3D Printer Shop

  • Luvocom 3F PPS CF 9938 Black Filament
    View Cart
    Add to cart / Details

    PPS CF 9938 Carbon Fiber Filament 1.75mm Black 750g – First in NZ!

    $199.00 +gst

    3D4Makers Luvocom 3F PPS Carbon Fiber 3D Printing Filament

    Luvocom® 3F PPS CF 9938 BK Filament is a Polyphenylene sulfide, linear with 15% added carbon fibers, and is known for it's heat and chemical resistance. Below 200 °C the material doesn't dissolve in any solvent. This particular high performance polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts. This 3D4Makers PPS CF filament features the following properties:
    • Outstanding chemical and thermal resistance
    • Strong, stiff and lightweight
    • Dimensional stability
    • Inherently flame retardant
      • UN-ECE R.118.03 (fire behaviour of materials in buses)
      • UL94 Vertical Burning Test
      • EN 45545 (fire behaviour of materials in trains)
        • ISO 4589-2 OI (oxygen Index)    R22 + R23 - HL1, HL2, HL3
        • ISO 5659-2 Ds (smoke density) R22 + R23 - HL1, HL2, HL3
        • AFNOR NF CIT (gas toxicity)       R22 - HL1, R23 - HL1, HL2, HL3
    Matte Black Colour 1.75mm filament diameter 750 grams roll - 0.75kg
  • Black PLA Filament NZ
    View Cart
    Add to cart / Details

    FlashForge Petg Carbon Fiber 3D Filament – 1kg

    $79.00 +gst

    FlashForge Carbon Fibre PETg Filament

    Made using PETG and High-Modulus Carbon Fiber, FlahForge PETG CF is a high strength, matted, easy to 3d print CF reinforced 3D printing filament. Carbon Fibre coupled with the higher temperature handling & stiffness of PETG presents an advantage over other PLA based carbon fibre filaments that soften at lower temperatures, since PLA will soften faster than Petg & is also weaker. This filament is ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing. Petg is also easier to 3d print than Nylon in some 3d printers. This filament is an excellent alternative to carbon fiber Nylon filaments in case you need lower moisture absorption, & higher stiffness compared to a Nylon based polymer. 1.75mm 1kg roll of PetG Carbon Fiber Filament Benefits of  PETG Carbon include: PETG Carbon Filament Material Properties
    • Density 1.3 g/cm³
    • Charpy impact Strength 3.91 KJ/m2
    • Tensile Strength 51 MPa
    • Glass temperature tg 75°
    • Superior Chemical Resistance vs. ABS
    • Amorphous:  Low and near isotropic, for minimal shrinkage
    • Low moisture absorption:  3X lower vs. ABS
    • Low odor emitted during printing
    • Wide processing range:  220 - 260°C
  • Yellow 3D Printing Glue
    View Cart
    Add to cart / Details

    Glue Stick for 3D Printing – Improve Adhesion Reduce Warping

    $3.00 +gst
    This is an affordable versatile glue stick that works really well on all bed surfaces for all 3d printers. PLA, ABS, ASA, HIPS etc will benefit from glue particularly on glass beds. You will need glue when 3d printing with Nylon, Carbon Fibre, PolyPropylene, & other Engineering materials that don't like to stick to other surfaces. Applying glue greatly reduces warping from all materials. You can start with this cheapest glue stick, & then move to get more specialised glue sticks from our collection of bed prep adhesives here. Just apply a thin layer of this glue on a warm build surface, & print directly on it. Please take care that if printing directly on glass beds then some materials can crack the bed when taking it off after using glue. We recommend you buy a PEI sheet first rather than directly on glass or ceramic. This is a PVA based glue that easily wipes off with a damp cloth. Reapply only as needed. Less is more with Glue when used for 3d printing. 20g glue stick
  • Phrozen Rapid Black 3D Printer Resin New Zealand
    View Cart
    Add to cart / Details

    Phrozen Rapid Water Washable Resin Black 1Kg

    $89.00 +gst

    Phrozen Rapid Water Washable Resin - Now in New Zealand!

    Phrozen Rapid ABS Like Water Washable Resin is designed to suit most SLA style LCD UV 3D Printers. Probably the best water washable resin for the best price in New Zealand! Low Viscosity & Low Odour make for it very easy to 3d print with. Tough & Non-Brittle Phrozen 3D Water Washable Resin is very hydrophilic so its easy to clean the model & the build area with just plain water. This Phrozen Resin is optimised for all popular 405nm LCD 3d printers including Phrozen 3D Printers, Anycubic, Wanhao, Creality, Elegoo, Longer etc Faster Printing now possible on all 3d printers. Very fast Cure time as low as 1.5 seconds per layer on Phrozen's own Sonic 4K XL ultra fast 3d printer at 50µm Please check out our new Phrozen Sonic XL 4K for more details on this cutting edge 3d printer. Weight: Black 1Kg per bottle In stock right here in Auckland & ready to ship.
  • Phrozen Model Gray water washable SLA Resin NZ
    View Cart
    Add to cart / Details

    Phrozen Water Washable Resin Gray 1Kg

    $89.99 +gst

    Phrozen Gray Water Washable Resin - Now in New Zealand!

    Phrozen ABS Like Water Washable Resin is designed to suit most SLA style LCD UV 3D Printers. Probably the best water washable resin for the best price in New Zealand! Low Viscosity & Low Odour make for it very easy to 3d print with. Tough & Non-Brittle Phrozen 3D Water Washable Resin is very hydrophilic so its easy to clean the model & the build area with just plain water. This Phrozen Resin is optimised for all popular 405nm LCD 3d printers including Phrozen 3D Printers, Anycubic, Wanhao, Creality, Elegoo, Longer etc Faster Printing now possible on all 3d printers. Very fast Cure time as low as 1.5 seconds per layer on Phrozen's own Sonic 4K XL ultra fast 3d printer at 50µm Please check out our new Phrozen Sonic XL 4K for more details on this cutting edge 3d printer. Weight: Grey Colour 1 Kg bottle In stock right here in Auckland & ready to ship.
  • Phrozen 3d printer White Resin New Zealand
    View Cart
    Add to cart / Details

    Phrozen ABS-Like White Resin 1Kg

    $90.00 +gst

    Phrozen Standard White Resin - Now in New Zealand!

    Phrozen ABS Like Resin is designed to suit most SLA style LCD UV 3D Printers. The best SLA resin at the best price in New Zealand! Low Viscosity & Low Odour make it very easy to 3d print with these resins. ABS like feel making it more flexible & not brittle. This Phrozen Resin is optimised for all popular 405nm LCD 3d printers including Phrozen 3D Printers, Anycubic, Wanhao, Creality, Elegoo, Longer etc Cure time as low as 2.5 seconds per layer on Phrozen's own Sonic 4K XL ultra fast 3d printer at 50µm Please check out our new Phrozen Sonic XL 4K for more details on this cutting edge 3d printer. Weight: 1 Kg bottle
  • Phrozen 3D Printing Resin Gray NZ
    View Cart
    Add to cart / Details

    Phrozen ABS-like Gray Resin 1Kg

    $90.00 +gst

    Phrozen Standard Gray 3D Printing Resin - Now in New Zealand!

    Phrozen ABS Like Resin is designed to suit most SLA style LCD UV 3D Printers. The best SLA resin at the best price in New Zealand! Low Viscosity & Low Odour make it very easy to 3d print with these resins. ABS like feel making it more flexible & not brittle. This Phrozen Resin is optimised for all popular 405nm LCD 3d printers including Phrozen 3D Printers, Anycubic, Wanhao, Creality, Elegoo, Longer etc Cure time as low as 2.5 seconds per layer on Phrozen's own Sonic 4K XL ultra fast 3d printer at 50µm Please check out our new Phrozen Sonic XL 4K for more details on this cutting edge 3d printer. Weight: 1 Kg bottle In stock right here in Auckland & ready to ship.
  • Phrozen TR250LV high temp 3d printing resin 1kg
    View Cart
    Add to cart / Details

    Phrozen TR250LV Gray High Temp Resin 1Kg

    $99.00 +gst

    Phrozen High Heat Functional Resin - now in NZ

    Excellent for 3D Prints with high precision & high temperature resistance up to 90 deg C! Tougher than most common resins on the market, for a very affordable price. EASY POST-PROCESSING: Coloring, drilling and grinding are all suitable. A great choice for vulcanized rubber molding process, such as jewelry casting, GK kit, and all other high-heat applications, thanks to high temperature resistance and hardness. Perfect for vacuum forming. And very good for othodontic use in thermoforming aligner templates. Weight 1Kg Grey Colour
  • 3D Printing Tough SLA Resin NZ
    View Cart
    Add to cart / Details

    Phrozen Nylon Green Resin 1kg

    $129.00 +gst

    Phrozen Nylon like Tough Resin

    Excellent resin for 3D Prints that need the engineering properties of Nylon such as high toughness, impact resistance, flexural strength, & slightl flexibility. Tougher than most common resins on the market, & better flex than other tough resins formulations available. Weight 1Kg Light Green Colour In stock & ready to ship from Auckland
  • View Cart
    Add to cart / Details

    Phrozen Tough Stiff Rock Black Resin – 1Kg

    $129.00 +gst

    Phrozen Ultra Rigid Tough Resin

    Excellent resin for 3D Prints that need high rigidity & extreme strength. High compression & high impact resistance, with minimal flexibility. Perfect for use in moulds, vacuum forming, & die casting master applications including silicone moulding. Tougher than most common resins on the market, & rock like stiffness for repeated use. Weight 1Kg Black Colour In stock & ready to ship from Auckland
  • Phrozen Mighty8k New Zealand
    View Cart
    Add to cart / Details

    Phrozen Sonic Mighty 8K Mono LCD Resin 3D Printer

    $1,399.00 +gst

    Phrozen Sonic Mighty 8K 3D Printer

    Perfectly balancing compact size with improved productivity, Sonic Mighty 8K allows you to mass-produce all your models with ultra-high 8K resolution, regardless of size or scale. Build Volume 218  x 123  x 235 mm high Super High XY Resolution of only 28 microns. Improvements include a Laser Etched Build platform which improves adhesion. Our machines also include a camera inside, which is designed for real time print monitoring with the future firmware update. The intuitive design of Sonic Mighty 8K makes it suitable for everyone including beginners. With a Monochrome LCD, you get a longer life screen as well as build speed thats up to 3 times faster than most other LCD LED styles mSLA 3d printers on the market. Pair it with the new Phrozen Wash & Cure Kit for perfect resin 3d prints time & again. We stock our items right here in Auckland. Happy Resin 3D Printing! Full Tech Specs below:
  • Phrozen Sonic Mega 8K 15 inch Mono LCD Resin 3D Printer
    View Cart
    Add to cart / Details

    Phrozen Mega 8K V2 Resin 3D Printer – Latest Version

    $4,600.00 +gst

    Phrozen Sonic MEGA 8K V2 15" Mono LCD 3D Printer

    The largest 8K mono LCD Resin 3D Printer in the world has been upgraded. The Mega 8K V2 has a faster print speed, automatic  resin filler, & a drip hook. With a massive build volume of 330mm x 185mm x 400mm & 43 micron XY resolution, you can build large parts without compromising detail or running out of resin. This is a game changer. We're proud to have the newest 8K Monochrome 15" LCD resin 3d printer available in New Zealand. Please note we are the Exclusive Official Reseller of Phrozen in New Zealand. We provide local support & a legitimate warranty. Buy from us & get access to genuine spare parts locally. Buying from random shops means no manufacturer warranty, no support or repairing as they will not have parts on hand. They have most likely just parallel-imported the machines, & should something go wrong, you might find yourself stuck. These machines are highly sought after, & have sometimes 1-2 months production delay. Traditionally, larger resin machines had lower resolution, but with the Mega 8K screen, you get a 43um XY unlike anything else on the market at this price. When a Big 3d Printer isn't enough, you need a Phrozen MEGA! Liquid Resin 3d printers used to be small & expensive. So they were used only by jewellers & dentists. Today, thanks to Phrozen, we now have a massive printer area in liquid resin technology giving everyone access to factory quality layerless parts at a price point that is unheard of. The Mega 8k revolutionises 3d printing & enables you to make parts that can be sold directly to customers - without them looking 3d printed. Happy Resin 3D Printing! 
 
 
 
  Excellent  
    
 Based on 63 reviews 
  
 
 
 
 
 
 
  
 
 
 
 Alex L 
 
 
 Alex L 
 
2023-11-28
 
 
  
I have dealt with the 3D Printer Store for several months now and have to say that the experience has been very positive.
Zubbin is extremely knowledgeable in this field, enthusiastic, honest and responsive.
Pre and Post Purchase customer support has been great. He will have your best interest in mind and will recommend the best product for your needs.
My positive experience dealing with him professionally has led me to buy product from him for personal use.

We are very lucky to have such a supplier providing these kinds of specialized 3D Printers, Filaments, accessories and services in New Zealand.

The rare filaments can sometimes be difficult to source but he will do his best to find alternatives to get what's needed ASAP or even suggest proper alternatives.

I am looking forward to future collaboration with this supplier.
  
 
  
 
 
 
 Elias Bayless 
 
 
 Elias Bayless 
 
2023-10-18
 
 
  
First choice for all my 3d printing needs, the team here really does a great job! Always get my filament here and it arrives really fast and always performs very well in my printer.
  
 
  
 
 
 
 Lyle Adams 
 
 
 Lyle Adams 
 
2023-10-18
 
 
  
I recently purchased a 3D printer from this business and also took their training. Zubbin's knowledge and assistance is top-notch. He provided valuable insights not only on 3D printing but also related topics. Highly recommended!!
  
 
  
 
 
 
 Dylan Cooper 
 
 
 Dylan Cooper 
 
2023-09-19
 
 
  
Solid company to deal with. I have ordered filament multiple times from this company. I have also been advised on better filament options than what I ordered, which worked out really well. Will continue to shop here!
  
 
  
 
 
 
 Maarten van den Heuvel 
 
 
 Maarten van den Heuvel 
 
2023-08-21
 
 
  
Good prices, fast shipping, excellent communication and when there was a hiccup with my order it was sorted super fast and to my full satisfaction. Can recommend.
  
 
  
 
 
 
 Phil Shimmin 
 
 
 Phil Shimmin 
 
2023-08-16
 
 
  
Great service from these guys. On my most recent order there was a stellar turnaround of only 24 hours between initial stock query and the filament being in my printer.
  
 
  
 
 
 
 Dan King 
 
 
 Dan King 
 
2022-09-29
 
 
  
Shipping and packaging was excellent and best in market pricing. I had an issue with a misunderstanding about the particular properties of the resin I purchased but Zubbin responded quickly and helped me resolve the issue. Perfect customer service, they have gained a loyal customer.
  
 
  
 
 
 
 Mike O 
 
 
 Mike O 
 
2022-09-12
 
 
  
These guys are awesome. I used to buy my filament from overseas for my projects and needed something in a hurry and went looking for something local. I'm so glad I did. Not only are the prices as good or better than what I was getting overseas and even more of a deal when considering the pricing I was paying for shipping their turn around each time has been next day. Great range of in stock filaments, good prices, super fast turn around and excellent customer service.
  
 
  
 
 
 
 Dion Hitchens 
 
 
 Dion Hitchens 
 
2022-08-09
 
 
  
Kia ora,
This is a fantastic business selling reliable machines at a great price point. What I am impressed with the most is that the owner is always willing to help if I have a problem his insight and knowledge he is so willing to share is always on point and allows me to solve the problem I am trying to resolve.
I look forward to doing more business with them.
thanks
  
 
  
 
 
 
 Michael Williams 
 
 
 Michael Williams 
 
2022-06-28
 
 
  
Sent them an email explaining what I was trying to achieve and asked for their advice. They responded promptly and recommend a basic 3d printer which turned out absolutely fit for purpose. Ordered online and with good communication i had printer within days. Will definitely return when I upgrade. This printing stuff is very addictive.