-
Buildtak style Bed Mat designed for the Creatbot F160 & F160 PEEK 3d printer. This is a simple, easy to apply stick on mat that sticks on the bed of the 3d printer. It can even stick on an existing buildtak. Just peel the bottom & use like a sticker. Great adhesion for common materials like PLA, ABS, PETg, TPU. For a high wearing setup you can buy our matching Carbon Fibre Metal Plate to setup a removable bed system.
-
This is a Carbon Fibre reinforced spring steel sheet designed for the Creatbot F160 & F160 PEEK 3d printer Bed. It allows you to setup an easy removable build plate system by 3d printing on this plate, or attaching your chosen build surface onto this plate. Check out our matching Creatbot F160 Build Tak Bed Mat for a sleek & easy solution. This is a high wear resistant 3d printing surface that can provide good adhesion for PEEK & PEI or other advanced polymers, with appropriate surface glues. Ideal for those who 3d print with such materials extensively. You can print directly on Carbon Fibre plates with any material including PLA, but you must apply a little bit of Glue stick on this plate first. You can also buy our 200x200mm PEI sheet which are perfect to stick on this metal plate.
-
This is the Touch Sensor used on many 3d printers like our Creatbot F430 & new D600 for the Z axi homing & auto level. If the probe tip bends or breaks, you can easily replace the probe. After many months of High Temperature printing, it is common for the probe's internal magnetism to get demagnetised due to the heat in the chamber. This can cause it to stop clicking on & off. Please replace the probe as needed.
-
Standard Tube Cartridge Heater that slots inside the hot block. Has long wire leads. Suitable for all Creatbot D series 3d printers including DX , DX Plus, DE , DE Plus for all single, dual or triple head models.
-
Suitable for all Creatbot F series 3d printers including F430, F160, & their PEEK edition 3d printers. Standard Tube Cartridge Heater that slots inside the hot block. Has a small connector to plug on the board.
-
This is a temperature sensing Thermocouple for Creatbot F series 3d printers. They will fit all Creatbot F430 & F160 3d printers.
-
The CreatBot PEEK-300 is an ultra performance 3D printer specially optimised to work with ultra high performance advanced materials such as PEEK, PEKK, PEI (Ultem tm), etc polymers in a dedicated no-compromise environment. It is designed for high reliability and industrail performance at a price that is substantially cheaper than industrial additive manufacturing systems. 3D Print any advanced polymer filaments without any warping or shrinkage issues to deal with regardless of size. And thanks to the Patented DAS system, you won't need to anneal your prototpyes, saving you several hours & resources in post-print processing. An outline simple Industry specific use cases :
- Engine manfolds can be 3d printed using PEI 1010, which handles 200 deg C operating temp.
- FDA approved parts can be 3d printed using PEI 9085 to aid substantial weight reduction on aircraft, with a weight to strength ratio that is greater than aluminum, with all the necessary flame retardant properties.
- Hip, Knee & Jaw replacements for interbody transplants can be 3d printed using PEEK instead of titanium to aid MRI friendly post operative assessment & any future surgical planning.
- Medical tooling can be 3d printed using PPSF / PPSU & can survive commercial autoclave sterlisation exceeding 230 deg C & be exposed to bodily fluids as it is rated for use in biodiverse aqueus conditions.
- Patented Direct Annealing Hot end
- Water cooled triple heat isolatation system
- 500 deg C Dual Extruder Heads
- 120 deg C Active Thermal Chamber
- 200 deg C Heated Bed
-
The Teflon feed tube to connect the extruder to the head on Creatbot D series 3d printers like the Creatbot DX, DE etc. Includes the brass studs that the tube plugs into & locks into place. Screws on the head end & the extruder end. No assembly needed. Available for 3mm filament as well as 1.75mm filament based Creatbot D series machines. Please specify filament diameter, otherwise the default 3mm compatible tubes will be sent as they are more common. If your lugs break off, please consider buying this 1 piece ready tube.
-
Big Parts - High Accuracy - Production Capability - In All Common Filaments The Creatbot D1000 is our new top of the line Commercial grade FDM 3D printer, now updated with Servo Controlled Stepper motors & closed loop feedback electronics, giving it the most precise head positioning capability of any large scale 3D Printer on the market. Large 1000mm x 1000mm x 1000mm active heated build volume makes it possible to print large parts one piece with ease. Suited to producing large yet highly accurate 3d models, the D600 has every professional grade feature you would expect. Contact us today to see how our leading edge Creatbot D1000 could give your business & an edge in product development. Please see full specification details below. Free training is offered with our Creatbot F1000. We will spend several hours with you to discuss any product specific requirements & help you get the best possible outcomes from these machines. We also offer free implementation assistance at your site, so you can rely on a team right here in New Zealand. We are New Zealand's PREMIUM Creatbot 3D Printer Partner. We are the only one in NZ to offer FREE TRAINING with all these advanced Creatbot 3D Printers so that you fully supported after buying the 3D Printer & not left alone after the printer is delivered. There is no extra charge for this training service. This is the committment we have put into the New Zealand 3D Printing Market - We want you to succeed with 3D Printing, & in your success is our success. We aim to have the BEST PRICE & BEST SERVICE for Everything 3D Printing in NZ. On top of our Free Training, we still Aim to be UNBEATEN on Price. Please contact us to get a quote. If you find the same product & a comparable service level anywhere in New Zealand, please let us know as we will usually be able to beat the competition.
-
These relays are used in many 3d printers including the Creatbot F430, D600 & PEEK300. Usually they are used for the Bed heater or the Chamber heater. Please select which relay you want from the list. The triger voltage is 3-32V DC. Please pick the correct type. Be sure before you install it. Relays blow instantly if you get the trigger voltage wrong, or connect the wrong end into the wrong point.
-
These are the drivers used to drive the stepper motors on Creatbot 3d printers. They are used for the X Y Z axi motors as well as for the Extruder motors. Different drivers have been used for the X Y axi as well as for the Z & E1 / E2. Please choose the correct model number. If the model you have is not listed, please contact us & we will set it up for you.
-
This package includes our #1 selling F430 advanced 3d printer with a selection of common filaments, advanced materials & recommended accessories. If you are looking to further your 3d printing using ultra performance materials, this bundle has everything you need to get started. You'll still get the Free Training & Delivery too. Buying this bundle will save you $400! Choose $800 worth of any items, you're getting them HALF PRICE. Here are some popular items we suggest you to consider from: PLA filament (super easy versatile filament, a must have) Petg filament (easy yet capable, handles 65C & is a dense non-brittle material) Carbon Fiber reinforced PETg filament (easy to print, good stiffness, handles 85C with low moisture uptake) ABS reinforced Carbon Fiber Filament (best light weight filament that offers impact resistance, 120C temp, & light weight parts) ESD safe ABS (excellent for electronic components that may be near magnetic fields) Nylon PA filament (great for bushes & places with lubrication or chemicals) Polycarbonate Filament (excellent heat resistance, impact resistance, & flexibility) PEKK ultra performance filament (as good as PEEK yet easier to print on F430) Martensitic & Stainless nozzles, heat brake tubes Hot end parts like temp sensors & heaters Garolite bed sheet & glues (a great build surface for the F430, & a good glue helps with printing Nylons) Choose any filaments & items worth $800. Here are some common filaments that make a good bundle: Want a package customised to your specific needs? No problem, we can make a package deal that suits your needs. Please contact us & we'll make a discounted package just for you.
Alex L2023-11-28I have dealt with the 3D Printer Store for several months now and have to say that the experience has been very positive. Zubbin is extremely knowledgeable in this field, enthusiastic, honest and responsive. Pre and Post Purchase customer support has been great. He will have your best interest in mind and will recommend the best product for your needs. My positive experience dealing with him professionally has led me to buy product from him for personal use. We are very lucky to have such a supplier providing these kinds of specialized 3D Printers, Filaments, accessories and services in New Zealand. The rare filaments can sometimes be difficult to source but he will do his best to find alternatives to get what's needed ASAP or even suggest proper alternatives. I am looking forward to future collaboration with this supplier.
Elias Bayless2023-10-18First choice for all my 3d printing needs, the team here really does a great job! Always get my filament here and it arrives really fast and always performs very well in my printer.
Lyle Adams2023-10-18I recently purchased a 3D printer from this business and also took their training. Zubbin's knowledge and assistance is top-notch. He provided valuable insights not only on 3D printing but also related topics. Highly recommended!!
Dylan Cooper2023-09-19Solid company to deal with. I have ordered filament multiple times from this company. I have also been advised on better filament options than what I ordered, which worked out really well. Will continue to shop here!
Maarten van den Heuvel2023-08-21Good prices, fast shipping, excellent communication and when there was a hiccup with my order it was sorted super fast and to my full satisfaction. Can recommend.
Phil Shimmin2023-08-16Great service from these guys. On my most recent order there was a stellar turnaround of only 24 hours between initial stock query and the filament being in my printer.
Dan King2022-09-29Shipping and packaging was excellent and best in market pricing. I had an issue with a misunderstanding about the particular properties of the resin I purchased but Zubbin responded quickly and helped me resolve the issue. Perfect customer service, they have gained a loyal customer.
Mike O2022-09-12These guys are awesome. I used to buy my filament from overseas for my projects and needed something in a hurry and went looking for something local. I'm so glad I did. Not only are the prices as good or better than what I was getting overseas and even more of a deal when considering the pricing I was paying for shipping their turn around each time has been next day. Great range of in stock filaments, good prices, super fast turn around and excellent customer service.
Dion Hitchens2022-08-09Kia ora, This is a fantastic business selling reliable machines at a great price point. What I am impressed with the most is that the owner is always willing to help if I have a problem his insight and knowledge he is so willing to share is always on point and allows me to solve the problem I am trying to resolve. I look forward to doing more business with them. thanks
Michael Williams2022-06-28Sent them an email explaining what I was trying to achieve and asked for their advice. They responded promptly and recommend a basic 3d printer which turned out absolutely fit for purpose. Ordered online and with good communication i had printer within days. Will definitely return when I upgrade. This printing stuff is very addictive.