hot block, & a 0.4mm nozzle. It comes fitted with a new cartridge heater & a thermocouple temp sensor as well.
-
This is the flexible metal plate that fits on the new magnetic beds of FlashForge Creator 3 3D Printers. It has a Polycarbonate re-inforced build surface that provides excellent adhesion to most common materials. However, for Nylon based materials, we still recommend you put a thin layer of the glue stick on it.
-
This is the small PCB that goes behind the extruders of a Creatbot F430 head. The main ribbon cable connects to it from the motherboard underneath the machine. And other connectors such as the temp sensors, cartridge heaters, probe etc plug into this little board.
Trustindex verifies that the original source of the review is Google.
Alex L2023-11-28I have dealt with the 3D Printer Store for several months now and have to say that the experience has been very positive. Zubbin is extremely knowledgeable in this field, enthusiastic, honest and responsive. Pre and Post Purchase customer support has been great. He will have your best interest in mind and will recommend the best product for your needs. My positive experience dealing with him professionally has led me to buy product from him for personal use. We are very lucky to have such a supplier providing these kinds of specialized 3D Printers, Filaments, accessories and services in New Zealand. The rare filaments can sometimes be difficult to source but he will do his best to find alternatives to get what's needed ASAP or even suggest proper alternatives. I am looking forward to future collaboration with this supplier.Trustindex verifies that the original source of the review is Google.Elias Bayless2023-10-18First choice for all my 3d printing needs, the team here really does a great job! Always get my filament here and it arrives really fast and always performs very well in my printer.Trustindex verifies that the original source of the review is Google.Lyle Adams2023-10-18I recently purchased a 3D printer from this business and also took their training. Zubbin's knowledge and assistance is top-notch. He provided valuable insights not only on 3D printing but also related topics. Highly recommended!!Trustindex verifies that the original source of the review is Google.Dylan Cooper2023-09-19Solid company to deal with. I have ordered filament multiple times from this company. I have also been advised on better filament options than what I ordered, which worked out really well. Will continue to shop here!Trustindex verifies that the original source of the review is Google.Maarten van den Heuvel2023-08-21Good prices, fast shipping, excellent communication and when there was a hiccup with my order it was sorted super fast and to my full satisfaction. Can recommend.Trustindex verifies that the original source of the review is Google.Phil Shimmin2023-08-16Great service from these guys. On my most recent order there was a stellar turnaround of only 24 hours between initial stock query and the filament being in my printer.Trustindex verifies that the original source of the review is Google.Dan King2022-09-29Shipping and packaging was excellent and best in market pricing. I had an issue with a misunderstanding about the particular properties of the resin I purchased but Zubbin responded quickly and helped me resolve the issue. Perfect customer service, they have gained a loyal customer.Trustindex verifies that the original source of the review is Google.Mike O2022-09-12These guys are awesome. I used to buy my filament from overseas for my projects and needed something in a hurry and went looking for something local. I'm so glad I did. Not only are the prices as good or better than what I was getting overseas and even more of a deal when considering the pricing I was paying for shipping their turn around each time has been next day. Great range of in stock filaments, good prices, super fast turn around and excellent customer service.Trustindex verifies that the original source of the review is Google.Dion Hitchens2022-08-09Kia ora, This is a fantastic business selling reliable machines at a great price point. What I am impressed with the most is that the owner is always willing to help if I have a problem his insight and knowledge he is so willing to share is always on point and allows me to solve the problem I am trying to resolve. I look forward to doing more business with them. thanksTrustindex verifies that the original source of the review is Google.Michael Williams2022-06-28Sent them an email explaining what I was trying to achieve and asked for their advice. They responded promptly and recommend a basic 3d printer which turned out absolutely fit for purpose. Ordered online and with good communication i had printer within days. Will definitely return when I upgrade. This printing stuff is very addictive.
