NZ’s Specialist in Professional 3D Printers

We’ve got new items & specials running on selected products.

We don’t just sell 3d printers. We partner with engineers, makers & thinkers to accelerate productivity & unlock the potential of their vision.
3D Printer Store is the business backing many other cutting-edge businesses, startups & innovators get to market faster, & at a lower cost.

There’s too many choices out there, too many youtube videos, & too many experts on facebook groups.
Lets us help you cut through the chatter & get you on the right track from the get go.
Feel free to Contact us, we’d love to discuss the right solution for your needs.

Check out the Phrozen Resin 3D Printers & their top quality 3d printing resins we stock, including engineering resins.
We have the largest selection of professional grade 3d printers in New Zealand to make functional usable parts.

The worlds strongest Nylon HT Filaments are now available along with matching support materials.
There’s also advanced materials on offer including PEI & PEEK.

To explore everything we have on special, please click here or on SALE link in the menu.

Sale T&Cs apply.

Vacuum Forming (3)
3D Print Service (8)
3d printer repair service NZ (7)
Brands (164)
3D Printing Resin (30)
3D Printers (26)
3D Printer Parts & Accessories (87)
3D Printing Bundles (4)
3D Printing Filament (148)
3D Scanners (1)
Deli Glue Stick for 3D Printing – Improve Adhesion Reduce Warping

$3.00 +gst

Deli Yellow is an affordable versatile glue stick that works really well on all bed surfaces for all 3d printers. PLA, ABS, ASA, Nylon, HIPS will benefit from glue. You will need glue when 3d printing with Nylon, Carbon Fibre, PolyPropylene, & other Engineering materials that don't like to stick to other surfaces. Applying glue greatly reduces warping. You can start with this cheapest glue stick, & then move to get more specialised glue sticks from our collection of bed prep adhesives if needed. Just apply a thin layer of this glue on a warm build surface, & print directly on it.
Creatbot Door Hinge

$5.00 +gst

Hinges used for many Creatbot 3D Printers. Fits newer version of Creatbot DX, DE & also some versions of F160. Used with the clear plastic panels used on doors. 1 piece. Please buy as many as you need. Standard 40mm hinge that can work for many other applications.
Wanhao i3 Idler Pulley

$7.00 +gst

Pulley for the belt rail system on Wanhao i3 & similar 3d printers. Will work on i3 plus as well new i3 plus mark 2. Is also compatible with many other 3d printers, but please check to be sure.
Paper Painters Tape – Best 3D Printing Build Surface

$10.00 +gst

Painter Paper Tape - Good quality specially sourced for NZ conditions
The secret to excellent 3d printing is that the first layer of your part should stick perfectly to your bed. But with so much confusion around what is best, from hair sprays to abs slurries, what really works well? ANd there are so many rolls of paper tape too, which one should you get? We've done a lot of testing, looked at branded as well as OEMs, & finally selected this one. Start with a roll of this tape. It is the most versatile 3d printing bed material & can be used with PLA, ABS, PETG, NinjaFLex, Poly Carbonate, Metal fills & even Carbon fibre. It also helps with levelling beds when metal beds slowly start to warp. Its easy to discount something so cheap, but try it & you will be impressed.. This inexpensive tape will last a long time & is easy to replace.
Cutting & Finishing Pliers

$10.00 +gst

Best Tool for 3D Print Cleanups
These are jewellery grade snipping cutters. Great product for a top price - now in NZ, dont pay upto 200% more.. They are great to remove tiny bits of plastic or some support material without hurting yourself. This humble tool might look like any ordinary cutter, but its much more! The blades sharpened edges are at a horizontal angle & designed to cut close to the part surface. The spring loaded handles allow for careful & controlled cutting. The thin tip allows cleanup in harder to reach places. It is also excellent to cleanup the nozzle without hurting yourself. Try this excellent tool out - you will be impressed! Please note the colour is random, it can be either Red, Blue, Yellow, Orange.
Buy 3D Print Service NZ

$10.00 +gst

Dear 3D print service customers, After you receive the confirmed 3D Print cost from us, please use this to place an order equal to the cost we agreed on. For eg, if the cost is $50, please select quantity of 5, so the total will be $50. We realise this is not an ideal system & are working to make it better. Thank you for your co-operation until then.
Wanhao i3 Extruder bearing

$10.00 +gst

Linear Bearing with outer plastic cover & mount holes. Fit the extruder rail assembly on Wanhao i3 & similar 3d printers. Can also be used as platform bearings. Will work on i3 plus as well new i3 plus mark 2. Is also compatible with many other 3d printers, but please check to be sure.
FlashForge Filament Guide Tube

$10.00 +gst

Suitable for FlashForge 3D Printers including Adventurer , Finder, Inventor, Guider & similar 3d printers.
Creatbot aluminum Door handles

$10.00 +gst

Genuine Creatbot door handles. These are the slim thin silver coloured aluminum door handles on newer Creatbot 3d printers with hinged doors. They are the smaller size (approx 80mm long), which are used for DX, DE, F160. They are also used on the rear chamber doors of the F430. These are attached to the Acrylic doors on the D series, & corresponding door frames on F series machines.
Nozzle Cleaning Filament for 3D Printers – 1.75mm

$13.99 +gst

Cleaning filament will clean your 3d printer head quickly & easily. This 100 gram packet which will last you a VERY LONG TIME! Excellent to clean the head system of debris thats stuck inside the hot end & nozzle. Please read this article on how to use cleaning filament with a cold extrusion pull. Simply extruding this filament through the head will help clean it, but is not enough to get the best clean. Please follow the above article for better results.
Wanhao i3 mk2 Magnetic Metal Mat Lower Sheet

$15.00 +gst

Genuine Wanhao Branded lower metal sheet to be stuck on the printer platform, on which you can then use magnetic mats & magnetic sensors. This is used on Wanhao i3 Mk2 (also called i3 v2) 3d printers, the new version of D5s, & other such machines. This is not the actual print surface, its the metal sheet on which the build surface sticks magnetically. For older version of the i3 please buy the other BuildTak style bed mat which has glue on one side. Works extremely well for most materials like PLA, ABS & PETG.
3D Filament Spool Holder External Roller

$15.00 +gst

These simple external filament rollers can be used to put filament rolls of any size outside your printer & feed into the 3d printer. Great to load 3kg spools of filament into smaller printers. This works easily with rolls of any size including 1kg, 3kg, 5kg etc. The bearings allow rolls to turn freely, regardless of weight. The 2 pieces can be placed as far or as near as possible, based on the width of the rolls. Particularly useful for small light weight 3d printers which would otherwise topple when a heavy roll was mounted on them.
Phrozen LCD Frame Tape 9.3″

$16.00 +gst
This pre-cut and molded tape simplifies the installation of your LCD screen. No need to cut the tape—just place it and secure your screen with ease. Tips:

Use this LCD frame sticker tape to secure your printer's LCD screen after replacement.

The tape is single-use; confirm its position before applying.

Press down evenly when applying the tape to avoid creases.

After installation, perform a Z-axis calibration test.
Magnetic Bed Level Sensor Probe for 3D Printers

$19.00 +gst

This is an inductive sensor for 3d printers like Wanhao i3 plus mk2, D6, & D9. It will suit most other 3d printers that use magnetic proximity sensors for bed levelling. Or for any other applications where a magnetic sensor is used for proximity, detection, limit switching etc.
Head Miniboard for Wanhao 3d printers

$19.00 +gst

Head board for 3d printers like Wanhao i3 plus mk2, D6, D9, D9 mk2 etc. This is the little PCB that sits on top of the main head where you plug in the heater, temp sensors, etc.
Creatbot XYZ Stepper Driver

$19.00 +gst

These are the drivers used to drive the stepper motors on Creatbot 3d printers. They are used for the X Y Z axi motors as well as for the Extruder motors. Different drivers have been used for the X Y axi as well as for the Z & E1 / E2. Please choose the correct model number. If the model you have is not listed, please contact us & we will set it up for you.
Phrozen LCD Frame Tape 10″

$19.00 +gst
This pre-cut and molded tape simplifies the installation of your LCD screen. No need to cut the tape—just place it and secure your screen with ease. Tips:

Use this LCD frame sticker tape to secure your printer's LCD screen after replacement.

The tape is single-use; confirm its position before applying.

Press down evenly when applying the tape to avoid creases.

After installation, perform a Z-axis calibration test.
Wanhao i3 thermister temperature sensor for head or bed

$20.00 +gst

This is a temperature sensing thermister for Wanhao i3 3d printers. The thermisters for bed & nozzle are the same, however the wire length is slightly different. Please specify if you want one for the head, or for the nozzle. Please also specify which wanhao i3 3d printer type it is for: i3, i3 v2, i3 plus, i3 plus mk2, or i3 mini.
Creatbot F series Mk8 machined brass nozzle

$20.00 +gst

Genuine Creatbot brass nozzle for 1.75mm 3d printers. Will suit all Mk8 head 3d printers including all the Creatbot F series 3D Printers we sell: Creatbot F160, F160 PEEK, F430, F430 PEEK edition, PEEK-300, & D600 Pro 3d printers Our nozzles are individually Machined (not die casted & pressed like cheaper nozzles). The internal orifice & crucible shape of the nozzle is carefully manufactured, meaning you get less jams & clean flow without ripples. They will out last most cheaper nozzles on the market, & provide more consistent & reliable feeding as the diameter is accurate. These nozzles will work fine with all Mk8 thread extruder hot ends. So no matter your 3d printer, try out a higher quality nozzle that causes less problems & needs less changing. We stock a wide range of nozzle diameters 0.2, 0.3, 0.4, 0.6, 0.8 & 1mm. Please choose your size from the dropdown. We also sell Stainless Steel & hardened Martensitic steel nozzles which are superior to brass nozzles as they last longer. We recommend martensitic nozzles for Carbon Fiber 3d printing. And in general, Stainelss steel nozzles are better than brass even for general purpose 3d printing including using with Wood PLA.
Creatbot D Printers Head Cartridge Heater

$20.00 +gst

Standard Tube Cartridge Heater that slots inside the hot block. Has long wire leads. Suitable for all Creatbot D series 3d printers including DX , DX Plus, DE , DE Plus for all single, dual or triple head models.
Creatbot D series 3D Printer Throat Tube Heat Brake

$20.00 +gst

Genuine Creatbot Throat Tube which connects onto the heat sink on top & the nozzle goes at the bottom. If you have replaced nozzles & still find there are extrusion issues, please consider changing this part. This tube is considered part of the heat break mechanisk, & has a partial teflon coating on the top to aim smooth extrusion. So it is recommend you change this tube as needed for the best uniformity in extrusion as well as reduction of jams or blockages particular in longer 3d prints. Will suit all Creatbot D series 3D Printers we sell including DM, DX, DE, the Plus versions, & the older D600 3mm machines
Creatbot F series 1.75mm Teflon lined Heat Brake Tube

$20.00 +gst

Genuine Creatbot Throat Tube which connects the hot block into the extruder mechanism. This is the teflon tube lined version which makes it easy to print PLA, PETg etc thanks to the teflon liner. But it will only operate up to 260C, please do not print hotter than that else you will damage the teflon liner. The heat sink & the nozzle is attached at the bottom of this piece. If you have replaced nozzles & still find there are extrusion issues, please consider changing this part. This tube is considered part of the heat break mechanisk, & has a partial teflon coating on the top to aim smooth extrusion. So it is recommend you change this tube as needed for the best uniformity in extrusion as well as reduction of jams or blockages particular in longer 3d prints. Will suit all Creatbot D series 3D Printers we sell including F160, F160 PEEK, F430, F430 PEEK, D600 PRO (not the older D600)
Creatbot F series 1.75mm Full Metal Hotend Heat Brake Tube

$20.00 +gst

Genuine Creatbot Throat Tube which connects the hot block into the extruder mechanism. This is the Full Matal hot end which doesn't have a teflon liner inside, allowing you to easily print Carbon Fiber as well as high temp materials up to 450C. If you are new to 3d printing, you might find it useful to start with the other Teflon lined heat brake version as it can be easier to print common materials like PLA & ABS with that one. The heat sink & the nozzle is attached at the bottom of this piece. If you have replaced nozzles & still find there are extrusion issues, please consider changing this part. This tube is considered part of the heat break mechanisk, & has a partial teflon coating on the top to aim smooth extrusion. So it is recommend you change this tube as needed for the best uniformity in extrusion as well as reduction of jams or blockages particular in longer 3d prints. Will suit all Creatbot D series 3D Printers we sell including F160, F160 PEEK, F430, F430 PEEK, D600 PRO (not the older D600)
FlashForge Creator 3 Pro Hardened Steel Nozzle

$20.00 +gst

This is a Genuine FlashForge brand Hardened steel nozzle suitable to 3d print Carbon Fiber filaments as well as higher temperature materials. These hard nozzles are suitable for FlashForge Creator 3 PRO & Creator 4 series 3d printers. They will not fit the Creator 3 V2 or older Creator 3 machines with the long 1 piece nozzle type. 0.6mm nozzle diameter is recommended for Carbon Fiber, Glass, & Wood based filaments as it reduces chances of blockages & under-extrusion over longer prints. These nozzles also double or triple your effective throughput, thereby allowing your 3d prints to be completed much faster, usually 2 to 3 times faster! Hardened nozzles are the best type that do every kind of 3d printing really well. Simply unscrew the existing nozzle & screw the new one on, easy. Please remember to always heat your hot end before removing your nozzle. Please choose your size, else we will send a 0.4mm by default.
Phrozen LCD Screen Protector 10″-15″

$22.00 – $35.00 +gst

Phrozen screen protector is made of durable and high-transparency material to protect your LCD screen from the risk of resin spilling & damaging your LCD screen. This works beautifully without affecting your prints. Just relevel your bed after you stick it on the lcd screen of your resin 3d printer & you are good to go.
Creatbot D series 3D Printer Thermocouple Temperature Sensor

$25.00 +gst

This is a temperature sensing Thermocouple for Creatbot D series 3d printers like DX, DE. Loose contacts with the temp sensor can cause inaccurate readings, which compromises the accuracy of your plastic flow. With a new temp sensor, you ensure optimal temperature control for your Creatbot DX & DE machines. This means more accurate & stronger 3d prints without under-extrusion & layer delamination.
Creatbot F series Printers Head Cartridge Heater

$25.00 +gst

Suitable for all Creatbot F series 3d printers including F430, F160, & their PEEK edition 3d printers. These are genuine Creatbot supplied 24V 60W cartridge heaters which can handle up to 450C reliably. We don't recommend cheaper 40W heaters as they only go to 250C reliably. Creatbot high temp hot ends support up to 420C so please be mindful the heater you use i Standard Tube Cartridge Heater that slots inside the hot block. Has a small connector to plug on the board so its really easy to install.
Creatbot F series 3D Printer Thermocouple Temperature Sensor

$25.00 +gst

This is a temperature sensing Thermocouple for Creatbot F series 3d printers. They will fit all Creatbot F430 & F160 3d printers.
Creatbot F series part cooling fan

$25.00 +gst

This is a 24V DC radial fan used as the part cooling fan on Creatbot F430 & F160 3d printers. It is mounted to the side of the extruder 1 (between 1 & 2 if its a dual extruder machine) & plugs into the top extruder board above the head.
Creatbot extruder filament feeder Drive Gear cog

$25.00 +gst

This is the feeder gear that pushes filament inside the extruder on Creatbot F430, PEEk300, D600 Pro v1, & F160 series 3d printers. These cogs are made of hardened nickel stainless steel composite for optimum durability without being brittle. Most cheaper black feeders are made of carbide steel that can crack teeth & cause a jam in the hot end. This drive gear is mounted on the stepper motor inside the head. It is the cog that grips the filament & pushes it down the heat brake towards the hot end. Needs to be changed after a while when its teeth start to wear. Will wear more if using lots of Carbon or Glass Filled filaments.
Creatbot D600 pro2 D1000 Temp Sensor

$25.00 +gst

Loose contacts with the temp sensor can cause inaccurate readings, which compromises the accuracy of your plastic flow. With a new temp sensor, you ensure optimal temperature control for your Creatbot DX & DE machines. This means more accurate & stronger 3d prints without under-extrusion & layer delamination.
Creatbot D600 pro 2 D1000 Cartridge Heater

$25.00 +gst

Suitable for Creatbot D600 Pro 2 & D1000 3d printers. These are genuine Creatbot supplied 24V 60W cartridge heaters which can handle up to 450C reliably. Creatbot high temp hot ends support up to 420C so please be mindful the heater you use. Not for older D600s, F430, F160, or PEEK edition 3d printers. Standard Tube Cartridge Heater that slots inside the hot block. Has a small connector to plug on the board so its really easy to install.