-
Genuine Creatbot Throat Tube which connects the hot block into the extruder mechanism. This is the teflon tube lined version which makes it easy to print PLA, PETg etc thanks to the teflon liner. But it will only operate up to 260C, please do not print hotter than that else you will damage the teflon liner. The heat sink & the nozzle is attached at the bottom of this piece. If you have replaced nozzles & still find there are extrusion issues, please consider changing this part. This tube is considered part of the heat break mechanisk, & has a partial teflon coating on the top to aim smooth extrusion. So it is recommend you change this tube as needed for the best uniformity in extrusion as well as reduction of jams or blockages particular in longer 3d prints. Will suit all Creatbot D series 3D Printers we sell including F160, F160 PEEK, F430, F430 PEEK, D600 PRO (not the older D600)
-
This is a temperature sensing Thermocouple for Creatbot F series 3d printers. They will fit all Creatbot F430 & F160 3d printers.
-
This is a 24V DC radial fan used as the part cooling fan on Creatbot F430 & F160 3d printers. It is mounted to the side of the extruder 1 (between 1 & 2 if its a dual extruder machine) & plugs into the top extruder board above the head.
-
This is the USB reader board used on a Creatbot F430 & F160 3d printer. This is the Latest version board with an adapter to allow certain older printer models to also be able to use it.
-
Buildtak style Bed Mat designed for the Creatbot F160 & F160 PEEK 3d printer. This is a simple, easy to apply stick on mat that sticks on the bed of the 3d printer. It can even stick on an existing buildtak. Just peel the bottom & use like a sticker. Great adhesion for common materials like PLA, ABS, PETg, TPU. For a high wearing setup you can buy our matching Carbon Fibre Metal Plate to setup a removable bed system.
-
This is a Carbon Fibre reinforced spring steel sheet designed for the Creatbot F160 & F160 PEEK 3d printer Bed. It allows you to setup an easy removable build plate system by 3d printing on this plate, or attaching your chosen build surface onto this plate. Check out our matching Creatbot F160 Build Tak Bed Mat for a sleek & easy solution. This is a high wear resistant 3d printing surface that can provide good adhesion for PEEK & PEI or other advanced polymers, with appropriate surface glues. Ideal for those who 3d print with such materials extensively. You can print directly on Carbon Fibre plates with any material including PLA, but you must apply a little bit of Glue stick on this plate first. You can also buy our 200x200mm PEI sheet which are perfect to stick on this metal plate.
-
Genuine Creatbot high temp 420 degree rated hot end for F series 1.75mm 3d printers. Will suit all Creatbot F 3D Printers we sell including Creatbot F160, F160 PEEK, F430 & F430 PEEK edition 3d printers. This hot end will work for all materials upto 420C. This hot end doesnt have a teflon liner so it can be used with abrasive materials like carbon fibre. It will also work for PLA & other common materials. However, for beginners, we sometimes recommend printing those sorts of entry level materials with the standard temp hot end which has a teflon liner, which aids the smoother flow of PLA. So its a little more forgiving for times when your settings may not be quite perfect. However this teflon can be worn off by abrasive materials like Carbon Fiber, so for such materials we recommend printing with the high temp hot end which doesnt have that liner. If you also need a new temperature sensor thermister or thermocouple, or a new cartridge heater, please buy them separately.
-
Genuine Creatbot standard 260 degree rated hot end for F series 1.75mm 3d printers. Will suit all Creatbot F 3D Printers we sell including Creatbot F160, F160 PEEK, F430 & F430 PEEK edition 3d printers. This hot end is only for materials upto 260C. To print hotter, please use buy the High Temp Extruder hot end. The advantage of the standard hot end is that it has a teflon liner inside which aids smooth flow of materials like PLA. However this teflon can be worn off by abrasive materials like Carbon Fiber, so for such materials we recommend printing with the high temp hot end which doesnt have that liner. If you also need a new temperature sensor thermister or thermocouple, or a new cartridge heater, please buy them separately.
-
This motor is used in the Creatbot F430 3d printer. It is the X axi motor that connects on the linear rail to move the head left to right. This is the motor only, not the fan/heatsink. Please remember to put the heatsink & fan from your old motor onto the new motor.
-
Power Interruption Circuit board for Creatbot desktop series D & F series 3d printers including DM , DX / DX Plus & DE / DE Plus 3D, F160 / F160 PEEK & F430 PEEK 3D Printer Printers. For D600 PRO series, PEEK 300 & F1000 series, please contact us for the appropriate part. This circuit board detects if there is a power failure while your Creatbot 3d printer is printing. Then when power resumes & the printer is started, the option to resume to resume the existing print is offered. This circuit is not critical, & the printer can still continue to be used with the board's white wire unplugged. Locations where there are excessive power outages seem to cause this board to blow out more frequently than other places. This is mainly because of spikes & voltage fluctuations in such locations. If you experience the need to frequently replace these, we recommend connecting your printer through a spike protector.
-
These are the drivers used to drive the stepper motors on Creatbot 3d printers. They are used for the X Y Z axi motors as well as for the Extruder motors. Different drivers have been used for the X Y axi as well as for the Z & E1 / E2. Please choose the correct model number. If the model you have is not listed, please contact us & we will set it up for you.
-
This is an upgraded, full metal build platform for EPAX E10 3D printers. It is compatible with all version of the E10 printer including the new E10 5K. The unique top bracket has been specially designed to fit E10 printers for optimum performance. It is a fully angled bed to allow the resin to flow down smoothly. Using this build platform will minimize resin accumulation on the top of the plate, allowing it to more readily drip back into the vat during printing. This makes clean-up and print removal faster, easier, and less messy overall so that you can spend more time printing. If you print a lot, or print very fast, or print larger parts, this all-metal build plate is the perfect choice.
Alex L2023-11-28I have dealt with the 3D Printer Store for several months now and have to say that the experience has been very positive. Zubbin is extremely knowledgeable in this field, enthusiastic, honest and responsive. Pre and Post Purchase customer support has been great. He will have your best interest in mind and will recommend the best product for your needs. My positive experience dealing with him professionally has led me to buy product from him for personal use. We are very lucky to have such a supplier providing these kinds of specialized 3D Printers, Filaments, accessories and services in New Zealand. The rare filaments can sometimes be difficult to source but he will do his best to find alternatives to get what's needed ASAP or even suggest proper alternatives. I am looking forward to future collaboration with this supplier.
Elias Bayless2023-10-18First choice for all my 3d printing needs, the team here really does a great job! Always get my filament here and it arrives really fast and always performs very well in my printer.
Lyle Adams2023-10-18I recently purchased a 3D printer from this business and also took their training. Zubbin's knowledge and assistance is top-notch. He provided valuable insights not only on 3D printing but also related topics. Highly recommended!!
Dylan Cooper2023-09-19Solid company to deal with. I have ordered filament multiple times from this company. I have also been advised on better filament options than what I ordered, which worked out really well. Will continue to shop here!
Maarten van den Heuvel2023-08-21Good prices, fast shipping, excellent communication and when there was a hiccup with my order it was sorted super fast and to my full satisfaction. Can recommend.
Phil Shimmin2023-08-16Great service from these guys. On my most recent order there was a stellar turnaround of only 24 hours between initial stock query and the filament being in my printer.
Dan King2022-09-29Shipping and packaging was excellent and best in market pricing. I had an issue with a misunderstanding about the particular properties of the resin I purchased but Zubbin responded quickly and helped me resolve the issue. Perfect customer service, they have gained a loyal customer.
Mike O2022-09-12These guys are awesome. I used to buy my filament from overseas for my projects and needed something in a hurry and went looking for something local. I'm so glad I did. Not only are the prices as good or better than what I was getting overseas and even more of a deal when considering the pricing I was paying for shipping their turn around each time has been next day. Great range of in stock filaments, good prices, super fast turn around and excellent customer service.
Dion Hitchens2022-08-09Kia ora, This is a fantastic business selling reliable machines at a great price point. What I am impressed with the most is that the owner is always willing to help if I have a problem his insight and knowledge he is so willing to share is always on point and allows me to solve the problem I am trying to resolve. I look forward to doing more business with them. thanks
Michael Williams2022-06-28Sent them an email explaining what I was trying to achieve and asked for their advice. They responded promptly and recommend a basic 3d printer which turned out absolutely fit for purpose. Ordered online and with good communication i had printer within days. Will definitely return when I upgrade. This printing stuff is very addictive.