3D Printer Shop

Home » 3D Printer Shop

NZ’s Biggest range of everything 3D Printing

We’ve got new items coming in, & specials running on selected products frequently.

Check out all the new Resins we stock – Monocure Australia, Phrozen high speed 3d printing resins all at superb Prices too!
The worlds strongest Nylon HT Filaments now available. There’s also advanced PEI materials on offer.
To explore everything we have on special, please click here or on SALE link in the menu.

t&cs apply.

  • Vacuum Former

    Vacuum Former (2)

  • 3D Print Service

    3D Print Service (5)

  • 3d printer repair service NZ

    3d printer repair service NZ (3)

  • Brands

    Brands (141)

  • 3D Printing Resin

    3D Printing Resin (32)

  • 3D Printers

    3D Printers (26)

  • 3D Printer Parts & Accessories

    3D Printer Parts & Accessories (73)

  • 3D Printing Bundles

    3D Printing Bundles (5)

  • 3D Printing Filament

    3D Printing Filament (47)

  • 3D Scanners

    3D Scanners (1)

  • Deli Glue Stick PVA 36g 7103
    View Cart
    Add to cart / Details

    Deli Glue Stick for 3D Printing – Improve Adhesion Reduce Warping

    $5.00 +gst
    Deli is an affordable versatile glue stick that works really well on all bed surfaces for all 3d printers. PLA, ABS, ASA, Nylon, HIPS etc will benefit from glue particularly on glass beds. You will need glue when 3d printing with Nylon, Carbon Fibre, PolyPropylene, & other Engineering materials that don't like to stick to other surfaces. Applying glue greatly reduces warping from all materials. You can start with this cheapest glue stick, & then move to get more specialised glue sticks from our collection of bed prep adhesives. Just apply a thin layer of this glue on a warm build surface, & print directly on it. Please take care that if printing directly on glass beds then some materials can crack the bed when taking it off after using glue. We recommend you buy a PEI sheet first rather than directly on glass or ceramic. This is a PVA based glue that easily wipes off with a damp cloth. Reapply only as needed. Less is more with Glue when used for 3d printing. 36g glue stick
  • DX 3D Printer Door Hinge New Zealand
    View Cart
    Add to cart / Details

    Creatbot Door Hinge

    $5.00 +gst
    Hinges used for many Creatbot 3D Printers. Fits newer version of Creatbot DX, DE & also some versions of F160. Used with the clear plastic panels used on doors. 1 piece. Please buy as many as you need. Standard 40mm hinge that can work for many other applications.
  • Wanhao i3 3d printer idler pulley
    View Cart
    Add to cart / Details

    Wanhao i3 Idler Pulley

    $7.00 +gst
    Pulley for the belt rail system on Wanhao i3 & similar 3d printers. Will work on i3 plus as well new i3 plus mark 2. Is also compatible with many other 3d printers, but please check to be sure.
  • 3d printing paper painters tape nz
    View Cart
    Add to cart / Details

    Paper Painters Tape – Best 3D Printing Build Surface

    $10.00 +gst

    Painter Paper Tape - Good quality specially sourced for NZ conditions

    The secret to excellent 3d printing is that the first layer of your part should stick perfectly to your bed. But with so much confusion around what is best, from hair sprays to abs slurries, what really works well? ANd there are so many rolls of paper tape too, which one should you get? We've done a lot of testing, looked at branded as well as OEMs, & finally selected this one. Start with a roll of this tape. It is the most versatile 3d printing bed material & can be used with PLA, ABS, PETG, NinjaFLex, Poly Carbonate, Metal fills & even Carbon fibre. It also helps with levelling beds when metal beds slowly start to warp. Its easy to discount something so cheap, but try it & you will be impressed.. This inexpensive tape will last a long time & is easy to replace.
  • Plastic Cutter Pliers NZ
    View Cart
    Add to cart / Details

    Cutting & Finishing Pliers

    $10.00 +gst

    Best Tool for 3D Print Cleanups

    These are jewellery grade snipping cutters. Great product for a top price - now in NZ, dont pay upto 200% more.. They are great to remove tiny bits of plastic or some support material without hurting yourself. This humble tool might look like any ordinary cutter, but its much more! The blades sharpened edges are at a horizontal angle & designed to cut close to the part surface. The spring loaded handles allow for careful & controlled cutting. The thin tip allows cleanup in harder to reach places. It is also excellent to cleanup the nozzle without hurting yourself. Try this excellent tool out - you will be impressed! Please note the colour is random, it can be either Red, Blue, Yellow, Orange.
  • Placeholder
    View Cart
    Add to cart / Details

    Buy 3D Print Service NZ

    $10.00 +gst
    Dear 3D print service customers, After you receive the confirmed 3D Print cost from us, please use this to place an order equal to the cost we agreed on. For eg, if the cost is $50, please select quantity of 5, so the total will be $50. We realise this is not an ideal system & are working to make it better. Thank you for your co-operation until then.
  • Wanhao i3 3d printer Extruder Bearing
    View Cart
    Add to cart / Details

    Wanhao i3 Extruder bearing

    $10.00 +gst
    Linear Bearing with outer plastic cover & mount holes. Fit the extruder rail assembly on Wanhao i3 & similar 3d printers. Can also be used as platform bearings. Will work on i3 plus as well new i3 plus mark 2. Is also compatible with many other 3d printers, but please check to be sure.
  • Generic Image Placeholder
    View Cart
    Add to cart / Details

    FlashForge Filament Guide Tube

    $10.00 +gst
    Suitable for FlashForge 3D Printers including Adventurer , Finder, Inventor, Guider & similar 3d printers.
  • FlashForge Adventurer 3 3D Printer Extruder Board New Zealand
    View Cart
    Add to cart / Details

    Extruder Board for FlashForge Adventurer 3D Printer

    $10.00 +gst
    Extruder Circuit Board for FlashForge Adventurer 3 3D Printers
  • Generic Image Placeholder
    View Cart
    Add to cart / Details

    Creatbot aluminum Door handles

    $10.00 +gst
    Genuine Creatbot door handles. These are the slim thin silver coloured aluminum door handles on newer Creatbot 3d printers with hinged doors. They are the smaller size (approx 80mm long), which are used for DX, DE, F160. They are also used on the rear chamber doors of the F430. These are attached to the Acrylic doors on the D series, & corresponding door frames on F series machines.
  • Generic Image Placeholder
    View Cart
    Add to cart / Details

    Wanhao i3 mk2 Magnetic Metal Mat Lower Sheet

    $15.00 +gst
    Genuine Wanhao Branded lower metal sheet to be stuck on the printer platform, on which you can then use magnetic mats & magnetic sensors. This is used on Wanhao i3 Mk2 (also called i3 v2) 3d printers, the new version of D5s, & other such machines. This is not the actual print surface, its the metal sheet on which the build surface sticks magnetically. For older version of the i3 please buy the other BuildTak style bed mat which has glue on one side. Works extremely well for most materials like PLA, ABS & PETG.
  • Flashforge Creator Pro 2 IDEX Nozzle
    View Cart
    Add to cart / Details

    FlashForge Guider Nozzle 0.4mm

    $15.00 +gst
    Genuine FlashForge nozzle for the FlashForge Guider 2S 3D Printer. It is common for nozzles to wear or block after a period of use, & need replacing. Simply unscrew the existing nozzle & screw the new one on, easy. Please remember to always heat your hot end before removing your nozzle.
  • Phrozen LCD Frame Tape Box
    View Cart
    Add to cart / Details

    Phrozen LCD Frame Tape 9.3″

    $16.00 +gst
    This pre-cut and molded tape simplifies the installation of your LCD screen. No need to cut the tape—just place it and secure your screen with ease. Tips:
    • Use this LCD frame sticker tape to secure your printer's LCD screen after replacement.
    • The tape is single-use; confirm its position before applying.
    • Press down evenly when applying the tape to avoid creases.
    • After installation, perform a Z-axis calibration test.
  • Generic Image Placeholder
    View Cart
    Add to cart / Details

    Magnetic Bed Level Sensor Probe for 3D Printers

    $19.00 +gst
    This is an inductive sensor for 3d printers like Wanhao i3 plus mk2, D6, & D9. It will suit most other 3d printers that use magnetic proximity sensors for bed levelling. Or for any other applications where a magnetic sensor is used for proximity, detection, limit switching etc.
  • Wanhao Head mini board nz
    View Cart
    Add to cart / Details

    Head Miniboard for Wanhao 3d printers

    $19.00 +gst
    Head board for 3d printers like Wanhao i3 plus mk2, D6, D9, D9 mk2 etc. This is the little PCB that sits on top of the main head where you plug in the heater, temp sensors, etc.
  • Creatbot 6032 high current stepper driver
    View Cart
    Select options This product has multiple variants. The options may be chosen on the product page / Details

    Creatbot XYZ Stepper Driver

    $19.00 +gst
    These are the drivers used to drive the stepper motors on Creatbot 3d printers. They are used for the X Y Z axi motors as well as for the Extruder motors. Different drivers have been used for the X Y axi as well as for the Z & E1 / E2. Please choose the correct model number. If the model you have is not listed, please contact us & we will set it up for you.
  • Phrozen LCD Frame Tape 10 Inch Package
    View Cart
    Add to cart / Details

    Phrozen LCD Frame Tape 10″

    $19.00 +gst
    This pre-cut and molded tape simplifies the installation of your LCD screen. No need to cut the tape—just place it and secure your screen with ease. Tips:
    • Use this LCD frame sticker tape to secure your printer's LCD screen after replacement.
    • The tape is single-use; confirm its position before applying.
    • Press down evenly when applying the tape to avoid creases.
    • After installation, perform a Z-axis calibration test.
  • Generic Image Placeholder
    View Cart
    Add to cart / Details

    Wanhao i3 thermister temperature sensor for head or bed

    $20.00 +gst
    This is a temperature sensing thermister for Wanhao i3 3d printers. The thermisters for bed & nozzle are the same, however the wire length is slightly different. Please specify if you want one for the head, or for the nozzle. Please also specify which wanhao i3 3d printer type it is for: i3, i3 v2, i3 plus, i3 plus mk2, or i3 mini.    
  • 3d printer mk8 nozzle
    View Cart
    Select options This product has multiple variants. The options may be chosen on the product page / Details

    Creatbot F series Mk8 machined brass nozzle

    $20.00 +gst
    Genuine Creatbot brass nozzle for 1.75mm 3d printers. Will suit all Mk8 head 3d printers including all the Creatbot F series 3D Printers we sell: Creatbot F160, F160 PEEK, F430, F430 PEEK edition, PEEK-300, & D600 Pro 3d printers Our nozzles are individually Machined (not die casted & pressed like cheaper nozzles). The internal orifice & crucible shape of the nozzle is carefully manufactured, meaning you get less jams & clean flow without ripples. They will out last most cheaper nozzles on the market, & provide more consistent & reliable feeding as the diameter is accurate. These nozzles will work fine with all Mk8 thread extruder hot ends. So no matter your 3d printer, try out a higher quality nozzle that causes less problems & needs less changing. We stock a wide range of nozzle diameters 0.2, 0.3, 0.4, 0.6, 0.8 & 1mm. Please choose your size from the dropdown. We also sell Stainless Steel & hardened Martensitic steel nozzles which are superior to brass nozzles as they last longer. We recommend martensitic nozzles for Carbon Fiber 3d printing. And in general, Stainelss steel nozzles are better than brass even for general purpose 3d printing including using with Wood PLA.
  • Cartridge Heater Long Wire for 3D Printer NZ
    View Cart
    Add to cart / Details

    Creatbot D Printers Head Cartridge Heater

    $20.00 +gst
    Standard Tube Cartridge Heater that slots inside the hot block. Has long wire leads. Suitable for all Creatbot D series 3d printers including DX , DX Plus, DE , DE Plus for all single, dual or triple head models.
  • Generic Image Placeholder
    View Cart
    Add to cart / Details

    Creatbot F Printers Head Cartridge Heater

    $20.00 +gst
    Suitable for all Creatbot F series 3d printers including F430, F160, & their PEEK edition 3d printers. Standard Tube Cartridge Heater that slots inside the hot block. Has a small connector to plug on the board.
  • Creatbot D series 3d printer Throat Tube Heat Brake part new zealand
    View Cart
    Add to cart / Details

    Creatbot D series 3D Printer Throat Tube Heat Brake

    $20.00 +gst
    Genuine Creatbot Throat Tube which connects onto the heat sink on top & the nozzle goes at the bottom. If you have replaced nozzles & still find there are extrusion issues, please consider changing this part. This tube is considered part of the heat break mechanisk, & has a partial teflon coating on the top to aim smooth extrusion. So it is recommend you change this tube as needed for the best uniformity in extrusion as well as reduction of jams or blockages particular in longer 3d prints. Will suit all Creatbot D series 3D Printers we sell including DM, DX, DE, the Plus versions, & the older D600 3mm machines  
  • Creatbot teflon hot end heat break tube
    View Cart
    Add to cart / Details

    Creatbot F series 1.75mm Teflon lined Heat Brake Tube

    $20.00 +gst
    Genuine Creatbot Throat Tube which connects the hot block into the extruder mechanism. This is the teflon tube lined version which makes it easy to print PLA, PETg etc thanks to the teflon liner. But it will only operate up to 260C, please do not print hotter than that else you will damage the teflon liner. The heat sink & the nozzle is attached at the bottom of this piece. If you have replaced nozzles & still find there are extrusion issues, please consider changing this part. This tube is considered part of the heat break mechanisk, & has a partial teflon coating on the top to aim smooth extrusion. So it is recommend you change this tube as needed for the best uniformity in extrusion as well as reduction of jams or blockages particular in longer 3d prints. Will suit all Creatbot D series 3D Printers we sell including F160, F160 PEEK, F430, F430 PEEK, D600 PRO (not the older D600)
  • Creatbot Hgh Temp Full metal hot end heat break nz
    View Cart
    Add to cart / Details

    Creatbot F series 1.75mm Full Metal Hotend Heat Brake Tube

    $20.00 +gst
    Genuine Creatbot Throat Tube which connects the hot block into the extruder mechanism. This is the Full Matal hot end which doesn't have a teflon liner inside, allowing you to easily print Carbon Fiber as well as high temp materials up to 450C. If you are new to 3d printing, you might find it useful to start with the other Teflon lined heat brake version as it can be easier to print common materials like PLA & ABS with that one. The heat sink & the nozzle is attached at the bottom of this piece. If you have replaced nozzles & still find there are extrusion issues, please consider changing this part. This tube is considered part of the heat break mechanisk, & has a partial teflon coating on the top to aim smooth extrusion. So it is recommend you change this tube as needed for the best uniformity in extrusion as well as reduction of jams or blockages particular in longer 3d prints. Will suit all Creatbot D series 3D Printers we sell including F160, F160 PEEK, F430, F430 PEEK, D600 PRO (not the older D600)
  • Flashforge Creator Pro 2 IDEX Nozzle
    View Cart
    Add to cart / Details

    FlashForge Creator Pro 2 Nozzle 0.4mm

    $20.00 +gst
    This is a Genuine FlashForge brand nozzle for FlashForge Creator Pro 2 IDEX 3D Printers. It is common for nozzles to wear or block after a period of use, & need replacing. Simply unscrew the existing nozzle & screw the new one on, easy. Please remember to always heat your hot end before removing your nozzle.
  • Build tak bed mat sheet sticks onto metal 3d printer beds
    View Cart
    Add to cart / Details

    Flashforge Creator 3 Upper Mat sticker for flex steel build plate

    $20.00 +gst
    This is the mat that sticks onto the spring steel build plate, which adheres on the magnetic 3D Printer bed of 3d printers like FlashForge Creator 3, 3 Pro & 3 Pro v2 . It can also be used on any 3d printer that has a 300x250mm build volume & you want a good quality surface mat. This item is only the top build tak style mat, that you can 3d print on. The photo is to show you how the mat is to be used in relation to a Creator series 3d printer. This is a sticker, it has glue on 1 side, just peel it & stick it onto any surface. It is a Polycarbonate re-inforced build surface that provides excellent adhesion to most common materials. However, for Nylon based materials, it will be best to put a thin layer of the glue stick on it. Some Flashforge mats are blue, & some are black - they are exactly the same mat, flashforge just changed colours between the machine releases.
  • Martensitic Steel Nozzle 3D Printers
    View Cart
    Select options This product has multiple variants. The options may be chosen on the product page / Details

    FlashForge Creator 3 Pro Hardened Steel Nozzle

    $20.00 +gst
    This is a Genuine FlashForge brand Hardened steel nozzle suitable to 3d print Carbon Fiber filaments as well as higher temperature materials. These hard nozzles are suitable for FlashForge Creator 3 PRO & Creator 4 series 3d printers. They will not fit the Creator 3 V2 or older Creator 3 machines with the long 1 piece nozzle type. 0.6mm nozzle diameter is recommended for Carbon Fiber, Glass, & Wood based filaments as it reduces chances of blockages & under-extrusion over longer prints. These nozzles also double or triple your effective throughput, thereby allowing your 3d prints to be completed much faster, usually 2 to 3 times faster! Hardened nozzles are the best type that do every kind of 3d printing really well. Simply unscrew the existing nozzle & screw the new one on, easy. Please remember to always heat your hot end before removing your nozzle. Please choose your size, else we will send a 0.4mm by default.
  • LCD Screen protector for Resin 3d printers
    View Cart
    Select options This product has multiple variants. The options may be chosen on the product page / Details

    Phrozen LCD Screen Protector 10″-15″

    $22.00 – $35.00 +gst
    Phrozen screen protector is made of durable and high-transparency material to protect your LCD screen from the risk of resin spilling & damaging your LCD screen. This works beautifully without affecting your prints. Just relevel your bed after you stick it on the lcd screen of your resin 3d printer & you are good to go.
  • Sale!
    esun pla+ yellow nz
    View Cart
    Add to cart / Details

    PLA-Lite 1.75mm 1Kg eSun Yellow

    Original price was: $26.99.Current price is: $24.99. +gst

    eSUN PLA Lite 1Kg Yellow 3D Printer Filament now in NZ

    Do you want to 3D Print with PLA & still want higher flexibility, impact strength & easy to remove supports? Please welcome the new eSUN PLA lite! As easy to print as PLA & yet highly functional. Our range of eSun PLA colours is growing everyday. This is the eSun Classic Yellow - nice and bright. ESun offer a very accurate & well respected PLA 3d printing filament that has taken the world by storm. PLA is naturally sourced, compostible & bio-degradable. It is the easiest material to 3d print. In the past, if you wanted functionality (but didn't need high temperature resistance), you still had to use other alternatives like PetG / ABS which were harder to work with. Now you can 3d print with the ease of PLA while getting many functional advantages & yet be eco-friendly thanks to eSun PLA lite! We are Authorised Reseller of eSun & our PLA 3d printer filament is stocked right here in NZ so we can bring our kiwi 3d customers great quality BRANDED pla filament for a superb price. A quick note about printing eSun PLA - In our experience it works best slightly hotter than standard PLA. For eg, if you print PLA between 190-200C usually (like we do), then its recommended you go to 210-220C for PLA lite. Of course there are a lot of factors around 3d printing extruder temperature, but start at 210C & see how you.
  • Generic Image Placeholder
    View Cart
    Add to cart / Details

    Creatbot D series 3D Printer Thermocouple Temperature Sensor

    $25.00 +gst
    This is a temperature sensing Thermocouple for Creatbot D series 3d printers. They will fit all Creatbot DX & DE machines bought since 2015.  
  • Creatbot F160 buildtak bed mat
    View Cart
    Add to cart / Details

    Creatbot F160 BuildTak Bed Mat

    $25.00 +gst
    Buildtak style Bed Mat designed for the Creatbot F160 & F160 PEEK 3d printer. This is a simple, easy to apply stick on mat that sticks on the bed of the 3d printer. It can even stick on an existing buildtak. Just peel the bottom & use like a sticker. Great adhesion for common materials like PLA, ABS, PETg, TPU. For a high wearing setup you can buy our matching Carbon Fibre Metal Plate to setup a removable bed system.
  • Generic Image Placeholder
    View Cart
    Add to cart / Details

    Creatbot F series 3D Printer Thermocouple Temperature Sensor

    $25.00 +gst
    This is a temperature sensing Thermocouple for Creatbot F series 3d printers. They will fit all Creatbot F430 & F160 3d printers.