-
Genuine Creatbot Throat Tube which connects the hot block into the extruder mechanism. This is the teflon tube lined version which makes it easy to print PLA, PETg etc thanks to the teflon liner. But it will only operate up to 260C, please do not print hotter than that else you will damage the teflon liner. The heat sink & the nozzle is attached at the bottom of this piece. If you have replaced nozzles & still find there are extrusion issues, please consider changing this part. This tube is considered part of the heat break mechanisk, & has a partial teflon coating on the top to aim smooth extrusion. So it is recommend you change this tube as needed for the best uniformity in extrusion as well as reduction of jams or blockages particular in longer 3d prints. Will suit all Creatbot D series 3D Printers we sell including F160, F160 PEEK, F430, F430 PEEK, D600 PRO (not the older D600) -
This is a temperature sensing Thermocouple for Creatbot F series 3d printers. They will fit all Creatbot F430 & F160 3d printers. -
Genuine Creatbot brass nozzle for 1.75mm 3d printers. Will suit all Mk8 head 3d printers including all the Creatbot F series 3D Printers we sell: Creatbot F160, F160 PEEK, F430, F430 PEEK edition, PEEK-300, & D600 Pro 3d printers Our nozzles are individually Machined (not die casted & pressed like cheaper nozzles). The internal orifice & crucible shape of the nozzle is carefully manufactured, meaning you get less jams & clean flow without ripples. They will out last most cheaper nozzles on the market, & provide more consistent & reliable feeding as the diameter is accurate. These nozzles will work fine with all Mk8 thread extruder hot ends. So no matter your 3d printer, try out a higher quality nozzle that causes less problems & needs less changing. We stock a wide range of nozzle diameters 0.2, 0.3, 0.4, 0.6, 0.8 & 1mm. Please choose your size from the dropdown. We also sell Stainless Steel & hardened Martensitic steel nozzles which are superior to brass nozzles as they last longer. We recommend martensitic nozzles for Carbon Fiber 3d printing. And in general, Stainelss steel nozzles are better than brass even for general purpose 3d printing including using with Wood PLA. -
This is a 24V DC radial fan used as the part cooling fan on Creatbot F430 & F160 3d printers. It is mounted to the side of the extruder 1 (between 1 & 2 if its a dual extruder machine) & plugs into the top extruder board above the head. -
Suitable for all Creatbot F series 3d printers including F430, F160, & their PEEK edition 3d printers. These are genuine Creatbot supplied 24V 60W cartridge heaters which can handle up to 450C reliably. We don't recommend cheaper 40W heaters as they only go to 250C reliably. Creatbot high temp hot ends support up to 420C so please be mindful the heater you use i Standard Tube Cartridge Heater that slots inside the hot block. Has a small connector to plug on the board so its really easy to install. -
This is the USB reader board used on a Creatbot F430 & F160 3d printer. This is the Latest version board with an adapter to allow certain older printer models to also be able to use it. -
This package includes our #1 selling F430 advanced 3d printer with a selection of common filaments, advanced materials & recommended accessories. If you are looking to further your 3d printing using ultra performance materials, this bundle has everything you need to get started. You'll still get the Free Training & Delivery too. Buying this bundle will save you $200! Choose $600 worth of any items, but pay only $400 for them. Here are some popular items we suggest you to consider from: PLA filament (super easy versatile filament, a must have) Petg filament (easy yet capable, handles 65C & is a dense non-brittle material) Carbon Fiber reinforced PETg filament (easy to print, good stiffness, handles 85C with low moisture uptake) ABS reinforced Carbon Fiber Filament (best light weight filament that offers impact resistance, 120C temp, & light weight parts) ESD safe ABS (excellent for electronic components that may be near magnetic fields) Nylon PA filament (great for bushes & places with lubrication or chemicals) Polycarbonate Filament (excellent heat resistance, impact resistance, & flexibility) PEKK ultra performance filament (as good as PEEK yet easier to print on F430) Martensitic & Stainless nozzles, heat brake tubes Hot end parts like temp sensors & heaters Want a package customised to your specific needs? No problem, we can make a package deal that suits your needs. Please contact us & we'll make a discounted package just for you. -
Buildtak style Bed Mat sized for the Creatbot F430 3d printers, approx 500x320mm. This is a simple, easy to apply stick on mat that sticks on the bed of the 3d printer. It can even stick on an existing buildtak. Just peel the bottom & use like a sticker. Great native adhesion for common materials like PLA, ABS, PETg, TPU. -
Genuine Creatbot high temp 420 degree rated hot end for F series 1.75mm 3d printers. Will suit all Creatbot F 3D Printers we sell including Creatbot F160, F160 PEEK, F430 & F430 PEEK edition 3d printers. This hot end will work for all materials upto 420C. This hot end doesnt have a teflon liner so it can be used with abrasive materials like carbon fibre. It will also work for PLA & other common materials. However, for beginners, we sometimes recommend printing those sorts of entry level materials with the standard temp hot end which has a teflon liner, which aids the smoother flow of PLA. So its a little more forgiving for times when your settings may not be quite perfect. However this teflon can be worn off by abrasive materials like Carbon Fiber, so for such materials we recommend printing with the high temp hot end which doesnt have that liner. If you also need a new temperature sensor thermister or thermocouple, or a new cartridge heater, please buy them separately. -
Genuine Creatbot standard 260 degree rated hot end for F series 1.75mm 3d printers. Will suit all Creatbot F 3D Printers we sell including Creatbot F160, F160 PEEK, F430 & F430 PEEK edition 3d printers. This hot end is only for materials upto 260C. To print hotter, please use buy the High Temp Extruder hot end. The advantage of the standard hot end is that it has a teflon liner inside which aids smooth flow of materials like PLA. However this teflon can be worn off by abrasive materials like Carbon Fiber, so for such materials we recommend printing with the high temp hot end which doesnt have that liner. If you also need a new temperature sensor thermister or thermocouple, or a new cartridge heater, please buy them separately. -
Creatbot F430 NX - NZ's Most Advanced Desktop 3D Printer
The new Creatbot F430 NX offers High Speed IDEX - Independent Dual Extruders. It can print with both heads at the same time, with all materials presently available.
And with a heated chamber up to 70C - it can 3d print engineering materials reliably. The F430 NX is the only IDEX High speed desktop 3d printer on the market with this capability. So you now have multiple material capability, high speed cloning, & dual colour support. The build speed of the F430NX is thus much faster than if you used material changeover systems that cut filament each time & feed into the same head.The F430 NX also supports 420C hot ends & an active heated chamber.
Why buy a High Temperature capable 3d printer?
Machines like the Creatbot F430 are not only for high performance materials. They are much better at printing everything else. So the features that make the F430 a stunning desktop 3d printer are actually going to help anyone make better 3d prints time & time again even with the simplest of materials like PLA.
This machine can 3d print with any material currently available in filament form, including the entire range of Carbon Fibre reinforced Nylon 6/12, Carbon PetG, Carbon Fibre PEI, Carbon Fibre PEKK, PEEK, PEKK, PEI, PPSU, PSF, ESD PC etc They will also print all your common PLA, ABS, ASA, PETG, TPU, etc extremely accurately.
Why buy from us?
Free Training with the Creatbot F430 NX 3d printer.
Phone Support, not just email support.
Fully Calibrated Material Specific Profiles for over 40 different requirements.
On top of our Free Training & Support, we still Aim to be UNBEATEN on Price. So if you find the same product & a comparable service level anywhere, please get in touch with us & we will usually be able to beat the competition.
Please see Details & Technical Specifications below
-
Creatbot F430 - NZ's Most Advanced Professional Desktop 3D Printer
With the new & improved Creatbot F430, you can 3D Print any material currently available in filament form. An Advanced versatile desktop 3D Printer with superb performance. Get the F430 & you will never look back. Why buy a High Temperature capable 3d printer? Machines like the Creatbot F430 are not only for high performance materials. They are much better at printing everything else. So the features that make the F430 a stunning desktop 3d printer are actually going to help anyone make better 3d prints time & time again even with the simplest of materials like PLA. This machine can 3d print with any material currently available in filament form, including the entire range of Carbon Fibre reinforced Nylon 6/12, Carbon PetG, Carbon Fibre PEI, Carbon Fibre PEKK, PEEK, PEKK, PEI, PPSU, PSF, ESD PC etc They will also print all your common PLA, ABS, ASA, PETG, TPU, etc extremely accurately.Why buy from us?
Free Training with the Creatbot F430 3d printer. Phone Support, not just email support. Fully Calibrated Material Specific Profiles for over 40 different requirements. We aim to have the BEST PRICE & BEST SERVICE for Everything 3D Printing in NZ. On top of our Free Training & Support, we still Aim to be UNBEATEN on Price. So if you find the same product & a comparable service level anywhere in New Zealand, please get in touch with us & we will usually be able to beat the competition. Please see Details & Technical Specifications below -
This motor is used in the Creatbot F430 3d printer. It is the X axi motor that connects on the linear rail to move the head left to right. This is the motor only, not the fan/heatsink. Please remember to put the heatsink & fan from your old motor onto the new motor. -
This motor is used in the Creatbot F430 3d printer. It is used as a Z axi motor that connects at the bottom to move the bed up & down using the ball screws. -
If you find that the machine can't detect filament despite loading it, then this sensor may need replacing. Before replacing the sensor, ensure there is no filament shard inside obstructing it. And also check that the limit switch inside has not bent. Such fixes are simple & may not need replacing the whole sensor. In some machines such as the previous F430's, the sensor board is mounted on the head. On newer PEEK300 & D600 pro 2, the sensor board is mounted in the filament chamber on the aluminum housing as per the photo above. -
This is the new quick change nozzle assembly that includes a heat brake. Works on all new Creatbot D600 Pro 2 HS & Creatbot D1000 HS series 3d printers. It will not work on older D600 Pro 2 machines, or older D1000 3d printers. Please contact us if you are unsure. -
Best Quality Creatbot Hardened Martensitic Steel nozzle for 1.75mm 3d printers to print high temperature & composite reinforced materials. Perfect for 3d printing Carbon Fiber, Glass Fiber, Kevlar, etc on Creatbot F430, F160, PEEK300 & D600 Pro 3d printers. Martensitic Steel nozzles are the best nozzles presently available. They are the most durable nozzles compared to brass or stainless steel. Hardened martensitic steel allows much cleaner retractions than brass nozzles, which interestingly also improves the overall print quality. These nozzles can be used with Carbon Fiber filaments, however please be advised 0.4mm is on the smaller side for carbon to flow through well. Milled Carbon Fiber Nylon when printing small parts should be ok, but for larger longer prints, we recommend using 0.6mm nozzles for Carbon Fiber composite materials. These are well suited particularly for advanced materials that print at ultra high temps like PEEK, PEI Ultem, PPSU etc. Our nozzles are individually machined for optimum precision & longer life (not just die casted & pressed like inferior nozzles). Will suit all Creatbot F series & PEEK series 3D Printers we sell: Creatbot F160, F430, PEEK 300 & D600 Pro 3d printers Please choose from diameters 0.4, 0.6, 0.8 mm Our nozzles can also be used with other Mk8 compatible 3d printer heads. -
The CreatBot PEEK-250 is a compact ultra performance 3D printer specially designed to work with high performance advanced materials such as PEI (Ultem tm), PSU, PEEK etc. It is designed for high reliability and industrial performance at a footprint that is substantially smaller than other industrial additive manufacturing systems. High performance Polymers & Composites are commonly used to additively manufacture high performance end use parts in aerospace, automotive, robotics & medical industries. Special Features found only on the Creatbot PEEK-250:- 200C heated chamber
- 200 C Heated Bed
- 180C built in Annealing system.
- 480 C Actively cooled Extruder Head
-
The CreatBot PEEK-300 is an ultra performance 3D printer specially optimised to work with ultra high performance advanced materials such as PEEK, PEKK, PEI (Ultem tm), etc polymers in a dedicated no-compromise environment. It is designed for high reliability and industrail performance at a price that is substantially cheaper than industrial additive manufacturing systems. Ultra performance Polymers & Composites are the future in additive manufacturing of production parts on demand. Special Features found only on the Creatbot PEEK 300:- Water cooled triple heat isolation heads
- Patented 400C Direct Annealing Air system.
- 480 C Dual Lifting Extruder Heads
- 120 C Active Heated Chamber
- 200 C Heated Bed
-
Power Interruption Circuit board for Creatbot desktop series D & F series 3d printers including DM , DX / DX Plus & DE / DE Plus 3D, F160 / F160 PEEK & F430 PEEK 3D Printer Printers. For D600 PRO series, PEEK 300 & F1000 series, please contact us for the appropriate part. This circuit board detects if there is a power failure while your Creatbot 3d printer is printing. Then when power resumes & the printer is started, the option to resume to resume the existing print is offered. This circuit is not critical, & the printer can still continue to be used with the board's white wire unplugged. Locations where there are excessive power outages seem to cause this board to blow out more frequently than other places. This is mainly because of spikes & voltage fluctuations in such locations. If you experience the need to frequently replace these, we recommend connecting your printer through a spike protector. -
Creatbot S-PAHT is a dedicated breakaway support filament optimised to work with high temp Nylons & Poly Carbonates. This gives you a smooth surface finish where the support is removed. This support material works well with our Carbon Fiber reinforced Nylons & Glass Fiber Nylons & PC-CF as well. If you print supports with the same material as the part, the area where support sticks is usually rough. Breakaway supports fix this problem by providing more contact while being easy to break off. Dual extruder 3d printers or multi material systems or AMS are required to use support materials. -
Ultra PA-CF is our top-tier nylon 3D printing material, featuring a high-temperature nylon base reinforced with 25% chopped carbon fiber. This advanced material offers exceptional characteristics including low moisture absorption, superior strength, outstanding wear resistance, excellent chemical resistance, and remarkable heat tolerance. During the printing process, Ultra PA-CF maintains excellent dimensional stability and eliminates edge warping issues, making it an ideal choice for producing high-quality finished parts in various industrial sectors. -
These are the drivers used to drive the stepper motors on Creatbot 3d printers. They are used for the X Y Z axi motors as well as for the Extruder motors. Different drivers have been used for the X Y axi as well as for the Z & E1 / E2. Please choose the correct model number. If the model you have is not listed, please contact us & we will set it up for you. -
Best Tool for 3D Print Cleanups
These are jewellery grade snipping side cutters. They have a flat blade on the cutting edge, meaning they can cut quite close to surface. They are great to remove tiny bits of plastic or some support material without hurting yourself. This humble tool might look like any ordinary cutter, but its much more! The blades sharpened edges are at a horizontal angle & designed to cut close to the part surface. The spring loaded handles allow for careful & controlled cutting. The thin tip allows cleanup in harder to reach places. It is also excellent to cleanup the nozzle without hurting yourself. Try this excellent tool out - you will be impressed! Please note the colour is random, it can be Red, Blue, Green, Yellow, Orange. -
Deli Yellow is an affordable versatile glue stick that works really well on all bed surfaces for all 3d printers. PLA, ABS, ASA, Nylon, HIPS will benefit from glue. You will need glue when 3d printing with Nylon, Carbon Fibre, PolyPropylene, & other Engineering materials that don't like to stick to other surfaces. Applying glue greatly reduces warping. You can start with this cheapest glue stick, & then move to get more specialised glue sticks from our collection of bed prep adhesives if needed. Just apply a thin layer of this glue on a warm build surface, & print directly on it. -
The Ultimate Engineering Resin collection
The Best Functional resins we have come across are in this collection. If you want to 3d print more than just pretty looking parts, this package will give handle every possible Engineering application you can think of. Materials included are: Onyx Impact Resin PC-GF Glass Filled Poly Carb simulating Resin Nylon like Green Resin TR300 high temp resin Wax Casting Resin Rubber Flexible Resin Flame Retardant Resin Resin cleaning liquid (Alcohol free, safe, non-combustible) -
This is an upgraded, full metal build platform for EPAX E10 3D printers. It is compatible with all version of the E10 printer including the new E10 5K. The unique top bracket has been specially designed to fit E10 printers for optimum performance. It is a fully angled bed to allow the resin to flow down smoothly. Using this build platform will minimize resin accumulation on the top of the plate, allowing it to more readily drip back into the vat during printing. This makes clean-up and print removal faster, easier, and less messy overall so that you can spend more time printing. If you print a lot, or print very fast, or print larger parts, this all-metal build plate is the perfect choice. -
Esun ABS+ is a Low Warp ABS 3D Printer Filament The new Esun ABS plus is a new formulation of ABS that allows for high speed 3d printing on modern 3d printers with reduced warping. It also works well with larger nozzles & fatter layers to improve build speed with high flow 3d printers. This is the easiest to 3d print ABS filament available to date for any 3d printer. The additives in ABS+ reduce corner warpage & improve part strength even when printed fast. This helps 3d printing ABS reliably in machines that dont have heated chambers. This new type of ABS 3d filament is suited to 3d printing finer ABS parts with a matted finish. 3D Prints with the same temperatures, speed & ease as regular ABS - with reduced warping. All ABS exhibits shrinkage, but this new filament warps less than common ABS filaments. -
eSUN ePA-12 Carbon Fiber reinforced filament We're proud to be the first to introduce Esun's latest Nylon 12 grade Carbon Reinforced filament in New Zealand. Esun ePA12+CF builds on esun's ePA12 formula by offering reduced moisture absorption, lower warping, greater stiffness, & improved layer adhesion. This improved printability on a larger range of 3d printers & allows larger Nylon 12 objects to be printed than earlier. Most other filaments are Nylon PA6. Our Nylon PA12 opens up possibilities that PA6 might not be capable enough to handle. Nylon PA12 far less moisture absorption making PA12 CF more suited to use in close aqueous or wet conditions even in contact with water. PA6 can get soft if it left in water for very long. Nylon 12 also handles much hotter temperatures, is much stiffer than Nylon 6, & even stronger - better than Nylon 6/6 as well. Nylon 12 also has excellent anti static properties. It is also UL94 V2 Flame Retardant for a continuous running temp of 120C making it perfect for electronics housings. Please be aware that Carbon Fiber however is slightly conductive, so if you need insulative properties, then the Glass Fiber Reinforced Nylon Filament will be a better choice. This is a 1Kg reel of 1.75mm filament. Carbon Fiber filament is matte Black in colour. -
Sale!
Pet-GÂ is very good functional material & its easier to work with than Abs. It is the same food safe PET thats used in water bottles etc It does not shrink or warp as easily as Abs does, & thus provides good dimensional accuracy for beginners who want to move up from PLA+. It provides excellent finish, high tensile strength, & has a high Glass Transition Temperature of 80 deg C. It is highly recommended for those who want high temperature & high strength properties compared to PLA. Esun PETg 1Kg 1.75mm SOLID GREY For recommended settings on how to 3D Print PETg & TGlase please read our FAQ here -
Sale!
Pet-GÂ is very good functional material & its easier to work with than Abs. It is the same food safe PET thats used in water bottles etc It does not shrink or warp as easily as Abs does, & thus provides good dimensional accuracy for beginners who want to move up from PLA+. It provides excellent finish, high tensile strength, & has a higher Glass Transition Temperature of 70 deg C. It is highly recommended for those who want high temperature & high strength properties compared to PLA. Esun PetG 1.75mm 1Kg RED is a solid, bright red colour, not translucent. For recommended settings on how to 3D Print PETg & TGlase please read our FAQ here -
Sale!
Esun PETg Filament 1kg Black PetG+ is a very good functional material & its easier to work with than ABS. It is the same food safe PET thats used in water bottles etc It does not shrink or warp as easily as Abs does, & thus provides good dimensional accuracy for beginners who want to move up from PLA+. If you are going to be using a high speed 3d printer like Bambulab, or 3d printing with a higher flow rate (such as using larger nozzles), we highly recommend using the our new PETG+HS, a high speed, low stringing PETg formulation designed specifically for high output printing. It provides excellent finish, high tensile strength, & has a high temperature Glass Transition Temperature of 80 deg C. It is highly recommended for those who want high temperature & high strength properties compared to PLA. Esun PetG 1Kg 1.75mm SOLID BLACK
