3D Printer parts in NZ
-
Deli is an affordable versatile glue stick that works really well on all bed surfaces for all 3d printers. PLA, ABS, ASA, Nylon, HIPS etc will benefit from glue particularly on glass beds. You will need glue when 3d printing with Nylon, Carbon Fibre, PolyPropylene, & other Engineering materials that don't like to stick to other surfaces. Applying glue greatly reduces warping from all materials. You can start with this cheapest glue stick, & then move to get more specialised glue sticks from our collection of bed prep adhesives. Just apply a thin layer of this glue on a warm build surface, & print directly on it. Please take care that if printing directly on glass beds then some materials can crack the bed when taking it off after using glue. We recommend you buy a PEI sheet first rather than directly on glass or ceramic. This is a PVA based glue that easily wipes off with a damp cloth. Reapply only as needed. Less is more with Glue when used for 3d printing. 36g glue stick
-
Hinges used for many Creatbot 3D Printers. Fits newer version of Creatbot DX, DE & also some versions of F160. Used with the clear plastic panels used on doors. 1 piece. Please buy as many as you need. Standard 40mm hinge that can work for many other applications.
-
Pulley for the belt rail system on Wanhao i3 & similar 3d printers. Will work on i3 plus as well new i3 plus mark 2. Is also compatible with many other 3d printers, but please check to be sure.
-
Painter Paper Tape - Good quality specially sourced for NZ conditions
The secret to excellent 3d printing is that the first layer of your part should stick perfectly to your bed. But with so much confusion around what is best, from hair sprays to abs slurries, what really works well? ANd there are so many rolls of paper tape too, which one should you get? We've done a lot of testing, looked at branded as well as OEMs, & finally selected this one. Start with a roll of this tape. It is the most versatile 3d printing bed material & can be used with PLA, ABS, PETG, NinjaFLex, Poly Carbonate, Metal fills & even Carbon fibre. It also helps with levelling beds when metal beds slowly start to warp. Its easy to discount something so cheap, but try it & you will be impressed.. This inexpensive tape will last a long time & is easy to replace. -
Best Tool for 3D Print Cleanups
These are jewellery grade snipping cutters. Great product for a top price - now in NZ, dont pay upto 200% more.. They are great to remove tiny bits of plastic or some support material without hurting yourself. This humble tool might look like any ordinary cutter, but its much more! The blades sharpened edges are at a horizontal angle & designed to cut close to the part surface. The spring loaded handles allow for careful & controlled cutting. The thin tip allows cleanup in harder to reach places. It is also excellent to cleanup the nozzle without hurting yourself. Try this excellent tool out - you will be impressed! Please note the colour is random, it can be either Red, Blue, Yellow, Orange. -
Linear Bearing with outer plastic cover & mount holes. Fit the extruder rail assembly on Wanhao i3 & similar 3d printers. Can also be used as platform bearings. Will work on i3 plus as well new i3 plus mark 2. Is also compatible with many other 3d printers, but please check to be sure.
-
Suitable for FlashForge 3D Printers including Adventurer , Finder, Inventor, Guider & similar 3d printers.
-
Extruder Circuit Board for FlashForge Adventurer 3 3D Printers
-
Genuine Creatbot door handles. These are the slim thin silver coloured aluminum door handles on newer Creatbot 3d printers with hinged doors. They are the smaller size (approx 80mm long), which are used for DX, DE, F160. They are also used on the rear chamber doors of the F430. These are attached to the Acrylic doors on the D series, & corresponding door frames on F series machines.
-
Genuine Wanhao Branded lower metal sheet to be stuck on the printer platform, on which you can then use magnetic mats & magnetic sensors. This is used on Wanhao i3 Mk2 (also called i3 v2) 3d printers, the new version of D5s, & other such machines. This is not the actual print surface, its the metal sheet on which the build surface sticks magnetically. For older version of the i3 please buy the other BuildTak style bed mat which has glue on one side. Works extremely well for most materials like PLA, ABS & PETG.
-
Genuine FlashForge nozzle for the FlashForge Guider 2S 3D Printer. It is common for nozzles to wear or block after a period of use, & need replacing. Simply unscrew the existing nozzle & screw the new one on, easy. Please remember to always heat your hot end before removing your nozzle.
-
This pre-cut and molded tape simplifies the installation of your LCD screen. No need to cut the tape—just place it and secure your screen with ease. Tips:
- Use this LCD frame sticker tape to secure your printer's LCD screen after replacement.
- The tape is single-use; confirm its position before applying.
- Press down evenly when applying the tape to avoid creases.
- After installation, perform a Z-axis calibration test.
-
This is an inductive sensor for 3d printers like Wanhao i3 plus mk2, D6, & D9. It will suit most other 3d printers that use magnetic proximity sensors for bed levelling. Or for any other applications where a magnetic sensor is used for proximity, detection, limit switching etc.
-
Head board for 3d printers like Wanhao i3 plus mk2, D6, D9, D9 mk2 etc. This is the little PCB that sits on top of the main head where you plug in the heater, temp sensors, etc.
-
These are the drivers used to drive the stepper motors on Creatbot 3d printers. They are used for the X Y Z axi motors as well as for the Extruder motors. Different drivers have been used for the X Y axi as well as for the Z & E1 / E2. Please choose the correct model number. If the model you have is not listed, please contact us & we will set it up for you.
-
This pre-cut and molded tape simplifies the installation of your LCD screen. No need to cut the tape—just place it and secure your screen with ease. Tips:
- Use this LCD frame sticker tape to secure your printer's LCD screen after replacement.
- The tape is single-use; confirm its position before applying.
- Press down evenly when applying the tape to avoid creases.
- After installation, perform a Z-axis calibration test.
-
This is a temperature sensing thermister for Wanhao i3 3d printers. The thermisters for bed & nozzle are the same, however the wire length is slightly different. Please specify if you want one for the head, or for the nozzle. Please also specify which wanhao i3 3d printer type it is for: i3, i3 v2, i3 plus, i3 plus mk2, or i3 mini.
-
Genuine Creatbot brass nozzle for 1.75mm 3d printers. Will suit all Mk8 head 3d printers including all the Creatbot F series 3D Printers we sell: Creatbot F160, F160 PEEK, F430, F430 PEEK edition, PEEK-300, & D600 Pro 3d printers Our nozzles are individually Machined (not die casted & pressed like cheaper nozzles). The internal orifice & crucible shape of the nozzle is carefully manufactured, meaning you get less jams & clean flow without ripples. They will out last most cheaper nozzles on the market, & provide more consistent & reliable feeding as the diameter is accurate. These nozzles will work fine with all Mk8 thread extruder hot ends. So no matter your 3d printer, try out a higher quality nozzle that causes less problems & needs less changing. We stock a wide range of nozzle diameters 0.2, 0.3, 0.4, 0.6, 0.8 & 1mm. Please choose your size from the dropdown. We also sell Stainless Steel & hardened Martensitic steel nozzles which are superior to brass nozzles as they last longer. We recommend martensitic nozzles for Carbon Fiber 3d printing. And in general, Stainelss steel nozzles are better than brass even for general purpose 3d printing including using with Wood PLA.
-
Standard Tube Cartridge Heater that slots inside the hot block. Has long wire leads. Suitable for all Creatbot D series 3d printers including DX , DX Plus, DE , DE Plus for all single, dual or triple head models.
-
Suitable for all Creatbot F series 3d printers including F430, F160, & their PEEK edition 3d printers. Standard Tube Cartridge Heater that slots inside the hot block. Has a small connector to plug on the board.
-
Genuine Creatbot Throat Tube which connects onto the heat sink on top & the nozzle goes at the bottom. If you have replaced nozzles & still find there are extrusion issues, please consider changing this part. This tube is considered part of the heat break mechanisk, & has a partial teflon coating on the top to aim smooth extrusion. So it is recommend you change this tube as needed for the best uniformity in extrusion as well as reduction of jams or blockages particular in longer 3d prints. Will suit all Creatbot D series 3D Printers we sell including DM, DX, DE, the Plus versions, & the older D600 3mm machines
-
Genuine Creatbot Throat Tube which connects the hot block into the extruder mechanism. This is the teflon tube lined version which makes it easy to print PLA, PETg etc thanks to the teflon liner. But it will only operate up to 260C, please do not print hotter than that else you will damage the teflon liner. The heat sink & the nozzle is attached at the bottom of this piece. If you have replaced nozzles & still find there are extrusion issues, please consider changing this part. This tube is considered part of the heat break mechanisk, & has a partial teflon coating on the top to aim smooth extrusion. So it is recommend you change this tube as needed for the best uniformity in extrusion as well as reduction of jams or blockages particular in longer 3d prints. Will suit all Creatbot D series 3D Printers we sell including F160, F160 PEEK, F430, F430 PEEK, D600 PRO (not the older D600)
-
Genuine Creatbot Throat Tube which connects the hot block into the extruder mechanism. This is the Full Matal hot end which doesn't have a teflon liner inside, allowing you to easily print Carbon Fiber as well as high temp materials up to 450C. If you are new to 3d printing, you might find it useful to start with the other Teflon lined heat brake version as it can be easier to print common materials like PLA & ABS with that one. The heat sink & the nozzle is attached at the bottom of this piece. If you have replaced nozzles & still find there are extrusion issues, please consider changing this part. This tube is considered part of the heat break mechanisk, & has a partial teflon coating on the top to aim smooth extrusion. So it is recommend you change this tube as needed for the best uniformity in extrusion as well as reduction of jams or blockages particular in longer 3d prints. Will suit all Creatbot D series 3D Printers we sell including F160, F160 PEEK, F430, F430 PEEK, D600 PRO (not the older D600)
-
This is a Genuine FlashForge brand nozzle for FlashForge Creator Pro 2 IDEX 3D Printers. It is common for nozzles to wear or block after a period of use, & need replacing. Simply unscrew the existing nozzle & screw the new one on, easy. Please remember to always heat your hot end before removing your nozzle.
-
This is the mat that sticks onto the spring steel build plate, which adheres on the magnetic 3D Printer bed of 3d printers like FlashForge Creator 3, 3 Pro & 3 Pro v2 . It can also be used on any 3d printer that has a 300x250mm build volume & you want a good quality surface mat. This item is only the top build tak style mat, that you can 3d print on. The photo is to show you how the mat is to be used in relation to a Creator series 3d printer. This is a sticker, it has glue on 1 side, just peel it & stick it onto any surface. It is a Polycarbonate re-inforced build surface that provides excellent adhesion to most common materials. However, for Nylon based materials, it will be best to put a thin layer of the glue stick on it. Some Flashforge mats are blue, & some are black - they are exactly the same mat, flashforge just changed colours between the machine releases.
-
This is a Genuine FlashForge brand Hardened steel nozzle suitable to 3d print Carbon Fiber filaments as well as higher temperature materials. These hard nozzles are suitable for FlashForge Creator 3 PRO & Creator 4 series 3d printers. They will not fit the Creator 3 V2 or older Creator 3 machines with the long 1 piece nozzle type. 0.6mm nozzle diameter is recommended for Carbon Fiber, Glass, & Wood based filaments as it reduces chances of blockages & under-extrusion over longer prints. These nozzles also double or triple your effective throughput, thereby allowing your 3d prints to be completed much faster, usually 2 to 3 times faster! Hardened nozzles are the best type that do every kind of 3d printing really well. Simply unscrew the existing nozzle & screw the new one on, easy. Please remember to always heat your hot end before removing your nozzle. Please choose your size, else we will send a 0.4mm by default.
-
Phrozen screen protector is made of durable and high-transparency material to protect your LCD screen from the risk of resin spilling & damaging your LCD screen. This works beautifully without affecting your prints. Just relevel your bed after you stick it on the lcd screen of your resin 3d printer & you are good to go.
-
This is a temperature sensing Thermocouple for Creatbot D series 3d printers. They will fit all Creatbot DX & DE machines bought since 2015.
-
Buildtak style Bed Mat designed for the Creatbot F160 & F160 PEEK 3d printer. This is a simple, easy to apply stick on mat that sticks on the bed of the 3d printer. It can even stick on an existing buildtak. Just peel the bottom & use like a sticker. Great adhesion for common materials like PLA, ABS, PETg, TPU. For a high wearing setup you can buy our matching Carbon Fibre Metal Plate to setup a removable bed system.
-
This is a temperature sensing Thermocouple for Creatbot F series 3d printers. They will fit all Creatbot F430 & F160 3d printers.
-
This is a temperature sensor for the newer FlashForge Creator Pro 2 & Creator 3 Pro 3d printers. It is a threaded type that fits into the hot end block. This is not for older flashforge Creator series printers.
-
This is a 24V DC radial fan used as the part cooling fan on Creatbot F430 & F160 3d printers. It is mounted to the side of the extruder 1 (between 1 & 2 if its a dual extruder machine) & plugs into the top extruder board above the head.
-
This is the feeder gear that pushes filament inside the extruder on Creatbot F430, PEEk300, D600 Pro v1, & F160 series 3d printers. These cogs are made of hardened nickel stainless steel composite for optimum durability without being brittle. Most cheaper black feeders are made of carbide steel that can crack teeth & cause a jam in the hot end. This drive gear is mounted on the stepper motor inside the head. It is the cog that grips the filament & pushes it down the heat brake towards the hot end. Needs to be changed after a while when its teeth start to wear. Will wear more if using lots of Carbon or Glass Filled filaments.
-
Genuine Creatbot second generation nozzles. Will suit all Creatbot D series 3D Printers we sell: DM, DX, DE & Plus versions We stock a wide range of nozzle diameters: 0.4, 0.6, 0.8, 1.0 mm
-
A4 Size NFEP Film for medium size SLA Resin 3D Printers NFEP film also called PFA Film is better than standard FEP film to reduce suction forces. It is basically a better quality of the non-stick surface so it reduces peel forces. So parts are less likely to stick to film or pop off from the build plate. This FEP Film is suitable for slightly bigger printers like Phrozen Sonic XL, Phrozen Mighty, Epax E10, Anycubic Mono, Elegoo Saturn etc Can also work with smaller DLP LCD 3D Printers, simply cut the sheet in half & you have 2 FEPs! This will work with Metal or Plastic vats. Very easy to use. Simply open the screws on your vat, remove the old FEP sheet, & put this sheet in place. Please see the video below to see how easily you can change the FEP on your Phrozen Sonic Mini Resin 3D Printers. You should change your FEP film when its cloudy, has excessive scratches, or you find the prints stick to it too easily rather than the bed. Depending on several factors, this is usually around 200 hrs of use. FEP is like a car tyre, you can have the best mechanics but without a good tyre, you're asking for trouble. We keep our prices on consumables cheap to help kiwis get the best results with 3d printers without prolonging the need to replace important components. Also check out the PlateBond Adhesion Promotor to help your base layers stick better to the bed of your resin 3d printer.
-
Best Quality Creatbot Hardened Martensitic Steel nozzle for 1.75mm 3d printers to print high temperature & composite reinforced materials. Perfect for 3d printing Carbon Fiber, Glass Fiber, Kevlar, etc on Creatbot F430, F160, PEEK300 & D600 Pro 3d printers. Martensitic Steel nozzles are the best nozzles presently avaialble. They are the most durable nozzles compared to brass or stainless steel. Hardened martensitic steel allows much cleaner retractions than brass nozzles, which interestingly also improves the overall print quality. These nozzles can be used with Carbon Fiber filaments, however please be advised 0.4mm is on the edge, its a bit small for carbon to flow through well. Milled Carbon Fiber Nylon when printing small parts should be ok, but for larger longer prints, recommend using 0.6mm nozzles. These are well suited particularly for advanced materials that print at ultra high temps like PEEK, PEI Ultem, PPSU etc. Our nozzles are individually machined for optimum precision & longer life (not just die casted like cheap nozzles). Will suit all Creatbot F series 3D Printers we sell: Creatbot F160, F160 PEEK, F430 & F430 PEEK edition 3d printers We stock a wide range of nozzle diameters 0.3, 0.4, 0.6, 0.8 mm Our nozzles can also be used with other Mk8 compatible 3d printer heads.
-
This is a magnetic slide on base plate for FF AD3 3D Printer. Its got an excellent buildtak surface on it which provides excellent part adhesion & good surface finish. The metal sheet is removable & slides into the bed & gives you a new build surface to 3d print on. Its good to replace these plates as & when needed to get optimal auto correction & auto level to work, depending on how much 3d printing you are doing.
-
Restore broken parts to their original shape. Fill gaps and holes in models. Easy to sand and paint on after curing. Applicable on cured resin and plastic.
-
The Teflon feed tube to connect the extruder to the head on Creatbot D series 3d printers like the Creatbot DX, DE etc. Includes the brass studs that the tube plugs into & locks into place. Screws on the head end & the extruder end. No assembly needed. Available for 3mm filament as well as 1.75mm filament based Creatbot D series machines. Please specify filament diameter, otherwise the default 3mm compatible tubes will be sent as they are more common. If your lugs break off, please consider buying this 1 piece ready tube.
-
These relays are used in many 3d printers including the Creatbot F430, D600 & PEEK300. Usually they are used for the Bed heater or the Chamber heater. Please select which relay you want from the list. The triger voltage is 3-32V DC. Please pick the correct type. Be sure before you install it. Relays blow instantly if you get the trigger voltage wrong, or connect the wrong end into the wrong point.
-
Easy switch nozzle & hot end assembly for the FlashForge Adventurer series 3D Printer. These nozzles work on Adventurer 3 & Adventurer 4 series 3d printers. 0.4mm nozzle diameter. Will work with old & new Adventurer 3, 3 lite, 3 Pro, 4 Pro 3d printers. For Adventurer 5M series please buy the other nozzle. This is a superbly easy to use, unique system that allows you to quickly switch the nozzle, & heater block without any assembly. Just press the clamps on the sides of the head to push this assembly out, & then insert a new one in. They are avilable in 2 temperature options; 240C & 260C. As well as in 2 different sizes, 0.4mm & 0.6mm. These nozzles are stainless steel, so wear much lesser than brass nozzles.
-
Sale!Kid friendly 3D Printing Pen This 3D Printing Pen is specially made for children's hands and works with filaments at a lower temperature than regular 3D pens. It allows for children to explore their creative side safely. The pen works with special filaments that work at just 50C (the same as standard hot water tap). It comes with template sheets, so kids can trace on them & then fold onto a 3d object. Makes it really easy to start making 3d models without having to fully visualise each side. A bit like a Lego instruction booklet you can follow, before you make your own. Suitable for PCL Filament which is low temperature. This pen is not for higher temperature filaments such as PLA etc. For PLA or similar, please buy our standard version 3d pen.
-
Latest ACF Film for 10" LCD Resin 3D Printers The new Phrozen ACF film is designed with a non-stick and smoother film surface for more efficient 3D printing. Compared to FEP and PFA (nFEP) film, the ACF film features a better release, reducing the printing time and increasing the success rate. ACF is the strongest, & has the highest tear tolerance. It also has the lowerst peel force so suction forces are minised & you have the best print possible. NFEP film (also called PFA Film) is better than the old FEP film to reduce suction forces. ACF takes this to a whole new level. ACF film is the best choice for printign high performance enginering resins such as the Onyx series, Henkel & BASF industrial series, etc. It is a sginifcatly bettter non-stick surface so it reduces peel forces greatly. So parts are less likely to stick to film or pop off from the build plate. This FEP Film is suitable for slightly bigger printers like Phrozen Mighty 8K, Mini 8k, Phrozen Sonic XL, Epax E10, Anycubic Mono, Elegoo Saturn etc Can also work with smaller DLP LCD 3D Printers, simply cut the sheet in half & you have 2 FEPs! This will work with Metal or Plastic vats. Very easy to use. Simply open the screws on your vat, remove the old FEP sheet, & put this sheet in place. Please see the video below to see how easily you can change the FEP on your Phrozen Sonic Mini Resin 3D Printers. You should change your FEP film when its cloudy, has excessive scratches, or you find the prints stick to it too easily rather than the bed. Depending on several factors, this is usually around 200 hrs of use. FEP is like a car tyre, you can have the best mechanics but without a good tyre, you're asking for trouble. We keep our prices on consumables cheap to help kiwis get the best results with 3d printers without prolonging the need to replace important components. Also check out the PlateBond Adhesion Promotor to help your base layers stick better to the bed of your resin 3d printer.
-
Power Interruption Circuit board for Creatbot desktop series D & F series 3d printers including DM , DX / DX Plus & DE / DE Plus 3D, F160 / F160 PEEK & F430 PEEK 3D Printer Printers. For D600 PRO series, PEEK 300 & F1000 series, please contact us for the appropriate part. This circuit board detects if there is a power failure while your Creatbot 3d printer is printing. Then when power resumes & the printer is started, the option to resume to resume the existing print is offered. This circuit is not critical, & the printer can still continue to be used with the board's white wire unplugged. Locations where there are excessive power outages seem to cause this board to blow out more frequently than other places. This is mainly because of spikes & voltage fluctuations in such locations. If you experience the need to frequently replace these, we recommend connecting your printer through a spike protector.
-
This is the genuine full metal angled build platform for Phrozen Sonic Mini & Mini 4K 3D printers. It is a thick solid bed to allow maximum print speeds without distortion. If you print a lot, particularly if you print larger layers at once, then this full metal build plate is the best choice.
-
This is a Carbon Fibre reinforced spring steel sheet designed for the Creatbot F160 & F160 PEEK 3d printer Bed. It allows you to setup an easy removable build plate system by 3d printing on this plate, or attaching your chosen build surface onto this plate. Check out our matching Creatbot F160 Build Tak Bed Mat for a sleek & easy solution. This is a high wear resistant 3d printing surface that can provide good adhesion for PEEK & PEI or other advanced polymers, with appropriate surface glues. Ideal for those who 3d print with such materials extensively. You can print directly on Carbon Fibre plates with any material including PLA, but you must apply a little bit of Glue stick on this plate first. You can also buy our 200x200mm PEI sheet which are perfect to stick on this metal plate.
-
Sale!This upgrade allows you to use the flexible build plate that sticks magnetically to the 3D Printer bed. It contains 2 parts - the magnetic sticker that goes on the bed, & a textured PEI coated steel removable magnetic plate. It is a PEI re-inforced build surface that provides excellent adhesion to most common materials. However, for Nylon based materials, we still recommend you put a thin layer of the glue stick on it. This kit fits Creator Pro, Dreamer, Inventor, Creator Pro, and Creator Pro 2 3D Printer. It also fits any 3d printer bed that is approx 152x232mm.
-
This is the genuine tapered full metal angled build platform for Phrozen Sonic Mini & Mini 4K 3D printers. It is a fully angled bed to allow the resin to flow down smoothly. Using this build platform will minimize resin accumulation on the top of the plate, allowing it to more readily drip back into the vat during printing. This makes clean-up and print removal faster, easier, and less messy overall so that you can spend more time printing. If you print a lot, or print very fast, or print larger parts, this all-metal build plate is the perfect choice.
-
Sale!This 3D Printing Pen is a versatile tool designed for 3D printing enthusiasts. Compatible with both PLA and ABS filaments, it allows for the creation of detailed artworks and functional prototypes with precision. It is also used to join prints, highlight them with colours, or repair any blemishes. Featuring advanced heating technology, this pen ensures smooth filament flow and strong adhesion, making it ideal for a wide range of creative projects. Whether you're sketching intricate designs or building complex structures, it offers a seamless and immersive experience, perfect for anyone passionate about bringing ideas to life in three dimensions.
-
Why buy this kit?
- Everything you need is with you from the start
- Diverse Scraper Choices
- Resin Recycling Made Easy
- Effortless Support Removal
- Keeping You Safe and Clean
- Plastic scraper x1
- Metal scraper x1
- Silicone scraper x1
- Clippers x1
- Sandpaper x1
- Wire mesh x1
- Collapsable funnel x1
- Brush x1
- Gloves x1
- Silicone mat x1
- Cleaning cloth x1
-
This is the upgraded high speed nozzle for the FlashForge Adventurer 5M & 5M Pro 3d printers. It can print faster & hotter upto 280C on compatible Adventurer 5 series 3d printers. It is not for older Adventurer 3 or 4 models. This is also an easy switch nozzle, they look & work exactly like the previous 240C nozzle with the added advantage of printing at higher temperature & faster speeds. This unique system allows you to quickly switch the nozzle, & heater block without any assembly. Just press the clamps on the sides of the head to push this assembly out, & then insert a new one in.
-
NFEP Film 450*280mm for large size Resin 3D Printers PFA (NFEP) is the better version of standard FEP film. This FEP Film is suitable for slightly bigger printers like Phrozen Mega8k, Transform, etc Can also work with smaller DLP LCD 3D Printers, simply cut the sheet in half & you have more FEPs! This will work with Metal or Plastic vats. Very easy to use. Simply open the screws on your vat, remove the old FEP sheet, & put this sheet in place. Please see the video below to see how easily you can change the FEP on your Phrozen Sonic Mini Resin 3D Printers. You should change your FEP film when its cloudy, has excessive scratches, or you find the prints stick to it too easily rather than the bed. Depending on several factors, this is usually around 200 hrs of use. FEP is like a car tyre, you can have the best mechanics but without a good tyre, you're asking for trouble. We keep our prices on consumables cheap to help kiwis get the best results with 3d printers without prolonging the need to replace important components. Also check out the PlateBond Adhesion Promotor to help your base layers stick better to the bed of your resin 3d printer.
-
This is the small PCB that goes behind the extruders of a Creatbot F430 head. The main ribbon cable connects to it from the motherboard underneath the machine. And other connectors such as the temp sensors, cartridge heaters, probe etc plug into this little board.
-
This is the long cable that connects the extruder board to the main board. Used by the Creatbot F430 3d printer. There are 2 versions of this cable. The older machines use a flat Ribbon cable. The newer machines use a Round cable. Please specify which one you would like in the shipping notes when you place the order.
-
This is the Touch Sensor used on many 3d printers like our Creatbot F430 & new D600 for the Z axi homing & auto level. If the probe tip bends or breaks, you can easily replace the probe. After many months of High Temperature printing, it is common for the probe's internal magnetism to get demagnetised due to the heat in the chamber. This can cause it to stop clicking on & off. Please replace the probe as needed.
-
Genuine Creatbot standard 260 degree rated hot end for F series 1.75mm 3d printers. Will suit all Creatbot F 3D Printers we sell including Creatbot F160, F160 PEEK, F430 & F430 PEEK edition 3d printers. This hot end is only for materials upto 260C. To print hotter, please use buy the High Temp Extruder hot end. The advantage of the standard hot end is that it has a teflon liner inside which aids smooth flow of materials like PLA. However this teflon can be worn off by abrasive materials like Carbon Fiber, so for such materials we recommend printing with the high temp hot end which doesnt have that liner. If you also need a new temperature sensor thermister or thermocouple, or a new cartridge heater, please buy them separately.
-
Genuine Creatbot high temp 420 degree rated hot end for F series 1.75mm 3d printers. Will suit all Creatbot F 3D Printers we sell including Creatbot F160, F160 PEEK, F430 & F430 PEEK edition 3d printers. This hot end will work for all materials upto 420C. This hot end doesnt have a teflon liner so it can be used with abrasive materials like carbon fibre. It will also work for PLA & other common materials. However, for beginners, we sometimes recommend printing those sorts of entry level materials with the standard temp hot end which has a teflon liner, which aids the smoother flow of PLA. So its a little more forgiving for times when your settings may not be quite perfect. However this teflon can be worn off by abrasive materials like Carbon Fiber, so for such materials we recommend printing with the high temp hot end which doesnt have that liner. If you also need a new temperature sensor thermister or thermocouple, or a new cartridge heater, please buy them separately.
-
Magigoo HT adhesive is designed to provide bed adhesion with challenging materials like PEI Ultem, PEEK, PEKK, PPS, PSU, PPSU etc. It can be used with all kinds of bed surfaces, however we recommend PEI or Garolite. It can also be used with Carbon Fiber reinforced filaments & Glass Filled materials, like PPS-CF, PEI-CF & PEEK-CF etc. To 3D Print Nylon, we recommend Magigoo PA as a first choice, & if that doesn't suit well for your particular filament, then try this Magigoo HT. For common materials like PLA, ABS etc, we recommend buying the Magigoo original glue. Magigoo glue reduces warping in FDM 3D printers. Warping is caused by the differential cooling of a print during a 3D printing process made up of layers. For printing advanced materials reliably, apply a thin layer of Magigoo on your print bed before printing. This will ensure a successful print. If too much glue has been lacquered on, please wipe with a damp sponge & then reapply glue.
-
This motor is used in the Creatbot F430 3d printer. It is the X axi motor that connects on the linear rail to move the head left to right. This is the motor only, not the fan/heatsink. Please remember to put the heatsink & fan from your old motor onto the new motor.
-
This is the USB reader board used on a Creatbot F430 & F160 3d printer. This is the Latest version board with an adapter to allow certain older printer models to also be able to use it.
-
Latest ACF Film for 15" LCD Resin 3D Printers The new Phrozen ACF film is designed with a non-stick and smoother film surface for more efficient 3D printing. Compared to FEP and PFA (nFEP) film, the ACF film features a better release, reducing the printing time and increasing the success rate. ACF is the strongest, & has the highest tear tolerance. It also has the lowerst peel force so suction forces are minised & you have the best print possible. NFEP film (also called PFA Film) is better than the old FEP film to reduce suction forces. ACF takes this to a whole new level. ACF film is the best choice for printign high performance enginering resins such as the Onyx series, Henkel & BASF industrial series, etc. It is a sginifcatly bettter non-stick surface so it reduces peel forces greatly. So parts are less likely to stick to film or pop off from the build plate. This FEP Film is suitable for the biggest of printers like Phrozen Mega 8K 15", Transform 13", etc Can also work with smaller DLP LCD 3D Printers, simply cut the sheet in half & you have multiple ACFs! This will work with Metal or Plastic vats. Very easy to use. Simply open the screws on your vat, remove the old FEP sheet, & put this sheet in place. Please see the video below to see how easily you can change the FEP on your Phrozen Sonic Mini Resin 3D Printers. You should change your FEP film when its cloudy, has excessive scratches, or you find the prints stick to it too easily rather than the bed. Depending on several factors, this is usually around 200 hrs of use. FEP is like a car tyre, you can have the best mechanics but without a good tyre, you're asking for trouble. We keep our prices on consumables cheap to help kiwis get the best results with 3d printers without prolonging the need to replace important components. Also check out the PlateBond Adhesion Promotor to help your base layers stick better to the bed of your resin 3d printer when using challenging materials at faster speeds.
-
This is a set of 6x genuine FlashForge brand Hardened steel nozzles containing 2x of each size 0.4, 0.6 & 0.8mm nozzles. Suitable to 3d print Carbon Fiber filaments as well as higher temperature materials. These hard nozzles are suitable for FlashForge Creator 3 PRO & Creator 4 series 3d printers. They will not fit the older Creator 3.
-
Genuine E10 resin tray molded using non corrosive plastic. This vat fits all EPAX E10 series 3D printers. Works with the original 8.9" screen E10 as well the new 10.1" E10 5K 3d printers. Each vat comes with a sheet of nFEP film already installed, ready to use. Just remove the old tray out & slide the new one in. Thats it, easy installation.
- Molded tank allows for cheap replacements and extras for switching out resin on the fly
- Fibreglass reinforced plastic sports increased durability and resistance to corrosion and resin.
- It is equipped with a rubber seal to ensure that the vat is water-tight to help avoid resin leaks.
- E10 Vat Max Volume 1500mL without build platform and 700mL with build platform
-
This is the full hot end which gives you new extrusion components under the motor. It includes the heat brake, throat tube, hot block, & a 0.4mm nozzle. It comes fitted with a new cartridge heater & a thermocouple temp sensor as well.
-
Latest ACF Film for 10" LCD Resin 3D Printers - Pack of 3 films The new Phrozen ACF film is designed with a non-stick and smoother film surface for more efficient 3D printing. Compared to FEP and PFA (nFEP) film, the ACF film features a better release, reducing the printing time and increasing the success rate. ACF is the strongest, & has the highest tear tolerance. It also has the lowest peel force so suction forces are minimised & you have the best print possible. NFEP film (also called PFA Film) is better than the old FEP film to reduce suction forces. ACF takes this to a whole new level. ACF film is the best choice for printing high performance engineering resins such as the Onyx series, Henkel & BASF industrial series, etc. It is a signifcatly better non-stick surface so it reduces peel forces greatly. So parts are less likely to stick to film or pop off from the build plate. This FEP Film is suitable for slightly bigger printers like Phrozen Mighty 8K, Mini 8k, Phrozen Sonic XL, Epax E10, Anycubic Mono, Elegoo Saturn etc Can also work with smaller DLP LCD 3D Printers, simply cut the sheet in half & you have 2 FEPs! This will work with Metal or Plastic vats. Very easy to use. Simply open the screws on your vat, remove the old FEP sheet, & put this sheet in place. Please see the video below to see how easily you can change the FEP on your Phrozen Sonic Mini Resin 3D Printers. You should change your FEP film when its cloudy, has excessive scratches, or you find the prints stick to it too easily rather than the bed. Depending on several factors, this is usually around 200 hrs of use. FEP is like a car tire, you can have the best mechanics but without a good tyre, you're asking for trouble. We keep our prices on consumables cheap to help kiwis get the best results with 3d printers without prolonging the need to replace important components. Also check out the PlateBond Adhesion Promotor to help your base layers stick better to the bed of your resin 3d printer.
-
This is an upgraded, full metal build platform for EPAX E10 3D printers. It is compatible with all version of the E10 printer including the new E10 5K. The unique top bracket has been specially designed to fit E10 printers for optimum performance. It is a fully angled bed to allow the resin to flow down smoothly. Using this build platform will minimize resin accumulation on the top of the plate, allowing it to more readily drip back into the vat during printing. This makes clean-up and print removal faster, easier, and less messy overall so that you can spend more time printing. If you print a lot, or print very fast, or print larger parts, this all-metal build plate is the perfect choice.
-
Carbon Fibre reinforced Steel board Actual board size is 490mm x 305mm Designed to fit our Creatbot F430 PEEK 3d printer but can be used in any machine of similar size. The advantage is that this surface offers very high abrassion resistance. So when you 3d print with high temp materials, the surface can last longer. The other advantage of these boards is that they can be used as removable build plates. We recommend sticking a PEI sheet on this if you want to use them in that way, as PEI is a more versatile surface & not just one for 3d printing PEEK. Please see our 400x300mm PEI sheets here.
-
Phrozen Pump & Fill Automatically adds resin mid-prints when the sensor detects your vat is running low on resin. It also sucks the leftover resin back into the bottle once you finish printing, making it easier to clean the vat without spilling resin. Compatible with Sonic Mega 8K S, & Sonic Mighty 14K Revo 3D Printers.
-
Genuine 10" 8K Mono LCD Screen for Phrozen Mighty 8K Resin 3d printer. This is a high quality durable screen designed to give you the best long lasting performance you can expect. If your LCD screen gets damaged, or you see the exposure affected, it might be time to change your LCD. This is the masking LCD screen which projects the UV light layers for your 3d print. It is not the small touch screen panel used to control the printer.
-
Full Swappable Extruder Head for the new FlashForge Creator 4 3D Printer. 3 Extruder options available: HS Extruder = High Temp 360C Extruder including Carbon Fiber filled materials. HT Extruder = upto 320C temp for common plastics including PLA/ABS. F Extruder = Specialist flexible filament extruder for high flex TPU TPE & similar materials. Please specify which head you want on the order notes.
-
Why Ultrasonic cleaners when Wash & Cure units seem to be so easy to use? Ultrasonic vibrations loosen out debris from any surface surface efficiently & quickly using harmless forces. The frequency of motion they form safely dislodges uncured resin particles at a microscopic level that other devices cant create. Ultrasonic cleaners can clean most resin parts in 3 mins. Most entry level washers can't beat that. The fact that there is no heavy movement, allows debris to settle rather than float around. This makes it far easier to get the parts clean with less fluid use. Resin cleaning liquids like Monocure Resin away & Phrozen now make it a cheaper & safer option than to use IPA or other explosive alcohol based cleaners. When cleaning castable resins or industrial resins in particular, ultrasonic cleaners will give you the edge.
-
Phrozen Sonic Saber makes removing supports hassle-free with the power of ultrasonic cutting. With 40,000 blade vibrations per second, this ultrasonic knife helps you trim and finish 3D prints at high-precision margins with ease.
-
Take away the mess & hassle of cleaning resin 3d prints by hand. The Phrozen Wash & Cure Kit will make your cleaning and curing process faster and easier. Thanks to its large washer and mathcing curing station, it can dry and cure your models all in one go.
- Clean Delicately With Powerful Vortex - Equipped with a powerful bottom propeller, the washing station effectively cleans your models without causing damage to details.
- Dunk 10” Wide Building Plate Straight In - With extra-large build volume, you can clean almost any model, no matter how big! Best used with Sonic Mighty 8K and other 10” building plates.
- The Dual Fan System Makes Drying Easier Than Ever - Designed with a fan drying mode, you can pop printed models straight into the curing station to dry and cure them in one go.
- No More Sticky and Unevenly Cured Models - With 405nm UV lights radiating from the back and under the models, the curing station ensures extra effective curing.
- Time-Saving - Coming as a pair, the 8L washing station and the curing station with the dry & cure function are literal time savers.
