3D Printer Shop

Home » 3D Printer Shop

NZ’s Biggest range of everything 3D Printing

We’ve got new items coming in, & specials running on selected products frequently.

Check out all the new Resins we stock – Monocure Australia, Phrozen high speed 3d printing resins all at superb Prices too!
The worlds strongest Nylon HT Filaments now available. There’s also advanced PEI materials on offer.
To explore everything we have on special, please click here or on SALE link in the menu.

t&cs apply.

  • Vacuum Former

    Vacuum Former (2)

  • 3D Print Service

    3D Print Service (5)

  • 3d printer repair service NZ

    3d printer repair service NZ (3)

  • Brands

    Brands (141)

  • 3D Printing Resin

    3D Printing Resin (32)

  • 3D Printers

    3D Printers (26)

  • 3D Printer Parts & Accessories

    3D Printer Parts & Accessories (73)

  • 3D Printing Bundles

    3D Printing Bundles (5)

  • 3D Printing Filament

    3D Printing Filament (47)

  • 3D Scanners

    3D Scanners (1)

  • Generic Image Placeholder
    View Cart
    Add to cart / Details

    3D Printer Repair at our site

    $120.00 +gst
    Book a service or repair for your 3d printer to be done at our office. Please drop off or ship the machine to us. This can include repair or standard maintenance related issues. This booking includes up to 1 hour of our time in repairing or servicing the machine. Please read our Terms of Repair here: https://3dprintingservices.co.nz/3d-printer-repair-service/ Pay particular attention to the points in Bold. By purchasing the repair service, you agree to the terms in full. If your machine can't be fixed, or parts are not available for example, then we will discuss those options with you. But kindly note you will still have to pay the first hour fee as our minimum assessment charge regardless of whether the machine can be repaired or not. If the 3d printer can't be brought over, we also offer a call out service to your site, mainly in the Auckland region. We mainly offer this service to the Auckland region, but can discuss coming over anywhere in New Zealand Please have a read here. Please read our 3D printer repair page to fully understand our charges & processes. Proceeding with a booking indicates you accept our Terms & Conditions. Repair starts only after payment clears. We have the right to refuse to repair & refund the cost for any reason whatsoever.
  • Sale!
    kids low temp safe 3d pen
    View Cart
    Add to cart / Details

    3D Printing Pen – Low Temperature – Kid Safe

    Original price was: $59.00.Current price is: $45.00. +gst
    Kid friendly 3D Printing Pen This 3D Printing Pen is specially made for children's hands and works with filaments at a lower temperature than regular 3D pens. It allows for children to explore their creative side safely. The pen works with special filaments that work at just 50C (the same as standard hot water tap). It comes with template sheets, so kids can trace on them & then fold onto a 3d object. Makes it really easy to start making 3d models without having to fully visualise each side. A bit like a Lego instruction booklet you can follow, before you make your own. Suitable for PCL Filament which is low temperature. This pen is not for higher temperature filaments such as PLA etc. For PLA or similar, please buy our standard version 3d pen.
  • Sale!
    3d printing pen pla abs
    View Cart
    Add to cart / Details

    3D Printing Pen – PLA ABS – Make, Repair or Highlight

    Original price was: $69.00.Current price is: $59.00. +gst
    This 3D Printing Pen is a versatile tool designed for 3D printing enthusiasts. Compatible with both PLA and ABS filaments, it allows for the creation of detailed artworks and functional prototypes with precision. It is also used to join prints, highlight them with colours, or repair any blemishes. Featuring advanced heating technology, this pen ensures smooth filament flow and strong adhesion, making it ideal for a wide range of creative projects. Whether you're sketching intricate designs or building complex structures, it offers a seamless and immersive experience, perfect for anyone passionate about bringing ideas to life in three dimensions.
  • 3D Printer Training NZ
    View Cart
    Add to cart / Details

    3D Printing Training 1 on 1 up to 2 hrs

    $150.00 +gst
    Our 3D Printer training can be catered to a wide range of 3d printers. In our intro course, we cover the basics needed to start 3d printing with popular software & machines. If you would like to buy a specific 3d printer, we can setup training for that model. We offer free 3d training with many of our professional products. Please click here to see our 3d printing course page for full details on our 3d printer training.  
  • View Cart
    Add to cart / Details

    3D4makers Natural white C8 Filament – 750g

    $64.00 +gst

    3D4Makers C8 3D Printing Filament 1.75mm 750g

    Facilan™ C8 is a type of filament specifically designed for 3D printing. It is known for its excellent printability and high strength properties compared to traditional PLA (Polylactic Acid) filament. One notable advantage of Facilan™ C8 is its ability to print without visible layers. This means that the printed object will have a smooth and seamless appearance, devoid of any visible lines or layers that are typically seen with other filament types. This makes Facilan™ C8 ideal for printing objects that require a high level of aesthetic finish. In addition to its superior surface finish, Facilan™ C8 also possesses enhanced strength properties compared to PLA. The filament has good dimensional stability, which means that the printed objects are less prone to warping or shrinking during the printing process. This allows for greater structural integrity and accuracy in the printed parts.
  • View Cart
    Add to cart / Details

    3D4makers Natural white Ortho Filament – 750g

    $150.00 +gst

    3D4Makers Ortho 3D Printing Filament 1.75mm 750g

    Facilan™ Ortho Filament is a 3D printing material specifically designed for orthopedic applications. It is a durable and flexible filament that offers exceptional mechanical properties, making it ideal for creating customized splints, braces, and other orthopedic devices. One of its unique features is its excellent adhesion to textiles, allowing easy combination and bonding with textile inserts or other shoe components. Additionally, the low melting point of Facilan™ Ortho enables it to be easily reshaped with warm water after 3D printing. Made from a unique blend of biocompatible polymers, this filament ensures patient comfort and excellent skin contact. Facilan™ Ortho Filament provides healthcare professionals with the ability to tailor orthopedic devices to individual patient needs, facilitating faster healing and recovery. With its high printability and compatibility with most desktop 3D printers, this innovative material is revolutionizing the orthopedic industry. Facilan™ Ortho is a versatile and high-quality polyester, known for its clean white appearance. It exhibits exceptional mechanical properties and has a density of about 1.2kg/cm3. With a melting point around 60°C, it is a safe and easy-to-print thermoplastic. The flexibility and toughness of Facilan™ Ortho, attributed to its glass transition temperature of -60°C, make it highly durable. Moreover, it is a biodegradable plastic, meeting compostability standards according to EN13432.
  • filament, pla, dental, 3d printing, 1.75mm
    View Cart
    Add to cart / Details

    3D4makers Natural white PCL 100 Filament – 750g

    $200.00 +gst

    3D4Makers PCL 100 3D Printing Filament 1.75mm 750g

    Facilan™ PCL 100 is a highly functional filament made from polycaprolactone, perfect for advanced medical applications. It can be reshaped in water at 55 °C after 3D printing due to its low melting point. This material is widely used in the development of artificial tracheas, smart materials, tissue engineering scaffolds, bioabsorbable implants, and more. Renowned universities and research centers worldwide trust Facilan™ PCL 100 for cutting-edge bioprinting and personalized medical research. With its flexibility and toughness, this filament has a glass transition temperature of -60 °C and a print temperature of around 120 °C. Its semi-crystalline aliphatic biodegradable polyester composition gives it a distinctive white appearance. Complying with European regulations, the filament produced by 3D4Makers is safe for use with food contact. Additionally, it offers excellent adhesion between layers, enhancing impact resistance, strength, durability, and print quality.
  • Placeholder
    View Cart
    Add to cart / Details

    Buy 3D Print Service NZ

    $10.00 +gst
    Dear 3D print service customers, After you receive the confirmed 3D Print cost from us, please use this to place an order equal to the cost we agreed on. For eg, if the cost is $50, please select quantity of 5, so the total will be $50. We realise this is not an ideal system & are working to make it better. Thank you for your co-operation until then.
  • Jewellery Castable 3D Printing Resin New Zealand
    View Cart
    Add to cart / Details

    Castable Wax like 3D Printing Resin for Jewellery

    $190.00 +gst

    Phrozen Violet Castable Jewelry 3D Printing Resin

    We're happy to introduce the new Wax like Jewelry casting resin by Phrozen. Phrozen is revolutionising SLA 3D Printing resins by offering cutting edge formulations that provide better results than ever before at an amazing price point. Specially designed for jewellery casting, Phrozen’s Wax-like Castable Resins burn cleanly to provide reliable casting for all types of models, especially jewelry and any high precision dental parts. This is a violet resin, & is superior to most of the cheaper green dental casting resins you will find. These Violet resins can be used in dentristry as well, they are will offer finer details to most green products. Very similar casting properties to the Wax resin models used by Jewellers, & works with common burnout cycles. Please see the Burnout schedule image supplied by Phrozen that you can send to your casting company, or follow for casting yourself. We recommend cleaning these wax print parts with our special resin cleaning liquid inside an ultrasonic cleaner, after which you should cure them in a heated curer like our FlashForge FC1 cure box. This will provide low-shrinkage, high-precision models that will cast ash free with far less surface aberration. It will also have low water absorption during the printing process, giving you more consistent results than other castable resins on the market. Designed to be sent to your foundry for casting into any metal including gold, silver, platinum etc We recommend DLP technology to work with wax based resins, though common LCD printers will work fine as well. These resins are compatible with most mSLA LCD DLP style 3D Printers including our FlashFroge Hunter DLP, Phrozen Mega 8k, Sonic XL, & Transform 3D Printers. Can also be used with other 3d printer brands that use the 360-420nm UV spectrum resins like Anycubic Photon, Elegoo Mars, Epax, Wanhao, Creality LDR etc. 500ml can of violet resin 3D Printer Store has the largest range of 3D printing filaments & resins in stock right here in Auckland with economical shipping New Zealand wide.
  • Laser Mark PLA 3D Printing Filament NZ
    View Cart
    Add to cart / Details

    ColorFabb Laser Engraver Marking PLA filament 750g 1.75mm

    $90.00 +gst
    3D Print your part with this PLA & then Etch / Engrave with your Laser Engraver This unique material is optimized to be used with laser engravers within a 980-1064 nm wavelength. The material has been tested successfully with a Nd:YAG- and  fiberlasers. Laser marking has various advantageous over conventional marking technologies: Bright White Colour - Markings are permanent, waterproof, wear and heat resistant, lightfast and resistant to chemicals. - Flexibility in marking design. - No pre or post-treatment required. Laser marking PLA will not work with CO2 lasers. Please welcome ColorFabb's unique Laser marking Filament all the way from Netherlands & ready to ship right from Auckland.
  • Carbon Fiber Steel Sheet F430
    View Cart
    Add to cart / Details

    Creatbot 450x300mm Carbon Fiber Steel Bed Sheet

    $175.00 +gst
    Carbon Fibre reinforced Steel board Actual board size is 490mm x 305mm Designed to fit our Creatbot F430 PEEK 3d printer but can be used in any machine of similar size. The advantage is that this surface offers very high abrassion resistance. So when you 3d print with high temp materials, the surface can last longer. The other advantage of these boards is that they can be used as removable build plates. We recommend sticking a PEI sheet on this if you want to use them in that way, as PEI is a more versatile surface & not just one for 3d printing PEEK. Please see our 400x300mm PEI sheets here.
  • Generic Image Placeholder
    View Cart
    Add to cart / Details

    Creatbot aluminum Door handles

    $10.00 +gst
    Genuine Creatbot door handles. These are the slim thin silver coloured aluminum door handles on newer Creatbot 3d printers with hinged doors. They are the smaller size (approx 80mm long), which are used for DX, DE, F160. They are also used on the rear chamber doors of the F430. These are attached to the Acrylic doors on the D series, & corresponding door frames on F series machines.
  • Z Touch Probe NZ
    View Cart
    Add to cart / Details

    Creatbot BL Touch Probe Z axi

    $79.00 +gst
    This is the Touch Sensor used on many 3d printers like our Creatbot F430 & new D600 for the Z axi homing & auto level. If the probe tip bends or breaks, you can easily replace the probe. After many months of High Temperature printing, it is common for the probe's internal magnetism to get demagnetised due to the heat in the chamber. This can cause it to stop clicking on & off. Please replace the probe as needed.
  • Generic Image Placeholder
    View Cart
    Add to cart / Details

    Creatbot D Extruder Head Feed Tube with Plugs

    $40.00 +gst
    The Teflon feed tube to connect the extruder to the head on Creatbot D series 3d printers like the Creatbot DX, DE etc. Includes the brass studs that the tube plugs into & locks into place. Screws on the head end & the extruder end. No assembly needed. Available for 3mm filament as well as 1.75mm filament based Creatbot D series machines. Please specify filament diameter, otherwise the default 3mm compatible tubes will be sent as they are more common. If your lugs break off, please consider buying this 1 piece ready tube.
  • Cartridge Heater Long Wire for 3D Printer NZ
    View Cart
    Add to cart / Details

    Creatbot D Printers Head Cartridge Heater

    $20.00 +gst
    Standard Tube Cartridge Heater that slots inside the hot block. Has long wire leads. Suitable for all Creatbot D series 3d printers including DX , DX Plus, DE , DE Plus for all single, dual or triple head models.
  • Creatbot DX DE series 3D Printer nozzle
    View Cart
    Add to cart / Details

    Creatbot D series 3D Printer Nozzle

    $30.00 +gst
    Genuine Creatbot second generation nozzles. Will suit all Creatbot D series 3D Printers we sell: DM, DX, DE & Plus versions We stock a wide range of nozzle diameters: 0.4, 0.6, 0.8, 1.0 mm  
  • Generic Image Placeholder
    View Cart
    Add to cart / Details

    Creatbot D series 3D Printer Thermocouple Temperature Sensor

    $25.00 +gst
    This is a temperature sensing Thermocouple for Creatbot D series 3d printers. They will fit all Creatbot DX & DE machines bought since 2015.  
  • Creatbot D series 3d printer Throat Tube Heat Brake part new zealand
    View Cart
    Add to cart / Details

    Creatbot D series 3D Printer Throat Tube Heat Brake

    $20.00 +gst
    Genuine Creatbot Throat Tube which connects onto the heat sink on top & the nozzle goes at the bottom. If you have replaced nozzles & still find there are extrusion issues, please consider changing this part. This tube is considered part of the heat break mechanisk, & has a partial teflon coating on the top to aim smooth extrusion. So it is recommend you change this tube as needed for the best uniformity in extrusion as well as reduction of jams or blockages particular in longer 3d prints. Will suit all Creatbot D series 3D Printers we sell including DM, DX, DE, the Plus versions, & the older D600 3mm machines  
  • Creatbot D1000 commercial 3d printer 1 metre
    View Cart
    Add to cart / Details

    CreatBot D1000 Commercial 3D Printer (1000x1000x1000mm)

    $57,999.00 +gst
    Big Parts - High Accuracy - Production Capability -  In All Common Filaments The Creatbot D1000 is our new top of the line Commercial grade FDM 3D printer, now updated with Servo Controlled Stepper motors & closed loop feedback electronics, giving it the most precise head positioning capability of any large scale 3D Printer on the market. Large 1000mm x 1000mm x 1000mm active heated build volume makes it possible to print large parts one piece with ease. Suited to producing large yet highly accurate 3d models, the D1000 has every professional grade feature you would expect. Contact us today to see how our leading edge Creatbot D1000 could give your business & an edge in product development. Please see full specification details below. Free training is offered with our Creatbot D1000. We will spend several hours with you to discuss any product specific requirements & help you get the best possible outcomes from these machines. We also offer free implementation assistance at your site, so you can rely on a team right here in New Zealand. We are New Zealand's PREMIUM Creatbot 3D Printer Partner. We are the only one in NZ to offer FREE TRAINING with all these advanced Creatbot 3D Printers so that you fully supported after buying the 3D Printer & not left alone after the printer is delivered. There is no extra charge for this training service. This is the committment we have put into the New Zealand 3D Printing Market - We want you to succeed with 3D Printing, & in your success is our success. We aim to have the BEST PRICE & BEST SERVICE for Everything 3D Printing  in NZ. On top of our Free Training, we still Aim to be UNBEATEN on Price. If you find the same product & a comparable service level anywhere in New Zealand, please let us know as we will usually be able to beat the competition.
  • Creatbot D600 Pro 2 3d printer New Zealand Australia
    View Cart
    Add to cart / Details

    Creatbot D600 PRO 2 3D Printer with Servo Motor System

    $23,900.00 +gst
    Big Parts, High Accuracy, & Reliability - In ALL Filament Materials currently available. The Creatbot D600 Pro 2 is the latest version of the successful D600 commercial grade FDM 3D printer. It features Servo Controlled motors & closed loop feedback electronics, giving it the most precise head calibration of any similar sized large scale 3D Printer on the market. It has become common to see low cost large size 3d printers on the market. So why would you buy this one? Just doubling the size of every single part & giving you a large bed, doesn't lead to a successful print. With cheaper printers you will see them advertise a size like 500x500mm, but when you actually try to print a part that size, your builds will consistently fail. Multi-day prints will be composed of layer shifts in the XY direction, even a 0.1mm XY shift will land your part in the rubbish bin. This is why real commercial grade 3d printers are designed to be able to produce what the spec sheet actually has on it. And that is the reliability you need, so that you dont come back to a 3 day print only to throw it in the bin. Large 600mm x 600mm x 600mm actively convection heated build volume makes it possible to print large parts one piece with ease. And the servo control system doesn't cause stepper drivers to overheat, which is all too common in kit style large 3d printers. Suited to producing large yet highly accurate 3d models, the D600 has every professional grade feature you would expect. Contact us today to see how our leading edge Creatbot D600 2 could give you the edge in product development & manufacturing. Please see full specification details below. Free training is offered with our Creatbot D600. We will spend several hours with you to discuss any product specific requirements & help you get the best possible outcomes from these 3d printers. We will also help you implement the 3d printer into your workflow, so you can rely on a team right here in Auckland. We also offer Free Phone based support, not just email. All spare parts are stocked right here in Auckland & sent same day in most cases with overnight courier. So should you need a spare part, your 3d printer isn't sitting there costing you money. Its surprising how many 3d printer companies advertise machines but don't stock parts for when you need them the most. We are New Zealand's EXCLUSIVE Creatbot Partner. We are also authorised Creatbot suppiers for Australia. We are the only company in the regions to offer FREE TRAINING with these 3D Printers so that you fully supported after buying the 3D Printer & not left alone to figure things out. There is no extra charge for this support service. This is the commitment we have put into the New Zealand & Australian 3D Printing Market - We want you to succeed with 3D Printing, & in your success is our success. We aim to have the BEST PRICE & BEST SERVICE for Everything 3D Printing  in NZ / AU. On top of our Free Training, we still Aim to be UNBEATEN on Price. So if you find the same product & a comparable service level anywhere world wide, please get in touch with us & we will usually be able to beat the competition.
  • Creatbot D600 Pro commercial 3d printer
    View Cart
    Add to cart / Details

    Creatbot D600 PRO Large Volume Commercial 3D Printer

    $21,000.00 +gst
    Big Parts, High Accuracy, & Reliability - In ALL Filament Materials currently available. The Creatbot D600 Pro is based on the successful D600 commercial grade FDM 3D printer. It features Servo Controlled motors & closed loop feedback electronics, giving it the most precise head calibration of any similar sized large scale 3D Printer on the market. It has become common to see low cost large size 3d printers on the market. So why would you buy this one? Just doubling the size of every single part & giving you a large bed, doesn't lead to a successful print. With cheaper printers you will see them advertise a size like 500x500mm, but when you actually try to print a part that size, your builds will consistently fail. Multi-day prints will be composed of layer shifts in the XY direction, even a 0.1mm XY shift will land your part in the rubbish bin. This is why real commercial grade 3d printers are designed to be able to produce what the spec sheet actually has on it. And that is the reliability you need, so that you dont come back to a 3 day print only to throw it in the bin. Large 600mm x 600mm x 600mm actively convection heated build volume makes it possible to print large parts one piece with ease. And the servo control system doesn't cause stepper drivers to overheat, which is all too common in kit style large 3d printers. Suited to producing large yet highly accurate 3d models, the D600 has every professional grade feature you would expect. Contact us today to see how our leading edge Creatbot D600 could give you the edge in product development & manufacturing. Please see full specification details below. Free training is offered with our Creatbot D600. We will spend several hours with you to discuss any product specific requirements & help you get the best possible outcomes from these 3d printers. We will also help you implement the 3d printer into your workflow, so you can rely on a team right here in Auckland. We also offer Free Phone based support, not just email. All spare parts are stocked right here in Auckland & sent same day in most cases with overnight courier. So should you need a spare part, your 3d printer isn't sitting there costing you money. Its surprising how many 3d printer companies advertise machines but don't stock parts for when you need them the most. We are New Zealand's EXCLUSIVE Creatbot Partner. We are also authorised Creatbot suppliers for Australia. We are the only company in the region to offer FREE TRAINING with these 3D Printers so that you fully supported after buying the 3D Printer & not left alone to figure things out. There is no extra charge for this support service. This is the commitment we have put into the New Zealand & Australian 3D Printing Market - We want you to succeed with 3D Printing, & in your success is our success. We aim to have the BEST PRICE & BEST SERVICE for Everything 3D Printing  in NZ / AU.
  • CreatBot DE Plus Tripple Head 3D Printer
    View Cart
    Add to cart / Details

    CreatBot DE Plus 2 Extruder 3D Printer – FREE Training – NZ Support

    $6,000.00 +gst
    CreatBot DE plus has 2 high temp 400 deg C Extruders, also available in 3 extruders. The DE plus uses Core XY gantry system, which means the heads are kept tightly controlled for greater accuracy & precision. High Speed Geared motors (not plain stepper motors) for exceptional Feed & Retraction reliability You can print with 2 or 3 different materials or colours at the same time.
  • CreatBot DE Plus Tripple Head 3D Printer
    View Cart
    Add to cart / Details

    CreatBot DE Plus 3 Extruder 3D Printer – FREE Training – NZ Support

    $6,400.00 +gst
    CreatBot DE plus has 3 high temp 400 deg C Extruders. The DE plus uses Core XY gantry system, which means the heads are kept tightly controlled for greater accuracy & precision. High Speed Geared motors (not plain stepper motors) for exceptional Feed & Retraction reliability You can print with 3 different materials or colours at the same time.
  • DX 3D Printer Door Hinge New Zealand
    View Cart
    Add to cart / Details

    Creatbot Door Hinge

    $5.00 +gst
    Hinges used for many Creatbot 3D Printers. Fits newer version of Creatbot DX, DE & also some versions of F160. Used with the clear plastic panels used on doors. 1 piece. Please buy as many as you need. Standard 40mm hinge that can work for many other applications.