- Molded tank allows for cheap replacements and extras for switching out resin on the fly
- Fibreglass reinforced plastic sports increased durability and resistance to corrosion and resin.
- It is equipped with a rubber seal to ensure that the vat is water-tight to help avoid resin leaks.
- E10 Vat Max Volume 1500mL without build platform and 700mL with build platform
-
Genuine E10 resin tray molded using non corrosive plastic. This vat fits all EPAX E10 series 3D printers. Works with the original 8.9" screen E10 as well the new 10.1" E10 5K 3d printers. Each vat comes with a sheet of nFEP film already installed, ready to use. Just remove the old tray out & slide the new one in. Thats it, easy installation.
-
Esun Pure PolyCarbonate Filament from 3D Printer Store
Poly-Carbonate commonly referred to as just PC, is one of the most capable Functional Polymers in the world. PC is the King of cost-effective engineering thermoplastics thanks to High Temperature resistance, UV stability & Flame Retarding. Flame retardant level: UL94：V2 Pure PC handles a whooping 140C continuous operating temperature - only to be beaten by PEI / PEEK Print temperature range: 240-280℃; Black PolyCarbonate Esun Filament 0.5Kg in 1.75mm ABS will only handle 85C in most continuous high temperature applications. You can boil water in pure PC but you can't in ABS or any blended PC-ABS. Pure PC is thus food safe & common in food containers. -
This is a Carbon Fibre reinforced spring steel sheet designed for the Creatbot F160 & F160 PEEK 3d printer Bed. It allows you to setup an easy removable build plate system by 3d printing on this plate, or attaching your chosen build surface onto this plate. Check out our matching Creatbot F160 Build Tak Bed Mat for a sleek & easy solution. This is a high wear resistant 3d printing surface that can provide good adhesion for PEEK & PEI or other advanced polymers, with appropriate surface glues. Ideal for those who 3d print with such materials extensively. You can print directly on Carbon Fibre plates with any material including PLA, but you must apply a little bit of Glue stick on this plate first. You can also buy our 200x200mm PEI sheet which are perfect to stick on this metal plate.
-
This is the small PCB that goes behind the extruders of a Creatbot F430 head. The main ribbon cable connects to it from the motherboard underneath the machine. And other connectors such as the temp sensors, cartridge heaters, probe etc plug into this little board.
-
This is the USB reader board used on a Creatbot F430 & F160 3d printer. This is the Latest version board with an adapter to allow certain older printer models to also be able to use it.
-
Phrozen High Heat Functional Resin - now in 5Kg Jugs
Excellent for 3D Prints with high precision & high temperature resistance up to 95 deg C! Tougher than most common resins on the market, for a very affordable price thanks to the large 5kg cans. EASY POST-PROCESSING: Coloring, drilling and grinding are all suitable. A great choice for vulcanized rubber molding process, such as jewelry casting, GK kit, and all other high-heat applications, thanks to high temperature resistance and hardness. Perfect for vacuum forming. And very good for orthodontic use in thermoforming aligner & retainer templates. Low viscosity, allows for high speed printing. Weight 1Kg Grey Colour -
Sale!Introducing Carbon ABS filament, a versatile 3D printing material designed to elevate your projects to new heights. This product boasts an impressive set of properties that make it a top choice for various applications. With its lightweight composition, Carbon ABS offers excellent impact resistance while maintaining ease of handling. Furthermore, its superior UV stability trumps traditional ABS, ensuring your creations maintain their vibrant appearance over time. One of the standout characteristics of Carbon ABS is its low moisture absorption rate, making it an ideal choice for projects where exposure to humidity may be a concern. Additionally, its exceptional strength-to-weight ratio surpasses that of nylon, providing you with a filament that can withstand demanding conditions without compromising on quality. One of the most noteworthy features of our Carbon ABS filament is its inclusion of carbon fibers, which effectively prevent warping issues commonly associated with ABS prints. As a result, you can now achieve precise and accurate prints without any significant deformations. The versatility of Carbon ABS goes beyond its mechanical properties. It finds particular suitability in automotive applications, thanks to its ability to withstand rugged conditions. Whether you're creating customized car parts or accessories, Carbon ABS ensures durability and reliability. Moreover, its lightweight composition makes it an excellent choice for drone enthusiasts seeking to improve the performance of their aerial companions. This package of Carbon ABS filament weighs 500g, providing you with ample material to bring your innovative ideas to life. Upgrade your 3D printing experience today with our exceptional Carbon ABS filament.
-
3D4Makers C8 3D Printing Filament 1.75mm 750g
Facilanâ„¢ C8 is a type of filament specifically designed for 3D printing. It is known for its excellent printability and high strength properties compared to traditional PLA (Polylactic Acid) filament. One notable advantage of Facilanâ„¢ C8 is its ability to print without visible layers. This means that the printed object will have a smooth and seamless appearance, devoid of any visible lines or layers that are typically seen with other filament types. This makes Facilanâ„¢ C8 ideal for printing objects that require a high level of aesthetic finish. In addition to its superior surface finish, Facilanâ„¢ C8 also possesses enhanced strength properties compared to PLA. The filament has good dimensional stability, which means that the printed objects are less prone to warping or shrinking during the printing process. This allows for greater structural integrity and accuracy in the printed parts. -
RESINAWAY® is a powerful cleaning agent designed specifically for removing uncured resin from printed objects. With its concentrated formula, it is recommended to use the product as is without diluting it with water. For optimal results, it is suggested to use RESINAWAY® in conjunction with an ultrasonic cleaning bath, although it can also be used with a soft brush if an ultrasonic bath is not available. To use RESINAWAY®, simply submerge the printed object in the cleaning agent until all traces of uncured resin are completely removed. Once clear of resin, the object should be removed from the solution, and any remaining liquid can be removed by either using compressed air or patting it dry with a lint-free cloth. To ensure the best finish, the part should then be post-cured using a recommended LED 405nm light until the surface becomes tack-free, which typically takes around 5 minutes at 30 watts. Finally, the part should be rinsed under running tap water. In addition to cleaning printed objects, RESINAWAY® can also be used to clean vats, build plates, instruments, and surfaces. For these applications, it is suitable to rinse, soak, or wipe with RESINAWAY®, followed by washing with fresh water. Overall, RESINAWAY® offers a convenient and effective solution for safely and efficiently removing uncured resin from printed objects and related equipment, ensuring professional and high-quality results.
-
This is a temperature sensor for the newer FlashForge Creator Pro 2 & Creator 3 Pro 3d printers. It is a threaded type that fits into the hot end block. This is not for older flashforge Creator series printers.
-
Phrozen Sonic MEGA 8K S 15" High Speed 3D Printing Package
The World's Fastest 8K LCD Resin 3D Printer is available as a complete package deal. With a matching Wash & Cure System as well as Automatic Resin feeding pump add-on. This is the most comprehensive resin 3d printing package ever released for a high speed desktop 3d printing system. We are proud to have it right here in New Zealand. Your entire workflow from print preparation to final model in the hand can now be taken care of on your desk. With a print speed of 600 layers per hour, the Mega 8K S is the fastest total output LCD resin 3d printer on the market. The Mega 8K S boasts a massive build volume of 330mm x 185mm x 300mm. And its 15" 8K mono LCD screen offers 43 micron XY resolution. So you can build large parts without compromising detail. We are the Exclusive Certified Reseller of Phrozen products in New Zealand. We provide local support & genuine warranty. Buy from us & get access to genuine spare parts locally. The Mega 8k S series revolutionises production 3d printing & enables you to make parts that can be sold directly to customers at a throughput speed which makes it economically viable to do so. No more waiting days for a large 3d prints or for a large batch of small products. The overall productivity of a Mega 8K S is comparable to approx 20 times a common FDM 3d printer of the same price in terms of output speed - & that too with injection moulding part quality. Happy High Speed 3D Printing! -
Kevlar is inherently flame resistant, protecting against thermal hazards up to 420 deg C. Additionally, Kevlar® fibers won’t melt, drip or support combustion. Once popular in bullet proof vests, DuPont's kevlar is today available as an additive in advanced 3d printing filaments. The addition of Kevlar reduces the warping tendency of ABS making it much easier to 3d print. It has the highest strength to weight ratio in the class of non-crystalline materials. Made by 3D4Makers in Netherlands. We're proud to be the first company to bring 3d printable kevlar filament for FDM 3d printers into the Australia New Zealand region. 500g roll 1.75mm Black Colour matted finish thanks to the Kevlar fibers. Can be 3d printed with 0.4mm hardened nozzles, though 0.6mm would be better. Processing temperature range same as standard ABS filaments ~ 260C making it very accessible to use with a vast range of fdm 3d printers on the market.
-
This motor is used in the Creatbot F430 3d printer. It is the X axi motor that connects on the linear rail to move the head left to right. This is the motor only, not the fan/heatsink. Please remember to put the heatsink & fan from your old motor onto the new motor.
-
This package includes our #1 selling F430 advanced 3d printer with a selection of common filaments, advanced materials & recommended accessories. If you are looking to further your 3d printing using ultra performance materials, this bundle has everything you need to get started. You'll still get the Free Training & Delivery too. Buying this bundle will save you $400! Choose $800 worth of any items, you're getting them HALF PRICE. Here are some popular items we suggest you to consider from: PLA filament (super easy versatile filament, a must have) Petg filament (easy yet capable, handles 65C & is a dense non-brittle material) Carbon Fiber reinforced PETg filament (easy to print, good stiffness, handles 85C with low moisture uptake) ABS reinforced Carbon Fiber Filament (best light weight filament that offers impact resistance, 120C temp, & light weight parts) ESD safe ABS (excellent for electronic components that may be near magnetic fields) Nylon PA filament (great for bushes & places with lubrication or chemicals) Polycarbonate Filament (excellent heat resistance, impact resistance, & flexibility) PEKK ultra performance filament (as good as PEEK yet easier to print on F430) Martensitic & Stainless nozzles, heat brake tubes Hot end parts like temp sensors & heaters Garolite bed sheet & glues (a great build surface for the F430, & a good glue helps with printing Nylons) Choose any filaments & items worth $800. Here are some common filaments that make a good bundle: Want a package customised to your specific needs? No problem, we can make a package deal that suits your needs. Please contact us & we'll make a discounted package just for you.
-
3D4Makers PEI ULTEMâ„¢ 1010
Polyether Imide (PEI) Ultem 1010 is an amorphous thermoplastic with a glass transition temperature (Tg) of 217 °C. It has a continuous operating temperature of up to 170 °C. This inherently flame retardant plastic has UL94 V0 and 5VA ratings. It is dark amber & slightly translucent. We source our ultra performance filaments very carefully, as they are expensive, & we want you to have the best experience with them. We selected 3D4Makers ultra Filament that's Made in Netherlands to tight tolerances & offers easier printability than other ultra performance filaments on the market. Good printability leads to excellent layer adhesion & this greatly improves the impact resistance, strength & durability of this PEI 1010 filament over that of others. Their products are consistent batch to batch, unlike some others we have tested. Our ultra Performance 3D Printing filaments are ready to ship right here in NZ. PEI Ultem attributes include:- Inherent flame resistance with low smoke evolution and low smoke toxicity
- Long-term hydrolytic stability
- Excellent dimensional stability (low creep sensitivity and low, uniform coefficient of thermal expansion) and highly reproducible part-to-part dimensions
- Exceptional strength and modulus, even at elevated temperatures
- Good resistance to a broad range of chemicals, such as automotive fluids, fully halogenated hydrocarbons, alcohols, and aqueous solutions
- Stable dielectric constant and dissipation factor over a wide range of temperatures and frequencies
-
This is a sample 3d print made using our High Temp Resin that has a HDT (Heat Defection Temperature) of 190C & Tg (Glass Transition Temperature) of 220C. Please send us your stl file first to ensure this will be suitable to make.
-
NZ's Best Entry Level Resin 3D Printer Bundle
3D Print parts bigger than common consumer grade machines, & Cure them for optimum strength. This bundle includes : Ultrasonic Cleaner FlashForge FC3 Heated Curer Ultrasonic Cutting Knife -
Phrozen makes the best Entry Level, Easy to Use, & Extremely Versatile Dental 3D Printers in the market out of all the brands we have assessed. If you want to enter Digital Dentistry on a low budget, but still want to have pre-calibrated profiles for common materials & applications, then the new 2022 Phrozen Sonic platform is your best choice. While LCD powered 3d printers may not be the fastest or the best when compared to our Professional DLP based dental 3d system like the Desktop Health's EnvisionTec 3D Printers, what these Phrozen's do have is a very low price point of entry that still doesn't require experimentation like you otherwise would with cheaper non-dental resin 3d pritners on the market. The Phrozen Sonic 4K also comes in a larger XL which we sell, & is perfect for orthodontics, to be able to print more of the larger models like Full Archs in 1 go. Please contact us today & lets see which dental 3d printer is right for your practice. Contact us today & we can talk more about whether
-
Phrozen Cure MEGA - UV 3D Print Cure Lamp
Large 3d prints need proper curing. The Phrozen Mega Curer comes with 40 X 40 X 45cm mega chamber size designed to complement 15" LCD 3d printers like the Phrozen Mega 8K. With 405nm UV lights and a 360-degree rotating stand, Phrozen Cure Mega cures large prints or multiple smaller-sized models reliably, regardless of size. Without proper curing, prints can easily fail. Don’t let your models fail at this crucial stage. Cure your models in the chamber and with a click of a button, your models will be properly cured. This is a Back Order special. Buy now, Save a Lot. Includes a timer system for compatibility with all your resins. Works fine with 3d prints made by all popular resin 3d printers on the market. And the Perfect match for our large Phrozen Mega 8K Resin 3d printer There are myths around curing with sunlight. Though sunlight has UV in it, there is very less intensity of 405nm wavelenth UV that is needed to cure 3d prints. Enough UV to give you a sun burn, sure. But to cure a 3d print - not really. The correct UV wavelength is able to penetrate part surface, sunlight can not. Sunlight will also heat up your model much more than the UV you would get to polymerise the liquid. Curing in the sun heats up models unevenly, & causes distortion. A curer rotates as it exposes UV, thereby raising the part temperature evenly. This improves the interlayer adhesion & creates strong components that exhibit the qualities the resin makers expected you to achieve. A poorly cured part is not a safe practise - you don't want these monomers floating everywhere long term. Curing 3d printed parts correctly, is important so that things are not contaminated. And people are safe to touch them. -
Full Swappable Extruder Head for the new FlashForge Creator 4 3D Printer. 3 Extruder options available: HS Extruder = High Temp 360C Extruder including Carbon Fiber filled materials. HT Extruder = upto 320C temp for common plastics including PLA/ABS. F Extruder = Specialist flexible filament extruder for high flex TPU TPE & similar materials. Please specify which head you want on the order notes.
-
Genuine FlashForge nozzle for the FlashForge Guider 2S 3D Printer. It is common for nozzles to wear or block after a period of use, & need replacing. Simply unscrew the existing nozzle & screw the new one on, easy. Please remember to always heat your hot end before removing your nozzle.
-
Head board for 3d printers like Wanhao i3 plus mk2, D6, D9, D9 mk2 etc. This is the little PCB that sits on top of the main head where you plug in the heater, temp sensors, etc.
-
Genuine Wanhao Branded lower metal sheet to be stuck on the printer platform, on which you can then use magnetic mats & magnetic sensors. This is used on Wanhao i3 Mk2 (also called i3 v2) 3d printers, the new version of D5s, & other such machines. This is not the actual print surface, its the metal sheet on which the build surface sticks magnetically. For older version of the i3 please buy the other BuildTak style bed mat which has glue on one side. Works extremely well for most materials like PLA, ABS & PETG.
-
The perfect Beginners 3D Printer & 3D Scanner combo - A First in New Zealand
The perfect bundle for schools & educators to offer a Full STEAM 3D Printing Curriculum into their classroom. Explore the full STEM Technology pathway with a package designed to give todays young minds access to all relevant design & innovation technology. This package includes 3 easy to use STEM items: 1) Our best selling entry level 3D Printer the superb Flash Forge Adventurer 3 2) The super compact & fun to use Canadian designed Matter Form V2 3D Scanner here. 3) The worlds easiest child-friendly Desktop Vacuum Former to make reusable moulds & food safe items. We even have options for full curriculum aligned STEM classroom deliver courses - please contact us for more options. Happy 3D Printing! -
3D Print your part with this PLA & then Etch / Engrave with your Laser Engraver This unique material is optimized to be used with laser engravers within a 980-1064 nm wavelength. The material has been tested successfully with a Nd:YAG- and  fiberlasers. Laser marking has various advantageous over conventional marking technologies: Bright White Colour - Markings are permanent, waterproof, wear and heat resistant, lightfast and resistant to chemicals. - Flexibility in marking design. - No pre or post-treatment required. Laser marking PLA will not work with CO2 lasers. Please welcome ColorFabb's unique Laser marking Filament all the way from Netherlands & ready to ship right from Auckland.
-
Extruder Circuit Board for FlashForge Adventurer 3 3D Printers
-
Copper Filament - High Density - Now in NZ Our Metal filled filaments are high density 3d printer filaments with around 20% pure metal powder in it. Please be careful of very cheap 'metal' filaments that usually have only 2% bronze inside cheap PLA material! Copper is a high density metal filament that even has some electrical conductivity! And you can use it for medals, trophies, commemorative emblems, or jewellery too. Our metal filaments can be 3d printed & then sanded to make the metal inside sparkle! Any 3d printer can 3d print metal filled materials but we recommend 0.6mm or larger nozzles with 02.mm (200 micron) or fatter layer height. Print slowly & at slightly higher temperatures than usual. Please read our FAQ Articles for more details on printing with filled materials.
-
Big Parts, High Accuracy, & Reliability - In ALL Filament Materials currently available. The Creatbot D600 Pro 2 is the latest version of the successful D600 commercial grade FDM 3D printer. It features Servo Controlled motors & closed loop feedback electronics, giving it the most precise head calibration of any similar sized large scale 3D Printer on the market. It has become common to see low cost large size 3d printers on the market. So why would you buy this one? Just doubling the size of every single part & giving you a large bed, doesn't lead to a successful print. With cheaper printers you will see them advertise a size like 500x500mm, but when you actually try to print a part that size, your builds will consistently fail. Multi-day prints will be composed of layer shifts in the XY direction, even a 0.1mm XY shift will land your part in the rubbish bin. This is why real commercial grade 3d printers are designed to be able to produce what the spec sheet actually has on it. And that is the reliability you need, so that you dont come back to a 3 day print only to throw it in the bin. Large 600mm x 600mm x 600mm actively convection heated build volume makes it possible to print large parts one piece with ease. And the servo control system doesn't cause stepper drivers to overheat, which is all too common in kit style large 3d printers. Suited to producing large yet highly accurate 3d models, the D600 has every professional grade feature you would expect. Contact us today to see how our leading edge Creatbot D600 2 could give you the edge in product development & manufacturing. Please see full specification details below. Free training is offered with our Creatbot D600. We will spend several hours with you to discuss any product specific requirements & help you get the best possible outcomes from these 3d printers. We will also help you implement the 3d printer into your workflow, so you can rely on a team right here in Auckland. We also offer Free Phone based support, not just email. All spare parts are stocked right here in Auckland & sent same day in most cases with overnight courier. So should you need a spare part, your 3d printer isn't sitting there costing you money. Its surprising how many 3d printer companies advertise machines but don't stock parts for when you need them the most. We are New Zealand's EXCLUSIVE Creatbot Partner. We are also authorised Creatbot suppiers for Australia. We are the only company in the regions to offer FREE TRAINING with these 3D Printers so that you fully supported after buying the 3D Printer & not left alone to figure things out. There is no extra charge for this support service. This is the commitment we have put into the New Zealand & Australian 3D Printing Market - We want you to succeed with 3D Printing, & in your success is our success. We aim to have the BEST PRICE & BEST SERVICE for Everything 3D Printing in NZ / AU. On top of our Free Training, we still Aim to be UNBEATEN on Price. So if you find the same product & a comparable service level anywhere world wide, please get in touch with us & we will usually be able to beat the competition.
-
Phrozen Sonic Mighty 14K REVO 3D Printer
Our beloved Mighty has the upgrade of a liftime. 14K LCD Heated Chamber Wifi, camera, Auto levelling, failure detection All the smarts you could possibly want in a medium sized resin 3d printer make the Phrozen 14K Revo the most sophisticated 3d printer on the market in this build volume. A truly Revolutionary 3D Printer. Build Volume 218Â x 123Â x 235 mm high Super High XY Resolution of only 16 microns. The intuitive design of Sonic Mighty makes it suitable for everyone including beginners. And with the Heated Chamber you can 3d print advanced materials beautifully. With a Monochrome LCD, you get a longer life screen as well as build speed thats up to 3 times faster than most other MSLA 3d printers on the market. Pair it with the new Phrozen Wash & Cure Kit for perfect resin 3d prints time & again. This machine is highly sought after & is currently being produced. We are air shipping them on a first come first served basis. Production just started in May, & presently there is around a 2 week wait time to get the units. Order now so you don't get stuck behind a queue that only seems to get longer.. Happy Resin 3D Printing! Full Tech Specs below: -
Magigoo HT adhesive is designed to provide bed adhesion with challenging materials like PEI Ultem, PEEK, PEKK, PPS, PSU, PPSUÂ etc. It can be used with all kinds of bed surfaces, however we recommend PEI or Garolite. It can also be used with Carbon Fiber reinforced filaments & Glass Filled materials, like PPS-CF, PEI-CF & PEEK-CF etc. To 3D Print Nylon, we recommend Magigoo PA as a first choice, & if that doesn't suit well for your particular filament, then try this Magigoo HT. For common materials like PLA, ABS etc, we recommend buying the Magigoo original glue. Magigoo glue reduces warping in FDM 3D printers. Warping is caused by the differential cooling of a print during a 3D printing process made up of layers. For printing advanced materials reliably, apply a thin layer of Magigoo on your print bed before printing. This will ensure a successful print. If too much glue has been lacquered on, please wipe with a damp sponge & then reapply glue.
-
Magigoo Original adhesive is designed to provide optimum bed adhesion with PLA, ABS, ASA, PETG & other common materials. It can be used with all kinds of bed surfaces, however we recommend PEI or Garolite. It can also be used with Carbon Fiber reinforced filaments & Glass Filled materials. To 3D Print Nylon, we recommend Magigoo PA. For higher temp filaments including PEI & PEEK, we also have Magigoo HT. Magigoo glue reduces warping in FDM 3D printers. Warping is caused by the differential cooling of a print during a 3D printing process made up of layers. For printing advanced materials reliably, apply a thin layer of Magigoo on your print bed before printing. This will ensure a successful print. If too much glue has been lacquered on, please wipe with a damp sponge & then reapply glue.
