3D Printer Shop

Dreve FotoDent Surgical Guide Resin

$550.00 +gst

Light-curing resin for the manufacturing of dental drill guides. For manufacturing of dental surgical drill guides for tooth-supported and/or teethridge-supported and surgical invasive application. Drill guides made from FotoDent® guide are dimensionally stable and biocompatible.

rodin flexi splint soft 3d printing resin

Rodin FlexiSplint Soft Dental 3D Resin

$699.00 +gst

Rodin FlexiSplint 1kg Flexible Dental 3D Resin

The ultimate solution for high-comfort, flexible dental appliances. This biocompatible resin is engineered for patients who find rigid guards uncomfortable, providing a snug fit with excellent impact resistance.

Indications: Flexible night guards, comfort bite splints, and snoring appliances.
Key Benefits: Exceptional elasticity, high tear resistance, and a "memory" fit that conforms to patient anatomy.
Aesthetics: High-clarity, transparent finish that resists staining and yellowing.
Size: 1kg Bottle

Rodin Splint rigid dental 3d printing Resin

Rodin Splint Rigid Dental 3D Resin

$699.00 +gst

Rodin Splint Rigid - 1kg Dental 3D Resin
The high-strength, rigid Flexisplint resin, is specifically engineered for patients requiring maximum stability and wear resistance.

This biocompatible resin is the professional choice for durable, long-term dental appliances that must withstand heavy biting forces.

Indications: Rigid night guards, occlusal bite splints, and snoring correction appliances.
Key Benefits: High fracture toughness, crystal-clear aesthetics, and superior dimensional stability.
Patient Comfort: Tasteless and odorless formula designed to resist yellowing over time.
Size: 1kg Bottle

Phrozen Dental Cure+ high speed validated 3d print curer

Phrozen Cure+ High Speed Validated Dental Curer

$2,500.00 +gst

Phrozen Cure+ is the fastest curer we have ever seen. Validated & Accessible Dental Curer with an Open Validated System for perfect Curing every time. Effortlessly post-cure dental appliances like crowns, bridges, surgical guides, and occlusal splints to biocompatibility standards in just minutes, at the speed needed for same-visit treatment. CURE+ comes with a fully validated preset of curing profiles for industry-leading resin manufacturers, so you can cure confidently without the hassle. Cures common dental parts in around 10 mins, compared to 30 mins in the past.

Boosting Biocompatibility and Mechanical Properties

365, 385, and 405 nm - Broad wavelength range to ensure optimal curing for any dental materials. Flash Curing - High-intensity flashing for deeper and faster post-curing without the risk of overcuring the surfaces. Heated Enclosure - Controlled heating at 60°C for faster curing and enforcing tighter polymer bonding for better mechanical properties.

Rodin Titan C&B All-On-X Ceramic Dental 3D Resin

$1,198.00 +gst

Rodin Titan is a nanohybrid 3D printing resin developed by Pac-Dent with over 50% ceramic content. It is engineered specifically for creating high-impact dental restorations, such as full-arch prosthetics and dentures. With natural translucency, superior radiopacity, and lifelike shade options, Titan delivers durable yet esthetic restorations that integrate seamlessly into digital workflows. Validated for use with various 3D printers including Phrozen, Asiga, Formlabs, etc.

Phrozen Sonic CS+ Dental 3D Printer

$8,500.00 +gst

The New Phrozen Sonic CS+ offers unparalleled performance from a desktop dental 3d printer. Armed with Phrozen's Dental Slicer software, you'll also get an easy work flow & perfect integration to a host of popular programs & IOS scanners. The CS supports a huge range of Resins & is supplied with Validated Resin profiles. The CS+ is fast enough to be a chair side solution, & its high speed 385nm UV system can 3d print everything in mins - whether it be just models, Surgical guides or C&B.

Phrozen Wash Mega S

$799.00 +gst

Phrozen MEGA S Washer

Large 3d prints need proper cleaning & curing. So you've got yourself a nice big 3d printer.. you need a good wash & cure process for your resin 3d prints to give you the end results you expect. The Phrozen Mega S Washer has a large 30L capacity & allows the entire build plate to be washed inside it. Without touching the model, you can simply place the entire plate & let the washer do everything for you. No mess, no need to touch the resin. Once cleaned, the models are ready to be cured.

CreatBot UltraPA-CF 3D Printing Filament

ASA-CF UV Stable low shrink Carbon Fiber filament

$75.00 +gst

ASA CF is a UV stable, low moisture absorbing, high strength, light weight plastic optimized for outdoor use. ASA is similar to ABS in almost all aspects with the addition of UV stability. Adding carbon fibers to ASA makes it stronger & stiffer, compared to pure ABS / ASA that is more bendy. And despite the addition of fibers, CF ASA still offers the same impact properties whilst being even lighter in weight. This makes Carbon ASA excellent in high performance boats & cars. ASA also has a matted look compared to plastics like PET which are generally quite glossy. Carbon Fiber reinforced ASA has greater stiffness & strength over conventional ASA, & also reduces shrinkage. This makes ASA an excellent choice where you want strength benefits comparable to Nylon, but with UV performance. Carbon Fiber ASA Filament 1.75mm 1 Kg roll matte Black colour

Sale!

R-PLA blue sustainably sourced eco-friendly filament

R-PLA Sustainably sourced 3D Printing Filament

+gst

Our rPLA 3d printing filament is made from factory offcuts of PLA. So the raw material used is exactly the same as standard PLA, its simply re-melted into a PLA 3d printing filament. This stops the wasted PLA cuts from going into landfill. R-pla performs exactly the same as PLA filament that is extruded from standard pellets, while greatly reducing carbon footprint. In the past, eco-friendly filaments costed a lot more than conventional filaments, but we are working hard to change this. To show our commitment to help New Zealand makers achieve sustainability goals in 3d printing, our newest line of PLA-R filaments is at a price never before seen in New Zealand. On top of our big range of standard colours, please also check out our vibrant & super bright fluoro-colour rPLA range for even more impact.

PLA Silk Twist Rainbow Colour Red Yellow Blue

PLA Silk Twist Rainbow – Red, Yellow & Blue

$35.00 +gst

For a long time, we've wanted PLA that has a true metallic shine to it without having to polish it. Its the closest we've ever come to a PLA that actually shines like a real metal without having any metal in it. The shine also hides the print layer lines to a greater extent than other colours. So parts look like they are made of metal with a paint coat. This is the closest we have been to faux metal 3d prints. And its Extremely affordable. Multi-colour rainbow rolls are random as they roll out, each is slightly unique. Your roll is going to have the same gradients, just not at the same exact places within the spool.We hope our New Zealand makers love this new filament.

PETG Translucent Rainbow

$35.00 +gst

PETG Translucent Rainbow

A translucent PETG rainbow filament with smooth color transitions and light-passing finish.
Ideal for lamps, décor, and display prints.
Durable, glossy, and easy to print.

PETG Rainbow – Aurora, Blue & Purple

$35.00 +gst

PETG Rainbow – Aurora Blue Purple

A striking PETG rainbow filament blending deep blue and purple aurora tones.
Durable, glossy, and ideal for functional and decorative prints.
Strong layer adhesion with smooth color transitions.

PLA Gradient Winter White Filament

$35.00 +gst

PLA Gradient Winter White

A soft winter-inspired PLA gradient with clean white and frosted tones.
Ideal for décor, vases, sculptures, and minimalist models.
Easy to print like standard PLA, with a smooth finish that softens layer lines.

PLA Gradient Emerald Rainbow Filament

$35.00 +gst

PLA Gradient Emerald

A rich emerald gradient PLA with deep green tones and smooth color transitions for elegant, eye-catching prints.
Ideal for vases, décor, sculptures, fantasy props, and display models.
Easy to print like standard PLA, with a smooth finish that softens layer lines.

PLA Rainbow Colour Silk Gold & Glitter Red

PLA Silk Glitter Rainbow – Silk Gold & Glitter Red

$35.00 +gst

For a long time, we've wanted PLA that has a true metallic shine to it without having to polish it. Its the closest we've ever come to a PLA that actually shines like a real metal without having any metal in it. The shine also hides the print layer lines to a greater extent than other colours. So parts look like they are made of metal with a paint coat. This is the closest we have been to faux metal 3d prints. And its Extremely affordable. Multi-colour rainbow rolls are random as they roll out, each is slightly unique. Your roll is going to have the same gradients, just not at the same exact places within the spool.We hope our New Zealand makers love this new filament.

PLA Rainbow Colour Glitter Blue & Silk Black

PLA Silk Glitter Rainbow – Black Blue & Purple Rose

$35.00 +gst

This is a roll of rainbow Glitter filament that has 4 colours, with a sparkly metallic gradient effect. You've got multiple metallic colours all rolled into one continuous shiny filament. The silk metallic look hides layer lines, the sparkle makes the details pop, & the gradient makes each 3d print unique. We hope our New Zealand makers love this new filament.

PLA Sparkly Rainbow Filament – Chameleon Galaxy

$35.00 +gst

For a long time, we've wanted PLA that has a true metallic shine to it without having to polish it. Please welcome Silk PLA. Its the closest we've ever come to a PLA that actually shines like a real metal without having any metal in it. The shine also hides the print layer lines to a greater extent than other colours. So parts look like they are made of metal with a paint coat. This is the closest we have been to faux metal 3d prints. And its Extremely affordable. Multi-colour rainbow rolls are random as they roll out, each is slightly unique. Your roll is going to have the same gradients, just not at the same exact places within the spool. We hope our New Zealand makers love this new filament.

Sale!

PLA Wood gradient rainbow filament

+gst

PLA Wood Gradient is a natural-toned filament designed to print wood-like creations with an organic, realistic finish.

Perfect for cabins, furniture, props, and any nature-inspired builds. Rustic warmth straight onto your table-top.

Ideal for 3D printing projects like statues, vases, decor pieces, D&D terrain, and architectural models that need a natural touch.

Pair it with stone & metallic filaments to elevate your 3D prints to a whole new level.

PLA Silk Rainbow – Spring Breeze

$35.00 +gst

For a long time, we've wanted PLA that has a true metallic shine to it without having to polish it. Its the closest we've ever come to a PLA that actually shines like a real metal without having any metal in it. The shine also hides the print layer lines to a greater extent than other colours. So parts look like they are made of metal with a paint coat. This is the closest we have been to faux metal 3d prints. And its Extremely affordable. Multi-colour rainbow rolls are random as they roll out, each is slightly unique. Your roll is going to have the same gradients, just not at the same exact places within the spool.We hope our New Zealand makers love this new filament.

PLA Silk Rainbow – Charm

$35.00 +gst

For a long time, we've wanted PLA that has a true metallic shine to it without having to polish it. Its the closest we've ever come to a PLA that actually shines like a real metal without having any metal in it. The shine also hides the print layer lines to a greater extent than other colours. So parts look like they are made of metal with a paint coat. This is the closest we have been to faux metal 3d prints. And its Extremely affordable. Multi-colour rainbow rolls are random as they roll out, each is slightly unique. Your roll is going to have the same gradients, just not at the same exact places within the spool.We hope our New Zealand makers love this new filament.

PLA Silk Rainbow – Macaron

$35.00 +gst

For a long time, we've wanted PLA that has a true metallic shine to it without having to polish it. Its the closest we've ever come to a PLA that actually shines like a real metal without having any metal in it. The shine also hides the print layer lines to a greater extent than other colours. So parts look like they are made of metal with a paint coat. This is the closest we have been to faux metal 3d prints. And its Extremely affordable. Multi-colour rainbow rolls are random as they roll out, each is slightly unique. Your roll is going to have the same gradients, just not at the same exact places within the spool.We hope our New Zealand makers love this new filament.

PLA Silk Rainbow – Peach

$35.00 +gst

For a long time, we've wanted PLA that has a true metallic shine to it without having to polish it. Its the closest we've ever come to a PLA that actually shines like a real metal without having any metal in it. The shine also hides the print layer lines to a greater extent than other colours. So parts look like they are made of metal with a paint coat. This is the closest we have been to faux metal 3d prints. And its Extremely affordable. Multi-colour rainbow rolls are random as they roll out, each is slightly unique. Your roll is going to have the same gradients, just not at the same exact places within the spool.We hope our New Zealand makers love this new filament.

PLA Silk Triple Colour Blue Green Orange Filament

PLA Silk Triple Colour Filament – Blue & Green & Orange

$35.00 +gst

This is a triplre colour filament, it literally means the filament strand is composed of 3 simultaneous colours. This is a roll of Blue & Green & Orange mix. The filament is 3-sided. Silk PLA gives true metallic shine to it without having to polish it or post-process it. And now we have this dual filament concept with twin sided filament.

PLA Silk Dual Colour Purple Green Filament

PLA Silk Dual Colour Filament – Purple & Green

$35.00 +gst

This is a dual colour filament, it literally means the filament strand is composed of 2 simultaneous colours. This is a roll of Purple & Green mix. The filament is 2-sided. Silk PLA gives true metallic shine to it without having to polish it or post-process it. And now we have this dual filament concept with twin sided filament.

PLA Silk Dual Colour Filament – Gold & Blue

$35.00 +gst

This is a dual colour filament, it literally means the filament strand is composed of 2 simultaneous colours. This is a roll of Gold & Blue mix. The filament is 2-sided. Silk PLA gives true metallic shine to it without having to polish it or post-process it. And now we have this dual filament concept with twin sided filament.

Phrozen Water Washable Tough White Resin

$120.00 +gst

Phrozen Tough Water Washable White Resin Traditional water-washable resin can be brittle. Our new Phrozen Water Washable Tough resin is formulated differently. It has double the strength of most water wash resins. It also has a bit of flex, which creates more durable models. Get the strength of Tough Resins with the Ease of washing with plain water. Our Tough Resin is now available in a Water Washable version.

Creatbot Heat Brake Assembly

$120.00 +gst

This is the new quick change nozzle assembly that includes a heat brake. Works on all new Creatbot D600 Pro 2 HS & Creatbot D1000 HS series 3d printers. It will not work on older D600 Pro 2 machines, or older D1000 3d printers. Please contact us if you are unsure.

ColorFabb PLA StoneFill – mimic Concrete or Bricks

$75.00 +gst

PLA Stonefill is a revolutionary 3D printing material that mimics the texture and feel of stone, without having any stone content in it. So it is just as easy to print as common PLA. Great if you want a textured look to your 3d prints without having to do any post processing on the CAD designs. Perfect for 3d printing projects where concrete, bricks or other textured look is required such as Statues, Vases, D&D terrain, & even Architecture models. Pair them with our wood, rock & metallic designer filaments to elevate your 3d prints to a whole new level.

Kiwifil rPETg Filament – Popular Colours

$52.00 +gst

rPETG filament is Proudly made in New Zealand by reusing offcuts & waste of the same high quality PETg material thats used in food packaging manufacturing. So the plastic that would otherwise go to waste is turned into world class filament! This is a great way to manufacture parts using a very common plastic, while significantly reducing the carbon footprint of your 3d printed items. Sustainability with Style - RPETg prints like any petg filament that is extruded from conventional pellet raw material. We've got a whole lot of colours in, & more are on the way. If you don't see a colour you like, please let us know. If you're looking for R-PETg in spectacular colours, please see our Kiwifil R-PETg Speciality Filaments.

Kiwifil rPETg Filament – Specialty Colours

$45.00 +gst

R-PETG in striking colours - not the boring colours you usually see petg filament in. Proudly Made in New Zealand by reusing offcuts & waste of the same high quality PETg material thats used in food packaging manufacturing. So the plastic that would otherwise go to waste is turned into world class filament - now isn't that clever..? Sustainability with Style - RPETg works like any petg filament that is extruded from conventional pellet raw material. We've got a whole lot of colours in, & more are on the way. If you don't see a colour you like, please let us know. If you're looking for R-PETg in common colours, please see our Kiwifil R-PETg Popular Colour Filaments.

Kiwifil PLA Filament from 100% Recycled 3D Prints

$40.00 +gst

The ultimate closed-loop recycled filament made right here in New Zealand!
This rPLA is made entirely from real 3D prints collected from customers — 100% post-consumer PLA, recovered and reborn. Failed Benchies, mountains of supports, snapped Baby Yodas, & broken prototypes … all carefully sorted, shredded, melted, filtered, and extruded back into high-quality filament.

Print quality you can trust.
Our “Recycled Red” rPLA Pro delivers a smooth, consistent finish and performs just like premium virgin PLA. Because it’s genuinely recycled, the exact shade of red may vary slightly between batches.

When you're tinkering, & don't care about the colour, you can care for the planet.

You reduce the carbon foot print, reduce wastae, get top quality 100% Recycled PLA filament, & support a cutting edge Kiwi manufacturer with a difference. So using 100% RPLA is a win-win.

We're really proud to offer KiwiFil's New Zealand made sustainably sourced R-PLA Pro filament from KiwiFil.

Sale!

Kiwifil rPLA Pro Filament – Rainbow Colours

+gst

KiwiFil R-PLA Pro comes in beautiful colours - not the boring colours you thought 100% Recycled PLA had to be. It is Proudly Made in New Zealand from the same raw material as standard PLA pro, with the bonus of using post-industrial waste from the manufacturing of food packaging. So the plastic that would otherwise go to a landfill is turned into world class filament. Sustainability with Style - RPla works as well as any filament that is extruded from conventional pellet raw material. We've got a whole lot of colours in, & more are on the way. If you don't see a colour you like, please let us know. If you're looking for R-PLA Pro in common colours, please see our Kiwifil R-PLA Pro Standard Colour Filaments.

Sale!

rPLA NZ made sustainbly sourced 3d printing filament

Kiwifil rPLA Pro Filament – Standard Colours

+gst

KiwiFil R-PLA Pro is Proudly Made in New Zealand from the same raw material as standard PLA pro, with the bonus of using 100% post-industrial waste from the manufacturing of food packaging. So the plastic that would otherwise go to a landfill is turned into world class filament. Sustainability without compromise - RPla works as well as filament that is extruded from conventional pellet raw material. We've got a whole lot of colours in, & more are on the way. If you don't see a colour you like, please let us know. If you're looking for R-PLA Pro in rainbow, glittery & gradient colours, please see our Kiwifil R-PLA Pro Speciality Colour Filaments here.

Colorfabb PLA-LW HT – Choose Your Colour

$80.00 +gst

Colorfabb Light Weight High Temp PLA filament reduces weight of printed parts by allowing its density to be adjusted based on printing temperature.

Print 2–3 times more parts compared to regular non expanding materials.

This is the new higher temperature handling version of the prove Colorfabb LW-PLA. It was originally designed for aeromodelling to make light weight aeroplane & drone hulls. But it has been very successful as a casting pattern in lost wax style casting processes. Initially, we used standard PLA for lost wax casting patterns. But since PLA-LW is lower density, there is less PLA to burn out. This makes much cleaner patterns & has far reduced ash in the process. So whether its light weight components for general parts, or metal casting patterns, try PLA LW for your next project.

Colorfabb PLA-LW Light Weight filament – Choose Colour

$70.00 +gst

Colorfabb Light Weight PLA filament reduces weight of printed parts by 65%, by allowing its density to be adjusted based on printing temperature.

Lowest density at maximum expansion 0.403 – 0.476 g·cm⁻³.

Print 2–3 times more parts compared to regular non expanding materials.

It was originally designed for aeromodelling to make light weight aeroplane & drone hulls. But it has been very successful as a casting pattern in lost wax style casting processes. Initially, we used standard PLA for lost wax casting patterns. But since PLA-LW is lower density, there is less PLA to burn out. This makes much cleaner patterns & has far reduced ash in the process. So whether its light weight components for general parts, or metal casting patterns, try PLA LW for your next project.

Sale!

vibers sustainbly source pla matted purple

Vibers Sustainably Grown PLA – Pastel Purple

+gst

Vibers is a revolutionary PLA from Netherlands that is made using Elephant grass which grows on poor quality soiled, & captures 4x CO2 than a forest. This stops PLA made entirely from sugarcane & corn, which competes with rain forest clearings or agricultural land for food sources. Elephant grass grows in poor quality soil, & efficiently captures 4x more CO2 than a common forest bush. Colorfabb in Netherlands then makes wonderful filament using Vibers PLA to give you the same quality & precision you expect from them. This is a win-win for all. Top quality - sustainability - easy to print - what more can we ask for..! This PLA has a beautiful earthy terracotta look to it. The elephant grass formulation is not bright, but a more natural looking pastel colour which instantly gives a more earthy terracotta feel to your products. This is perhaps the most important product we have ever released into New Zealand, & is a product really close to our hearts. Please support sustainable 3d printing products, & together, let us reduce our 3d carbon foot print.

Sale!

Vibers Sustainably Grown PLA – Pastel Green

+gst

Vibers is a revolutionary PLA from Netherlands that is made using Elephant grass which grows on poor quality soiled, & captures 4x CO2 than a forest. Elephant grass grows in poor quality soil, & efficiently captures 4x more CO2 than a common forest bush. This reduces reliance on PLA made entirely from sugarcane & corn which competed with rain forest clearings or agricultural land for food sources. Colorfabb in Netherlands then makes wonderful filament using Vibers PLA to give you the same quality & precision you expect from them. This is a win-win for all. Top quality - sustainability - easy to print - stronger - what more can we ask for..! This PLA has a beautiful earthy look to it. The elephant grass formulation is not bright, but a more natural looking pastel colour which instantly gives a more terracotta feel to your products. This is perhaps the most important product we have ever released into New Zealand, & is a product really close to our hearts. Please support sustainable 3d printing products, & together, let us reduce our 3d carbon foot print.

Sale!

Vibers Sustainably sourced PLA filament white

Vibers Sustainably Grown PLA – White

+gst

Vibers is a revolutionary PLA from Netherlands that is made using Elephant grass which grows on poor quality soild, & captures 4x CO2 than a forest. This stops PLA made entirely from sugarcane & corn, which competes with rain forest clearings or agricultural land for food sources. Elephant grass grows in poor quality soil, & efficiently captures 4x more CO2 than a common forest bush. Colorfabb in Netherlands then makes wonderful filament using Vibers PLA to give you the same quality & precision you expect from them. This is a win-win for all. Top quality - sustainability - easy to print - what more can we ask for..! This PLA has a beautiful earthy terracotta look to it. The elephant grass formulation is not a bright white, but a more natural looking pastel colour which instantly gives a more natural feel to your products. This is perhaps the most important product we have ever released into New Zealand, & is a product really close to our hearts. Please support sustainable 3d printing products, & together, let us reduce our 3d carbon foot print.

Phrozen Sonic CS+ Complete Dental Package

$13,000.00 +gst

We have an unbeatable promotion on the new Sonic CS+ 3d printers. For the best possible dental 3d printing experience, our Premium Dental 3D Printing Package includes:

Phrozen Sonic CS+ Dental 3d printer
Phrozen Wash+ Dual tank cleaning system
Phrozen Cure+ High Speed curing unit
Phrozen Heat & Mix - Automated resin mixing station
Phrozen Essential Resin package - Study Model, Water washable & Ortho resin

Armed with Phrozen's Dental Slicer software, you'll also get an easy work flow & perfect integration to a host of popular programs & IOS scanners. Free Shipping NZ wide! Limited time. Sale terms apply.

42 HS 48 Z Bed Stepper Motor with Gear

$120.00 +gst

This motor is used in the Creatbot F430 3d printer. It is used as a Z axi motor that connects at the bottom to move the bed up & down using the ball screws.

Sale!

Colorfabb Varioshore TPU – 55A to 92A

+gst

ColorFabb's varioshore TPU is a ground breking flexible filament that allows you print parts from 92A right down to 55A, on almost any direct drive 3d printer. It achieves this using controlled foaming, so you can get the flex you want without having to own each & every filament of those shore hardnesses. You can print with shore hardness 92A(unfoamed) to shore 55A (maximum foamed). This is a 700g roll of foaming filament, which means you actually use less material in comparison to normal TPU & get a larger number of parts with a reduced weight.

Phrozen Lumii DLP Dental 3D Printer

$3,800.00 +gst

The Phrozen Lumii DLP 3D Printer is now available for dental professionals across New Zealand and Australia through 3D Printer Store. Whether it's 3D printing intraoral surgical guides, certified dental dentures, temporary crowns, detailed models, wax-ups, or even thermoforming aligners & retainers - the Lumii is equipped to handle every dental application with ease and precision. Though built mainly for dentistry, the Lumii system is also very capable in any ultrafine applications such as Jewellery making, including using wax castable resins & industrial resins. This cutting-edge solution combines precision, speed, and reliability, redefining what’s possible with DLP technology in dental applications, all at a price never seen before. Partner the Lumii with Wash+ Dual Tank Washer, Phrozen Cure Plus, & heated resin mixer for optimum ease of use.

Loctite IND 405 Clear Industrial 3d printing resin

Loctite IND 405 – Ultra Clear Tough Industrial 3D Printing Resin

$299.00 +gst

LOCTITE 3D IND405 is the clearest & most impact resistant among the tough 3D Printing resins available. A common problem with most tough resins is that they are quite brittle, & do not offer good elongation at break. But the IND 405 is a high-strength, high elongation engineering plastic with good impact resistance & very high optical clarity. It has also been weather tested with UV to perform well outdoors without yellowing. Its the only 3d printing resin printable on LCD resin 3d printers, that can 3d print automotive indicator lenses, among many other outdoor applications. LOCTITE 3D IND405 can be printed in various resin 3d printers and parts can be machined or polished for final clear finish.

Phrozen Ortho dental thermoforming resin

Phrozen Ortho model 3D Printing Resin Grey

$160.00 +gst

With up to 190°C heat resistance capability and 50μm resolution, Phrozen Ortho Dental Resin is your best choice to print highly detailed & accurate thermoforming models for creating clear aligners and orthodontic appliances. Thermoforming requires the template model to be exposed to high temperatures. Most 3d printing resins on the market are not able to handle such high temperatures reliably. They have a high risk of softening, which can impact the aligner or retainer that gets formed over the softened template model. And most thermoforming sheets stick more aggressively to low temp resins, further complicating the issues. Using high temp capable ortho resin makes good quality instruments reliably & accurately for maximum accuracy & patient satisfaction. Ideal for printing: 。Clear aligner models 。Orthodontic models

Phrozen Dental Study model 3D Printing Resin White

$120.00 +gst

Specifically formulated to print fast, Phrozen Study Model Resin prints at an astonishing 1.5 seconds per layer, completing a full-arch model in less than 25 minutes on high speed Phrozen dental 3d printers. It has a bright white colour, giving it a more traditional study model appearance. Ideal for printing: 。Study models 。Diagnostic models 。Gradual dentition / occlusal treatment progress

Phrozen Water washable dental model resin

Phrozen Water Washable Dental Model 3D Printing Resin Beige

$155.00 +gst

Phrozen Water-Washable Dental Model Resin delivers a high level of post-curing accuracy with minimum shrinks. Its water washable formulation makes it easy and safe to handle even in office environments, providing comforts for both patients and practitioners. Ideal for printing: 。Crown and bridge models with removable dies 。Implant analog models 。Diagnostic models

Loctite IND 406 High temp industrial 3d resin

Loctite IND 406 Black – High Temperature Industrial 3D Printing Resin

$299.00 +gst

LOCTITE 3D IND406 is the toughest High Temperature 3D Printing Resin available. A common problem with most high temperature resins is that they are quite brittle. But the IND 406 BK is a high-strength, high elongation engineering plastic with good impact and high temperature resistance up to 107 C. It has also been weather tested with UV to perform well outdoors with minimal change to mechanical properties. On top of that, you get high chemical resistance & water immersion performance, making it suitable for a variety of deplyoments. Stiffness, toughness and thermal durability make this the ideal material for a wide variety of tools in the production floor. Thanks to excellent chemical resistance & immersion testing, IND 406 is perfect for final parts production in Automotive manufacturing. The product is ideal for fixtures, interior and machinery parts. LOCTITE 3D IND406 can be printed in various resin 3d printers and parts can be machined, tapped, or polished for final finish.

Creatbot PEEK 250 Advanced Materials 3D Printer

Creatbot PEEK-250 Industrial Desktop 3D Printer

$23,000.00 +gst

The CreatBot PEEK-250 is a compact ultra performance 3D printer specially designed to work with high performance advanced materials such as PEI (Ultem tm), PSU, PEEK etc. It is designed for high reliability and industrial performance at a footprint that is substantially smaller than other industrial additive manufacturing systems. High performance Polymers & Composites are commonly used to additively manufacture high performance end use parts in aerospace, automotive, robotics & medical industries. Special Features found only on the Creatbot PEEK-250:

200C heated chamber
200 C Heated Bed
180C built in Annealing system.
480 C Actively cooled Extruder Head

Build volume 250 x 250mm x 300mm height From the company that brought you the first affordable desktop grade high temperature 3D Printer, now comes an advanced materials machine that is designed to deliver cutting edge factory parts in a semi-production capacity. 3d Print on demand in Automotive, Aerospace, Medical, & R&D specifically using PEI & its related family of plastic filaments.

Phrozen Sonic Z Bed Stepper Motor

$90.00 +gst

Bed movement stepper motor for Phrozen sonic 3d printers This motor is used to move the bed on many Phrozen Sonic series 3d printers: Sonic XL 4K, XL 2022. Phrozen Transform. Phrozen Shuffle & Shuffle XL. This is the larger higher current motor that is used with many of the professional end of Phrozen 3d printers. It is not used for older mighty series machines or the smaller mini series 3d printers.

FlashForge XY Sensor Switch for Creator Guider etc

$19.00 +gst

Flashforge X-Sensor Switch Board v0.4

A versatile end stop limit switch used by many FlashForge 3D printers for X, Y, and Z axi. Compatible with models like Creator 4, Creator 3 Pro, Guider 2S, etc. Please check your existing printer & switch to confirm compatibility with your particular printer.

Phrozen Sonic XL 4K & Mighty 4K LCD Screen

$280.00 +gst

Phrozen 9.3" 4K mono LCD Screen for Phrozen Sonic XL 4K & Mighty 4K Resin 3d printer.

This is a high quality durable screen designed to give you the best long lasting performance you can expect. If your LCD screen gets damaged, or you see the exposure affected, it might be time to change your LCD.

This is the masking LCD screen which projects the UV light layers for your 3d print. It is not the small touch screen panel used to control the printer.

Phrozen Vat for Lumii 3D Printer

$180.00 +gst

Phrozen Lumii 3d printer vat with FEP film installed.

This resin tray is for Phrozen Lumii DLP 3d printers.

Made from precision machined aluminum. Comes with brand new film preinstalled & ready to use.

Please remember to have a separate vat for intraoral in-mouth resins to avoid contamination & ensure patient safety.

Phrozen Lumii Build Plate

$160.00 +gst

Phrozen Lumii DLP 3d printer build platform. Please choose your size: Standard 130mm x 73mm, or Small 105mm x 73mm. Standard plate allows fitting more models, particularly suited for full arch sized parts. Mini is smaller, so slightly faster. It is well suited to Crown & Bridge 3d prints. If unsure, the standard build plate is a versatile option.

Phrozen Wash+ Dual Tank Washing Unit

$1,400.00 +gst

Phrozen WASH+ provides a versatile and efficient way for cleaning 3D-printed parts, allowing professionals to fulfill various washing requirements within a single, swift cleaning cycle. Equipped with a versatile dual tank system, you can utilize Wash+ to complete various washing procedures your workflow needs. Whether to perform a two-stage wash process, create a separate FDA and non-FDA cleaning operation, fill different liquids for engineering resins vs prototype prints, or employ both tanks to double your output, WASH+ is built to easily adapt to all your needs.

Creatbot D600 pro 2 D1000 Cartridge Heater

$40.00 +gst

Suitable for Creatbot D600 Pro 2 & D1000 3d printers. These are genuine Creatbot supplied 24V 60W cartridge heaters which can handle up to 450C reliably. Creatbot high temp hot ends support up to 420C so please be mindful the heater you use. These have short wires. Not suited for older D600s, F430, F160, or PEEK edition 3d printers. Standard Tube Cartridge Heater that slots inside the hot block. Has a small connector to plug on the board so its really easy to install.

Cratbot D600 pro 2 & D1000 hot end temperature sensor

Creatbot D600 pro2 D1000 Temp Sensor

$40.00 +gst

Loose contacts with the temp sensor can cause inaccurate readings, which compromises the accuracy of your plastic flow. With a new temp sensor, you ensure optimal temperature control for your Creatbot DX & DE machines. This means more accurate & stronger 3d prints without under-extrusion & layer delamination.

Creatbot D600 Pro 2 Hot End

$120.00 +gst

Hot End assembly for Creatbot D600 Pro 2 & D1000 3d printer. Please note this is not for previous D600 machines. It is not for F series machines or P series either. The hot end includes the mount block, the heat brake (throat tube) & a nozzle. We only sell Genuine spare parts, so you can rest assured they will work as expected & are built to the high standards that Creatbot supplies. These nozzles are individually turned for the main production process, not die casted like budget models. So you get accurate crucibles which offer better retraction control. The standard version prints up to 260C with a teflon lined heat brake. Perfect for common material like PLA, PETG etc. The high temp version handles up to 420C, & doesnt have a teflon liner, which makes it last longer when printing Carbon Fiber & other reinforced materials. Replacing hot ends is a great time to check if you also need a new temperature sensor (thermister or thermocouple), or a new cartridge heater. Please buy them from here: D600 Pro 2 temp sensor D600 Pro 2 cartridge heater

Phrozen Water Washable Tough Gray Resin

$120.00 +gst

Phrozen Tough Water Washable Grey Resin Get the strength of Tough Resins with the Ease of washing with just plain water. Our Tough Resin is now available in a Water Washable version. Traditional water-washable resin can be brittle. Our new Phrozen Water Washable Tough resin is formulated differently. It has double the strength of most water wash resins. It also has a bit of flex, which creates more durable models.

Phrozen Lumii DLP Dental 3D Printer Package

$7,800.00 +gst

Introducing the Phrozen Lumii DLP Premium 3D Printing Package, now available for dental professionals across New Zealand and Australia through 3D Printer Store. Whether it's 3D printing intraoral surgical guides, certified dental dentures, temporary crowns, detailed models, wax-ups, or even thermoforming aligners & retainers - the Lumii is equipped to handle every dental application with ease and precision. Though built mainly for dentistry, the Lumii system is also very capable in any ultrafine applications such as Jewellery making, including using wax castable resins & industrial resins. This cutting-edge solution combines precision, speed, and reliability, redefining what’s possible with DLP technology in dental applications, all at a price never seen before. Our premium package includes:

Phrozen Lumii DLP 3D Printer: Exceptional detail and accuracy for professional use.
Phrozen Wash+ Dual Tank Washer: Simplify cleaning and improve post-processing efficiency.
Phrozen Cure+: Ensure durable and precise high speed part curing.
Mini vat & Films: For faster 3d printing of crowns, surgical guides & chair side use.
Heated resin mixer: For optimum printing of resins in cooler weather - particularly C&B, Guide, & Aligner Resins.

Phrozen Tough 100 E (Polypropylene / Nylon like) Resin 1kg

$150.00 +gst

Phrozen Tough 100E Resin

Excellent resin for 3D Prints that need engineering properties of Nylon & PolyPropylene, such as high elongation before break, impact resistance & flexural strength. This resin offers very high inherent flexibility for bending / twisting applications, that other tough resin formulations can't offer. Tougher than most common resins on the market, & highly impact resistant. Tough 100E Green is the upgrade to Phrozen's successful Nylon Green Resin. Weight 1Kg

Phrozen Heat & Mix – Handsfree resin bottle mixer

$420.00 +gst

Why buy our 3D Printing Resin Bottle Mixer with Active Heating This is a bi-directional mixer - it doesn't just a roll a bottle like most consumer mixers on the market - it actually wobbles the bottle to shake it without bubbling the resin. Did you know that many common 3d print failures are related to the resin not being mixed properly or being too cold? Since most bottles are stored standing upright, it is very common for resin monomers & pigments to settle downward. So when you then use the resin, it has actually separated. This is why the resin needs to be thoroughly mixed. Simply shaking the resin bottle is not the best option, because shaking it induces bubbles & causes uneven coagulation of the chemicals. This bottle roller rotates resin bottles inside a heated chamber to mix the resin thoroughly. By heating the resin while it is being mixed, the nanoparticles that have settled are able to retake a uniform viscosity. Resins that are heated are less viscous & print much better than when the resin would be thicker. This mixer provides a consistent & easy solution to shaking the bottle by hand, as just shaking the bottle heavily can cause the resin to bubble rather than actually mixing correctly. With our heated resin bottle roller, you will greatly reduce print failures caused by the resin being too cold, particularly in winter. This mixer is particularly useful if you plan to 3d print high performance industrial engineering resins, wax castable resins, ceramic filled or dental resins.

Creatbot D series 1.75mm head conversion pack

$400.00 +gst

This package consists the entire extruder, hot end & connector systems of a Creatbot D 1.75mm head. It is mainly use to convert older 3mm D series 3d printers that used 2.85mm, over to 1.75mm filament. Works with Creatbot DX & DE series 3d printers.

Phrozen Mega 8K 15″ LCD Screen

$650.00 +gst

Genuine 15" 8K Mono LCD Screen for Phrozen Mega 8K series Resin 3d printers. This is a high quality durable screen designed to give you the best long lasting performance you can expect. If your LCD screen gets damaged, or you see the exposure affected, it might be time to change your LCD. Please specify which Mega machine you want it for in the order notes, whether it is Mega 8K, 8K v2, or 8K S. We will supply the correct screen accordingly.

high temp dissolvable support 3d print nz au

Creatbot S-350 Support Material

$159.00 +gst

Creatbot S-PAHT is a dedicated breakaway support filament optimised to work with high temp Nylons & Poly Carbonates. This gives you a smooth surface finish where the support is removed. This support material works well with our Carbon Fiber reinforced Nylons & Glass Fiber Nylons & PC-CF as well. If you print supports with the same material as the part, the area where support sticks is usually rough. Breakaway supports fix this problem by providing more contact while being easy to break off. Dual extruder 3d printers or multi material systems or AMS are required to use support materials.

Phrozen AnyCast 60% Wax Castable Resin – for metal investment casting

$240.00 +gst

Highesy Wax Content 60% Castable Resin

Best 3d print casting resin now at an excellent price!

We're happy to introduce the latest high wax content casting resin by Phrozen with 60% wax content. This resin offers similar results to the MJP casting resins used by most industrial foundry houses, so it integrates better with existing burnout processes. Anycast is optimised to allow even larger & heavier pieces that would sometimes leave behind porosity when casted with lower wax content resins. The prescribed burnout cycles have been developed with Prestige Optima Investment powder - one of the leading jewellery investments in the casting industry. Please see the Burnout schedule images for Traditional, Low temp as well as High temp cycles. Phrozen is revolutionising LCD 3D Printing resins by offering cutting edge formulations that provide better results than ever before at an amazing price point. Specially designed for jewellery casting, Phrozen’s Wax-like Castable Resins burn cleanly to provide reliable casting for all types of models, especially jewelry and any high precision dental parts. 1kg bottle of green 60% wax resin

Phrozen Post Processing Kit for Resin 3D Prints

$69.00 +gst

Why buy this kit?

Everything you need is with you from the start

It provides all the essential tools for pre-printing, post-printing, and environmental maintenance, ensuring every stage of the printing process is as smooth as it should be.

Diverse Scraper Choices

Multiple scraper options for different needs: a plastic scraper to clean your vat and a metal scraper to remove models from the build plate.

Resin Recycling Made Easy

Use the wire mesh and foldable funnel to make resin recycling quick and convenient.

Effortless Support Removal

Removing model supports is quick and easy, giving your models a smooth clean surface.

Keeping You Safe and Clean

Gloves, silicone pads, and cleaning cloths are included to keep your workspace tidy, and your hands protected from resin and chemicals. The kit contains:

Plastic scraper x1
Metal scraper x1
Silicone scraper x1
Clippers x1
Sandpaper x1
Wire mesh x1
Collapsable funnel x1
Brush x1
Gloves x1
Silicone mat x1
Cleaning cloth x1

Recycled PEEK 3D Printer Filament 1.75mm 3d4makers 200g

$139.00 +gst

R-PEEK 3D Printer Filament

This 3D4Makers PEEK filament is made in Netherlands using recycled PEEK. Recycled PEEK is generally made by collecting PEEK powder from CNC machine shops, which is then extruded into 3d printing filament. This means you get the exact same filament as normal PEEK, just being sourced sustainably because the powder that would have otherwise gone to waste has been reused to make filament. And, its half the price. PEEK handles continuous operating temperature of 260C & peak loading up to 320C. It has a strength to weight ration higher than Aluminum. And it has the resonance damping properties comparable to wood. Considered to be the best 3d printing material presently available in filament form. It is a natural beige peek product which will give you a base filament as close to natural peek machining block colour as possible. PEEK is the best material for anything functional & mechanical, that needs to perform as closely to a metal like aluminum as possible while still being a plastic that is 3d printable. So its the perfect choice for Gears, Screws, Cogs, even complex worm wheel assembly parts are fine. That includes Hinges & other loading applications. It is also ideal for electronics enclosures where the enclosure needs to offer electrical & heat insulation, strength, flame retardance & element resistance including wet or organic aqueous conditions. This makes it the ideal filament for medical applications like temporary implants, surgical guides, orthodontic reconstruction, maxillofacial surgery & many other use cases including aeronautical & aerospace. For demanding applications where all else would fail, PEEK is the KING of 3D printer materials. Strongest 3D Printing plastic available in 3d printing filament form. Handle up to 250C continuous operating temperature with Short term temperature performance up to 300 deg C. The most dense semi-crystalline polymer thats 3d printable, yet close enough to aluminium in many applications. Chemically resistant to most corrosive substances & high resistance to aqueous conditions. Used extensively in Aerospace & Automotive applications where you need mechanical strength even at high temperature. BioMedical material that can be used for the human body, dental implants, joint replacements, the list goes on. PEEK also has low resonance properties that are comparable to natural fibers such as wood, which is helpful when it comes to vibration & damping control. This reduces screws & fasteners loosening under load out of a peek enclosure. Since PEEK is expensive, we are offering small quantity rolls for our kiwi 3D makers who want to try this new cutting edge material. This is 0.2 KG of R PEEK 3D Printing Filament.

Phrozen LCD Frame Tape

+gst

This pre-cut and molded tape simplifies the installation of your LCD screen. This LCD frame sticker tape secures your printer's LCD screen after replacement. Why not just cut some pieces of tape instead of buying this? Its easy to take this tape for granted, but should it not be secure, your LCD screen can move mid print & thus reduce the resolution of the print across layers. Don't let your new LCD's performance go to waste. No need to cut the tape, just place it and secure your screen with ease.

Phrozen LCD Frame Tape 9.3″

$16.00 +gst

This pre-cut and molded tape simplifies the installation of your LCD screen. No need to cut the tape—just place it and secure your screen with ease. Tips:

Use this LCD frame sticker tape to secure your printer's LCD screen after replacement.
The tape is single-use; confirm its position before applying.
Press down evenly when applying the tape to avoid creases.
After installation, perform a Z-axis calibration test.

CreatBot Ultra PA-CF 25% Carbon Filled Nylon Filament – 1Kg

$179.00 +gst

Ultra PA-CF is our top-tier nylon 3D printing material, featuring a high-temperature nylon base reinforced with 25% chopped carbon fiber. This advanced material offers exceptional characteristics including low moisture absorption, superior strength, outstanding wear resistance, excellent chemical resistance, and remarkable heat tolerance. During the printing process, Ultra PA-CF maintains excellent dimensional stability and eliminates edge warping issues, making it an ideal choice for producing high-quality finished parts in various industrial sectors.

Phrozen RPG 3D Printing Resin

$129.00 +gst

Upgrade your tabletop experience with Phrozen RPG Resin and say goodbye to shattered miniatures mid-game. Engineered specifically for gamers, this resin ensures every detail of your models stands out while providing exceptional toughness and resilience. No fretting over accidental drops. Use super fine supports which can be removed easily, & dont leave behind blobs. No more cracked or chipped edges.

Advantages:

Enhanced Flexibility: RPG Resin’s superior flexibility and impact resistance mean your miniatures can handle intense gaming sessions without breaking. Built to Endure: Invest in RPG Resin for miniatures that last through countless games. Enjoy long-term savings and durability, reducing the need for frequent replacements. Sharp Details, Every Time: Experience detailed prints without compromising on strength. Phrozen RPG Resin delivers tough models with every intricate detail intact.

FlashForge Creator 3 Pro Hardened Steel Nozzle

$20.00 +gst

This is a Genuine FlashForge brand Hardened steel nozzle suitable to 3d print Carbon Fiber filaments as well as higher temperature materials. These hard nozzles are suitable for FlashForge Creator 3 PRO & Creator 4 series 3d printers. They will not fit the Creator 3 V2 or older Creator 3 machines with the long 1 piece nozzle type.

Creatbot extruder filament feeder Drive Gear cog

$25.00 +gst

This is the feeder gear that pushes filament inside the extruder on Creatbot F430, PEEk300, D600 Pro v1, & F160 series 3d printers. These cogs are made of hardened nickel stainless steel composite for optimum durability without being brittle. Most cheaper black feeders are made of carbide steel that can crack teeth & cause a jam in the hot end. This drive gear is mounted on the stepper motor inside the head. It is the cog that grips the filament & pushes it down the heat brake towards the hot end. Needs to be changed after a while when its teeth start to wear. Will wear more if using lots of Carbon or Glass Filled filaments.

Phrozen Special Fluffy Texture Changing Resin

$39.00 +gst

Phrozen Xmas special resin creates parts that can look as though they have a soft fluffy texture, like snow has fallen on them. It lets you create ornaments that look like they have snow flakes on them.

This is great for terrain landscapes on desktop D&D models. Also very useful if 3d printing props next to architecture projects that need to showcase snowy conditions.

It can simulate fluffy cotton like texture, which can help when making figurines.

Colour Changing - Phrozen Xmas 3D Printing Resin develops a white gradient effect when heated to 205°F/96°C with a mini heat gun, creating beautiful snowy effects on your model surfaces. Soft and Shatterproof Decor - Print out soft and shatterproof ornaments for a worry-free holiday.

Phrozen Flame Retardant Resin - Demo part

Phrozen Flame Retardant FR940 – 3D Printing Resin – 1Kg

$169.00 +gst

Phrozen Fire Retardant Resin - now in NZ

Excellent for 3D Prints with high precision & fire retardant requirements! FR940 is highly suitable for electronic and electrical uses, automotive parts, medical equipment, and other products that require a high level of flame retardancy while maintaining safety and practicality. Easy Post-Processing: Colouring, drilling and grinding are all suitable. Weight 1Kg Grey Colour Delivery in 2 weeks

Phrozen Cure Beam

$139.00 +gst

Smaller UV Curer Great for curing inside hollow resin prints so the inside cures fully.

Phrozen EL400 Flexible 3D Printing Resin

Phrozen Flex Resin EL400 Elastomeric Gray 1kg

$215.00 +gst

Phrozen EL400 is a durable rubber-like, highly elastic, tear-resistant flex resin which offers elastomer properties comparable to traditional flexible plastics like Polyurethane. With shore hardness of 70-75A and 391% elongation, EL400 offers the optimal blend of elasticity and toughness for printing production-grade elastomer prototypes.

Phrozen Mega S Wash & Cure bundle

$2,100.00 +gst

Phrozen MEGA S - Washer & Curer Combo

Large 3d prints need proper cleaning & curing. So you've got yourself a nice big 3d printer.. but you need a good wash & cure process for your resin 3d prints to give you the end results you expect. The Phrozen Mega S Washer has a large 30L capacity & allows the entire build plate to be washed inside it. Without touching the model, you can simply place the entire plate & let the washer do everything for you. No mess, no need to touch the resin. Once cleaned, the models are ready to be cured in the bundled Mega S Cure. The Phrozen Mega S Curer comes with 30 X 30 X 35cm chamber size designed to complement 15" LCD 3d printers like the Phrozen Mega 8K. With 405nm UV lights and a 360-degree rotating stand, Phrozen S Cure Mega cures large prints or multiple smaller-sized models reliably, regardless of size. Without proper washing & curing, prints can easily fail or feel sticky to touch. Don’t let your models fail at this crucial stage. Wash without hassle, & Cure your models in the chamber with a click of a button.

Matter & Form MAF Three 3D Scanner – Scan All Sizes Accurately

$2,599.00 +gst

Matter And Form MAF 3 latest 3D Scanner launched

We are proud to present the Matter & Form THREE 3D Scanner to New Zealand. This scanner is so revolutionary, that it has replaced every other 3d scanner we offer. Why is the MAF3 a ground breaking 3d scanner? Its Auto Focus variable lenses allow for it to precisely set capture distance, allowing this scanner to capture everything from a Coin to a Car with ease. No other single device in the 3d scanning market is able to do this. And secondly, this scanner does it without relying on a laptop with a GPU that costs the earth. Everything is done on its own hardware. A standard PC, tablet, or a phone can drive this scanner. You can Control your Accuracy, Resolution & Working Distance based on your requirements. Works with any device that has a browser. No need to buy a laptop that costs more than your scanner. Connect it to a turntable if you want to. Or use it off a tripod to take stills from any location, all around the object. This is the next evolution of 3D scanning & the industry has been waiting a long time for something as simple as this.

Phrozen Aqua Hyperfine 3D Printing Resin Graphite

Phrozen Aqua Hyperfine – Ultra High Resolution Resin – Graphite 1Kg

$110.00 +gst

Phrozen Hyper Fine Graphite Ultra High Resolution Resin 1 Kg

Carrying on the tradition of being the First to Bring into New Zealand all these new cutting edge Resin Products, we are proud to introduce the Phrozen Aqua Hyper Fine resin that is optimised for the latest high resolution 3D Printers including those supporting 14K, 16K & up. It has the smallest photo-initiater particles we have ever had before in any 405nm resin before. This makes for sharper details & sharper corners than ever before, thanks to the new Sonic 14K & 16K resin 3d printers. Whether you want 30mm miniatures with facial expressions visible, gears with teeth that actually fit & work, or making precision jewellery models, the Aqua 14K will take your breath away. The new Aqua-Grey 14K is a special high resolution resin that offers the best performance possible on 4K, 8K, 12K & 14K 3D Printers. It provides excellent surface finish with almost no ringing or layer lines visible. This resin will yield fine details accurately thanks to smaller nanoparticle size. It will also print at fast speeds, like other Phrozen Aqua series resins. 1Kg bottle of Phrozen Aqua Hyper Fine Graphite Resin ready to ship NZ wide.

Phrozen Mighty Revo 16K LCD Resin 3D Printer

$2,300.00 +gst

Phrozen Sonic Mighty 16K REVO 3D Printer

Our beloved Phrozen Mighty has just been upgraded. 16K LCD Heated Chamber Wifi, camera, Print Failure detection Vat residue detection Unmatched resolution All the smarts you could possibly want in a medium sized resin 3d printer are incorporated in the Phrozen 16K Revo, making it the most sophisticated 3d printer on the market in this class. A truly Revolutionary 3D Printer thats affordably priced yet professionally capable. Build Volume 224 x 127 x 235 mm high Super High Resolution down to 14 microns. The intuitive design of Sonic Mighty makes it suitable for everyone including beginners. And with the Heated Chamber you can 3d print sophisticated materials beautifully. With a Monochrome LCD, you get a longer life screen as well as build speed thats up to 3 times faster than standard MSLA 3d printers on the market. Pair it with the new Phrozen Wash & Cure Kit for perfect resin 3d prints time & again. Check our our Mighty Revo package. Happy Resin 3D Printing! Full Tech Specs below:

Magigoo HT 3D Printing Glue for High Temp PEI, PEEK, etc

$79.00 +gst

Magigoo HT adhesive is designed to provide bed adhesion with challenging materials like PEI Ultem, PEEK, PEKK, PPS, PSU, PPSU etc. It can be used with all kinds of bed surfaces, however we recommend PEI or Garolite. It can also be used with Carbon Fiber reinforced filaments & Glass Filled materials, like PPS-CF, PEI-CF & PEEK-CF etc. To 3D Print Nylon, we recommend Magigoo PA as a first choice, & if that doesn't suit well for your particular filament, then try this Magigoo HT. For common materials like PLA, ABS etc, we recommend buying the Magigoo original glue. Magigoo glue reduces warping in FDM 3D printers. Warping is caused by the differential cooling of a print during a 3D printing process made up of layers. For printing advanced materials reliably, apply a thin layer of Magigoo on your print bed before printing. This will ensure a successful print. If too much glue has been lacquered on, please wipe with a damp sponge & then reapply glue.

Functional Engineering 3D Printing Resins New Zealand Australia

Engineering Resin bundle

$899.00 +gst

The Ultimate Engineering Resin collection

The Best Functional resins we have come across are in this collection. If you want to 3d print more than just pretty looking parts, this package will give handle every possible Engineering application you can think of. Materials included are: Onyx Impact Resin PC-GF Glass Filled Poly Carb simulating Resin Nylon like Green Resin TR300 high temp resin Wax Casting Resin Rubber Flexible Resin Flame Retardant Resin Resin cleaning liquid (Alcohol free, safe, non-combustible)

Phrozen Rigid PC GF Resin – like Glass Filled Poly Carbonate

$99.00 +gst

Rigid PC/GF is a Black Engineering grade resin that is designed to simulate Glass Filled Poly Carbonate. It offers precision and durability with excellent heat resistance. It’s perfect for prototyping, electronics & automotive components, and other industrial applications.

Benefits

Great Details With High Dimensional Stability: Perfect for applications with intricate details, such as enclosures & cases.
High Heat Resistance.
High Wear Resistance: it’s suitable for functional, mechanical parts.
Good Chemical resistance
Industrial Printing Capability: Exceptional printing capabilities for mass productions, on par with injection molding for general-purpose engineering plastics.
Strong, Robust Material: Providing robust rigidity and hardness, it’s durable even for continuous usage.

SD Specs below

F430 Extruder Head Miniboard

$69.00 +gst

This is the small PCB that goes behind the extruders of a Creatbot F430 head. The main ribbon cable connects to it from the motherboard underneath the machine. And other connectors such as the temp sensors, cartridge heaters, probe etc plug into this little board.

eSUN PLA+HS High Speed PLA+ White (Milky White)

$33.00 +gst

Esun High Speed PLA Plus 1Kg Warm White 3D Printer Filament now in NZ

PLA+ HS is the new version of the PLA+ you love, now with High Speed 3d printing capability! Get the higher flexibility, impact strength & easy to remove supports that you like about PLA+, not with any 3d printer including Bambu labs, Creality K1, Phrozen Arco etc. As easy to print as standard PLA+ & yet highly functional, PLA+HS is the future of PLA. PLA is naturally sourced, compostible & bio-degradable. It is the easiest material to 3d print. Our range of eSun PLA+HS colours is growing everyday. This is the eSun Warm White.

Sale!

Esun PLA+HS High Speed PLA+ Black Filament

+gst

Esun High Speed PLA Plus 1Kg Black 3D Printer Filament now in NZ

PLA+ HS is the new version of the PLA+ you love, now with High Speed 3d printing capability! Get the higher flexibility, impact strength & easy to remove supports that you like about PLA+, with faster build speeds on any 3d printer including Bambu labs, Creality K, etc. As easy to print as standard PLA+ & yet highly functional, PLA+HS is the future of PLA.

Phrozen Sonic Mighty 8K LCD Screen

$280.00 +gst

Genuine 10" 8K Mono LCD Screen for Phrozen Mighty 8K Resin 3d printer. This is a high quality durable screen designed to give you the best long lasting performance you can expect. If your LCD screen gets damaged, or you see the exposure affected, it might be time to change your LCD. This is the masking LCD screen which projects the UV light layers for your 3d print. It is not the small touch screen panel used to control the printer.

Phrozen ACF Films – 3 Pack – 290mm x 210mm A4 Mighty 10″

$120.00 +gst

Latest ACF Film for 10" LCD Resin 3D Printers - Pack of 3 films The new Phrozen ACF film is designed with a non-stick and smoother film surface for more efficient 3D printing. Compared to FEP and PFA (nFEP) film, the ACF film features a better release, reducing the printing time and increasing the success rate. ACF is the strongest, & has the highest tear tolerance. It also has the lowest peel force so suction forces are minimised & you have the best print possible. NFEP film (also called PFA Film) is better than the old FEP film to reduce suction forces. ACF takes this to a whole new level. ACF film is the best choice for printing high performance engineering resins such as the Onyx series, Henkel & BASF industrial series, etc. It is a signifcatly better non-stick surface so it reduces peel forces greatly. So parts are less likely to stick to film or pop off from the build plate. This FEP Film is suitable for slightly bigger printers like Phrozen Mighty 8K, Mini 8k, Phrozen Sonic XL, Epax E10, Anycubic Mono, Elegoo Saturn etc Can also work with smaller DLP LCD 3D Printers, simply cut the sheet in half & you have 2 FEPs! This will work with Metal or Plastic vats. Very easy to use. Simply open the screws on your vat, remove the old FEP sheet, & put this sheet in place. Please see the video below to see how easily you can change the FEP on your Phrozen Sonic Mini Resin 3D Printers. You should change your FEP film when its cloudy, has excessive scratches, or you find the prints stick to it too easily rather than the bed. Depending on several factors, this is usually around 200 hrs of use. FEP is like a car tire, you can have the best mechanics but without a good tyre, you're asking for trouble. We keep our prices on consumables cheap to help kiwis get the best results with 3d printers without prolonging the need to replace important components. Also check out the PlateBond Adhesion Promotor to help your base layers stick better to the bed of your resin 3d printer.

LCD Screen protector for Resin 3d printers

Phrozen LCD Screen Protector

+gst

This screen protector is made of durable and high-transparency material to protect your LCD screen from the risk of resin spilling & damaging your LCD screen. This works beautifully without affecting your prints.

Just relevel your bed after you stick it on the lcd screen of your resin 3d printer & you are good to go. And if resin gets spilled or there is any damage, simply peel it off from the screen & put a new one on.

Works will all popular brands of 3d printers including Phrozen, Creality, Elegoo, Anycubic etc.

Phrozen Light Curing Putty – 3d print filler

$39.00 +gst

Restore broken parts to their original shape. Fill gaps and holes in models. Easy to sand and paint on after curing. Applicable on cured resin and plastic.

Phrozen Aqua 8K Vanilla High Resolution Resin

$99.00 +gst

Phrozen Aqua Vanilla 8K High Resolution Resin 1 Kg

Carrying on the tradition of being the First to Bring into New Zealand all these new cutting edge Resin Products, we are proud to introduce the Phrozen Aqua 8K vanilla resin. Its perfect for detailed organic sculpting, archaeology, & medical models where you might want its human skin / bone like colour. This makes for sharper details & sharper corners then ever before, particularly on high resolution Phrozen 8k resin 3d printers. Whether you want 30mm miniatures with facial expressions visible, gears with teeth that actually fit & work, or making precisision jewellery models, the Aqua 8K will take your breath away. The new Aqua vanilla 8K is a special high resolution resin that offers the best performance possible on 8K 3D Printers. It provides excellent surface finish with almost no ringing or layer lines visible. This resin will yield fine details accurately thanks to smaller nanoparticle size. It will also print at fast speeds, like other Phrozen Aqua series resins. This is the perfect resin for figurines with organic detail, jewellery pieces, or complex engineering parts with minute detail, tight tolerances or fit requirement. It supports a high speed layer curing when 3d printed on our new Phrozen Monochrome LCD powered 3D Printers like the Sonic series. And it has a special low shrinkage formula meaning that small parts exhibit almost zero shrinkage in most applications. 1Kg bottle of Phrozen Aqua 8K Resin.

Creatbot F USB reader board with adapter

$80.00 +gst

This is the USB reader board used on a Creatbot F430 & F160 3d printer. This is the Latest version board with an adapter to allow certain older printer models to also be able to use it.

Phrozen Water Washable Resin Gray 5Kg

$399.00 +gst

Phrozen Gray Water Washable Resin - Now in New Zealand!

Phrozen ABS Like Water Washable Resin is designed to suit most SLA style LCD UV 3D Printers. Probably the best water washable resin in New Zealand! Low Viscosity & Low Odour make for it very easy to 3d print with. Non-Brittle, Flexible, Strong resin. Phrozen Water Washable Resin is very hydrophilic so its easy to clean the model & the build area with just plain water. You can also fill plain water in your wash & cure unit instead of IPA. This Phrozen Resin is optimised for all popular 405nm LCD 3d printers including Phrozen 3D Printers, Anycubic, Wanhao, Creality, Elegoo, Longer etc Faster Printing now possible on all 3d printers. Very fast Cure time as low as 1.5 seconds per layer on Phrozen's own Sonic 3d printers at 50µm Medium Grey Colour Weight: 5 Kg bottle In stock right here in Auckland & ready to ship.

Phrozen TR250LV High Temp Resin 5Kg

$449.00 +gst

Phrozen High Heat Functional Resin - now in 5Kg Jugs

TR250LV High Temp Resin is excellent for 3D Prints with high precision & high temperature resistance up to 100 C! Tougher than most common resins on the market, for a very affordable price thanks to the large 5kg cans. EASY POST-PROCESSING: Coloring, drilling and grinding are all suitable. A great choice for vulcanized rubber molding process, such as jewelry casting, GK kit, and all other high-heat applications, thanks to high temperature resistance and hardness. Perfect for vacuum forming. And very good for orthodontic use in thermoforming aligner & retainer templates. Low viscosity, allows for high speed printing. Weight 1Kg Grey Colour

3D Filament Spool Holder External Roller

$15.00 +gst

These simple external filament rollers can be used to put filament rolls of any size outside your printer & feed into the 3d printer. Great to load 3kg spools of filament into smaller printers. This works easily with rolls of any size including 1kg, 3kg, 5kg etc. The bearings allow rolls to turn freely, regardless of weight. The 2 pieces can be placed as far or as near as possible, based on the width of the rolls. Particularly useful for small light weight 3d printers which would otherwise topple when a heavy roll was mounted on them.

3D Printer Shop

Vacuum Forming (1)

3D Print Service (5)

3d printer repair service NZ (3)

Brands (141)

3D Printing Resin (39)

3D Printers (16)

3D Printer Parts & Accessories (75)

3D Printing Bundles (5)

3D Printing Filament (63)

3D Scanners (1)

Phrozen MEGA S Washer

PETG Translucent Rainbow

PETG Rainbow – Aurora Blue Purple

PLA Gradient Winter White

Phrozen Tough 100E Resin

Highesy Wax Content 60% Castable Resin

R-PEEK 3D Printer Filament

Advantages:

Phrozen Fire Retardant Resin - now in NZ

Phrozen MEGA S - Washer & Curer Combo

Matter And Form MAF 3 latest 3D Scanner launched

Phrozen Hyper Fine Graphite Ultra High Resolution Resin 1 Kg

Phrozen Sonic Mighty 16K REVO 3D Printer

The Ultimate Engineering Resin collection

Esun High Speed PLA Plus 1Kg Warm White 3D Printer Filament now in NZ

Esun High Speed PLA Plus 1Kg Black 3D Printer Filament now in NZ

Phrozen Aqua Vanilla 8K High Resolution Resin 1 Kg

Phrozen Gray Water Washable Resin - Now in New Zealand!

Phrozen High Heat Functional Resin - now in 5Kg Jugs