3D Printer Shop

NZ’s Biggest range of everything 3D Printing

We’ve got new items coming in, & specials running on selected products frequently.

Check out all the new Resins we stock – Monocure Australia, Phrozen high speed 3d printing resins all at superb Prices too!
The worlds strongest Nylon HT Filaments now available. There’s also advanced PEI materials on offer.
To explore everything we have on special, please click here or on SALE link in the menu.

t&cs apply.

  • Gift Card Vouchers

    Gift Card Vouchers (1)

  • Vacuum Former

    Vacuum Former (2)

  • Uncategorized

    Uncategorized (1)

  • 3D Print Service

    3D Print Service (4)

  • 3d printer repair service NZ

    3d printer repair service NZ (2)

  • Brands

    Brands (167)

  • 3D Printing Resin

    3D Printing Resin (30)

  • 3D Printers

    3D Printers (38)

  • 3D Printer Parts & Accessories

    3D Printer Parts & Accessories (69)

  • 3D Printing Bundles (6)

  • 3D Printing Filament

    3D Printing Filament (82)

  • 3D Scanners

    3D Scanners (2)

  • 3d printer external filament roller
    View Cart
    Add to cart / Details

    3D Filament Spool Holder External Roller

    $15.00 +gst
    These simple external filament rollers can be used to put filament rolls of any size outside your printer & feed into the 3d printer. Great to load 3kg spools of filament into smaller printers. This works easily with rolls of any size including 1kg, 3kg, 5kg etc. The bearings allow rolls to turn freely, regardless of weight. The 2 pieces can be placed as far or as near as possible, based on the width of the rolls. Particularly useful for small light weight 3d printers which would otherwise topple when a heavy roll was mounted on them.  
  • 3D Printer Training NZ
    View Cart
    Add to cart / Details

    3D Printing Training 1 on 1 up to 2 hrs

    $150.00 +gst
    Our 3D Printer training can be catered to a wide range of 3d printers. In our intro course, we cover the basics needed to start 3d printing with popular software & machines. If you would like to buy a specific 3d printer, we can setup training for that model. We offer free 3d training with many of our professional products. Please click here to see our 3d printing course page for full details on our 3d printer training.  
  • Sale!
    Carbon Fibre PETg filament 3D Printer Store NZ
    View Cart
    Add to cart / Details

    3D4Makers ABS Carbon Filament 1.75mm (1kg)

    Original price was: $94.00.Current price is: $79.00. +gst
    Introducing Carbon ABS filament, a versatile 3D printing material designed to elevate your projects to new heights. This product boasts an impressive set of properties that make it a top choice for various applications. With its lightweight composition, Carbon ABS offers excellent impact resistance while maintaining ease of handling. Furthermore, its superior UV stability trumps traditional ABS, ensuring your creations maintain their vibrant appearance over time. One of the standout characteristics of Carbon ABS is its low moisture absorption rate, making it an ideal choice for projects where exposure to humidity may be a concern. Additionally, its exceptional strength-to-weight ratio surpasses that of nylon, providing you with a filament that can withstand demanding conditions without compromising on quality. One of the most noteworthy features of our Carbon ABS filament is its inclusion of carbon fibers, which effectively prevent warping issues commonly associated with ABS prints. As a result, you can now achieve precise and accurate prints without any significant deformations. The versatility of Carbon ABS goes beyond its mechanical properties. It finds particular suitability in automotive applications, thanks to its ability to withstand rugged conditions. Whether you're creating customized car parts or accessories, Carbon ABS ensures durability and reliability. Moreover, its lightweight composition makes it an excellent choice for drone enthusiasts seeking to improve the performance of their aerial companions. This package of Carbon ABS filament weighs 500g, providing you with ample material to bring your innovative ideas to life. Upgrade your 3D printing experience today with our exceptional Carbon ABS filament.
  • View Cart
    Add to cart / Details

    3D4makers Natural white C8 Filament 1.75mm (750 g)

    $64.00 +gst

    3D4Makers C8 3D Printing Filament 1.75mm 750g

    Facilan™ C8 is a type of filament specifically designed for 3D printing. It is known for its excellent printability and high strength properties compared to traditional PLA (Polylactic Acid) filament. One notable advantage of Facilan™ C8 is its ability to print without visible layers. This means that the printed object will have a smooth and seamless appearance, devoid of any visible lines or layers that are typically seen with other filament types. This makes Facilan™ C8 ideal for printing objects that require a high level of aesthetic finish. In addition to its superior surface finish, Facilan™ C8 also possesses enhanced strength properties compared to PLA. The filament has good dimensional stability, which means that the printed objects are less prone to warping or shrinking during the printing process. This allows for greater structural integrity and accuracy in the printed parts.
  • View Cart
    Add to cart / Details

    3D4makers Natural white Ortho Filament 1.75mm (750 g)

    $150.00 +gst

    3D4Makers Ortho 3D Printing Filament 1.75mm 750g

    Facilan™ Ortho Filament is a groundbreaking 3D printing material specifically designed for orthopedic applications. It is a durable and flexible filament that offers exceptional mechanical properties, making it ideal for creating customized splints, braces, and other orthopedic devices. Made from a unique blend of biocompatible polymers, this filament ensures patient comfort and excellent skin contact. Facilan™ Ortho Filament provides healthcare professionals with the ability to tailor orthopedic devices to individual patient needs, facilitating faster healing and recovery. With its high printability and compatibility with most desktop 3D printers, this innovative material is revolutionizing the orthopedic industry. Facilan™ Ortho is a versatile and high-quality polyester, known for its clean white appearance. It exhibits exceptional mechanical properties and has a density of about 1.2kg/cm3. With a melting point around 60°C, it is a safe and easy-to-print thermoplastic. The flexibility and toughness of Facilan™ Ortho, attributed to its glass transition temperature of -60°C, make it highly durable. Moreover, it is a biodegradable plastic, meeting compostability standards according to EN13432. One of its unique features is its excellent adhesion to textiles, allowing easy combination and bonding with textile inserts or other shoe components. Additionally, the low melting point of Facilan™ Ortho enables it to be easily reshaped with warm water after 3D printing.
  • filament, pla, dental, 3d printing, 1.75mm
    View Cart
    Add to cart / Details

    3D4makers Natural white PCL 100 Filament 1.75mm (750 g)

    $200.00 +gst

    3D4Makers PCL 100 3D Printing Filament 1.75mm 750g

    Facilan™ PCL 100 is a highly functional filament made from polycaprolactone, perfect for advanced applications such as medical research. This material is widely used in the development of artificial tracheas, smart materials, tissue engineering scaffolds, bioabsorbable implants, and more. Renowned universities and research centers worldwide trust Facilan™ PCL 100 for cutting-edge bioprinting and personalized medical research. With its flexibility and toughness, this filament has a glass transition temperature of -60 °C and a print temperature of around 120 °C. Its semi-crystalline aliphatic biodegradable polyester composition gives it a distinctive white appearance. Complying with European regulations, the filament produced by 3D4Makers is safe for use with food contact. Additionally, it offers excellent adhesion between layers, enhancing impact resistance, strength, durability, and print quality. Notably, Facilan™ PCL 100 can be reshaped in water at 55 °C after 3D printing due to its low melting point.
  • eSun Black 3d printer 1.75mm Filament New Zealand
    View Cart
    Add to cart / Details

    ABS 3D Printer Filament – Esun 1.75mm 1Kg Black

    $28.99 +gst
  • Placeholder
    View Cart
    Details

    Aluminium Metal 3D Printing Filament 1.75mm 1Kg

    Esun Aluminium 3d printer Filament - First in NZ Our Metal filled filaments are high density 3d printer filaments with around 20% pure metal powder in it. Please be careful of very cheap 'metal' filaments that usually have only 2% inside cheap PLA material. Aluminium is the closest you can come to real silver looking 3d prints by polishing it. In its raw state it looks like limestone which is excellent for architecture. You can also do a rough sand to give it the look of concrete or stone walls. Our metal filaments can be 3d printed & then sanded to make the metal inside sparkle! Steel is no exception & will certainly shine if you polish it. These filaments are also being used in experimental applications to explore uses such as sintering, baking & smelting to make production metal parts out of them with freedom of design at extremely cheap prices. Any 3d printer can 3d print metal filled materials but we recommend 0.6mm or larger nozzles with 02.mm (200 micron) or fatter layer height. Print slowly & at slightly higher temperatures than usual. Please read our FAQ Articles for more details on printing with filled materials.
  • eSun Black 3d printer 1.75mm Filament New Zealand
    View Cart
    Add to cart / Details

    ASA 3D Printer Filament – UV Stable – 1.75mm 1Kg BLACK

    $55.00 +gst
    ASA UV Stable 3D Printing Filament is a cousin of the famous ABS. ASA is similar to ABS in almost all aspects with the addition of UV stability. So it can be 3D Printed like ABS in most 3D Printers. BLACK colour ASA 3D Printer Filament 1 Kg roll Please remember that UV stability does not mean 100% UV 'Proof' All plastics - even PolyCarbonate will eventually crumble under our harsh New Zealand sun or other high levels of UV. But ASA is the cheapest material to offer UV immunity. It is also easier to work with than more advanced materials.
  • eSun Bronze 3D Printer Filament NZ
    View Cart
    Details

    Bronze Metal Filament 1.75mm 0.5Kg

    Bronze Filament - High Density - Now in NZ Our Metal filled filaments are high density 3d printer filaments with around 20% pure metal powder in it. Please be careful of very cheap 'metal' filaments that usually have only 2% bronze inside cheap PLA material! Bronze is possible the best looking metal filament out there - statues, art pieces, decals, jewellery - bring it on. Our metal filaments can be 3d printed & then sanded to make the metal inside sparkle! 0.5Kg roll 1.75mm Any 3d printer can 3d print metal filled materials but we recommend 0.6mm or larger nozzles with 02.mm (200 micron) or fatter layer height. Print slowly & at slightly higher temperatures than usual. Please read our FAQ Articles for more details on printing with filled materials.
  • 3D Printer NZ
    View Cart
    Add to cart / Details

    Buy 3D Print Service NZ

    $10.00 +gst
    Dear 3D print service customers, After you receive the confirmed 3D Print cost from us, please use this to place an order equal to the cost we agreed on. For eg, if the cost is $50, please select quantity of 5, so the total will be $50. We realise this is not an ideal system & are working to make it better. Thank you for your co-operation until then.
  • Jewellery Castable 3D Printing Resin New Zealand
    View Cart
    Add to cart / Details

    Castable Wax like 3D Printing Resin for Jewellery

    $190.00 +gst

    Phrozen Violet Castable Jewelry 3D Printing Resin

    We're happy to introduce the new Wax like Jewelry casting resin by Phrozen. Phrozen is revolutionising SLA 3D Printing resins by offering cutting edge formulations that provide better results than ever before at an amazing price point. Specially designed for jewellery casting, Phrozen’s Wax-like Castable Resins burn cleanly to provide reliable casting for all types of models, especially jewelry and any high precision dental parts. This is a violet resin, & is superior to most of the cheaper green dental casting resins you will find. These Violet resins can be used in dentristry as well, they are will offer finer details to most green products. Very similar casting properties to the Wax resin models used by Jewellers, & works with common burnout cycles. Please see the Burnout schedule image supplied by Phrozen that you can send to your casting company, or follow for casting yourself. We recommend cleaning these wax print parts with our special resin cleaning liquid inside an ultrasonic cleaner, after which you should cure them in a heated curer like our FlashForge FC1 cure box. This will provide low-shrinkage, high-precision models that will cast ash free with far less surface aberration. It will also have low water absorption during the printing process, giving you more consistent results than other castable resins on the market. Designed to be sent to your foundry for casting into any metal including gold, silver, platinum etc We recommend DLP technology to work with wax based resins, though common LCD printers will work fine as well. These resins are compatible with most mSLA LCD DLP style 3D Printers including our FlashFroge Hunter DLP, Phrozen Mega 8k, Sonic XL, & Transform 3D Printers. Can also be used with other 3d printer brands that use the 360-420nm UV spectrum resins like Anycubic Photon, Elegoo Mars, Epax, Wanhao, Creality LDR etc. 500ml can of violet resin 3D Printer Store has the largest range of 3D printing filaments & resins in stock right here in Auckland with economical shipping New Zealand wide.
  • Laser Mark PLA 3D Printing Filament NZ
    View Cart
    Add to cart / Details

    ColorFabb Laser Engraver Marking PLA filament 750g 1.75mm

    $90.00 +gst
    3D Print your part with this PLA & then Etch / Engrave with your Laser Engraver This unique material is optimized to be used with laser engravers within a 980-1064 nm wavelength. The material has been tested successfully with a Nd:YAG- and  fiberlasers. Laser marking has various advantageous over conventional marking technologies: Bright White Colour - Markings are permanent, waterproof, wear and heat resistant, lightfast and resistant to chemicals. - Flexibility in marking design. - No pre or post-treatment required. Laser marking PLA will not work with CO2 lasers. Please welcome ColorFabb's unique Laser marking Filament all the way from Netherlands & ready to ship right from Auckland.
  • LW PLA 3D Printer Filament NZ
    View Cart
    Add to cart / Details

    ColorFabb Light Weight LW-PLA Black 2.85mm 750g

    $85.00 +gst

    ColorFabb LW PLA Made in Netherlands - A First in New Zealand

    What is LWPLA? Its the First filament of its kind to use active foaming technology to achieve lightweight, low density PLA parts. At around 230C this material will start foaming, increasing its volume nearly 3 times. So if you're into 3d printing Model Aeroplanes, Drones, or making custom packaging inserts, this is the 3d printer filament you've been waiting for! You can now 3d print light weight aerofoils using nice strong shells rather than the old ways of using thin nozzles with single shells to keep the weight low - which in turn would make weak, delicate air frames that would need additional post processing to become usable. This material EXPANDS as its printed from out of the nozzle so you use a lot less of it, making this just as affordable 3d printing with PLA plus or similar! 2.85mm Black Colour roll 750 grams weight. Also check out the other unique Color Fabb 3D Printing Filaments we sell including the amazing Vario Shore TPU, another First in New Zealand. We're all about bringing cutting edge technology & the latest products to New Zealand at the best possible price for our kiwi 3d makers.
  • ColorFabb Natural 3D Printer Filament New Zealand
    View Cart
    Add to cart / Details

    ColorFabb Light Weight LW-PLA Natural 750gr 2.85mm

    $85.00 +gst

    ColorFabb LW PLA Made in Netherlands - A First in New Zealand

    What is LWPLA? Its the First filament of its kind to use active foaming technology to achieve lightweight, low density PLA parts. At around 230C this material will start foaming, increasing its volume nearly 3 times. So if you're into 3d printing Model Aeroplanes, Drones, or making custom packaging inserts, this is the 3d printer filament you've been waiting for! You can now 3d print light weight aerofoils using nice strong shells rather than the old ways of using thin nozzles with single shells to keep the weight low - which in turn would make weak, delicate air frames that would need additional post processing to become usable. This material EXPANDS as its printed from out of the nozzle so you use a lot less of it, making this just as affordable 3d printing with PLA plus or similar! 2.85mm Natural Colour roll 750 grams weight. Also check out the other unique Color Fabb 3D Printing Filaments we sell including the amazing Vario Shore TPU, another First in New Zealand. We're all about bringing cutting edge technology & the latest products to New Zealand at the best possible price for our kiwi 3d makers.
  • Placeholder
    View Cart
    Details

    Copper Metal 3D Filament 1.75mm 1Kg

    Copper Filament - High Density - Now in NZ Our Metal filled filaments are high density 3d printer filaments with around 20% pure metal powder in it. Please be careful of very cheap 'metal' filaments that usually have only 2% bronze inside cheap PLA material! Copper is a high density metal filament that even has some electrical conductivity! And you can use it for medals, trophies, commemorative emblems, or jewellery too. Our metal filaments can be 3d printed & then sanded to make the metal inside sparkle! Any 3d printer can 3d print metal filled materials but we recommend 0.6mm or larger nozzles with 02.mm (200 micron) or fatter layer height. Print slowly & at slightly higher temperatures than usual. Please read our FAQ Articles for more details on printing with filled materials.
  • Placeholder
    View Cart
    Add to cart / Details

    Creatbot 450x300mm Carbon Fiber Steel Bed Sheet

    $175.00 +gst
    Carbon Fibre reinforced Steel board Actual board size is 490mm x 305mm Designed to fit our Creatbot F430 PEEK 3d printer but can be used in any machine of similar size. The advantage is that this surface offers very high abrassion resistance. So when you 3d print with high temp materials, the surface can last longer. The other advantage of these boards is that they can be used as removable build plates. We recommend sticking a PEI sheet on this if you want to use them in that way, as PEI is a more versatile surface & not just one for 3d printing PEEK. Please see our 400x300mm PEI sheets here.
  • Placeholder
    View Cart
    Add to cart / Details

    Creatbot aluminum Door handles

    $10.00 +gst
    Genuine Creatbot door handles. These are the slim thin silver coloured aluminum door handles on newer Creatbot 3d printers with hinged doors. They are the smaller size (approx 80mm long), which are used for DX, DE, F160. They are also used on the rear chamber doors of the F430. These are attached to the Acrylic doors on the D series, & corresponding door frames on F series machines.
  • Z Touch Probe NZ
    View Cart
    Add to cart / Details

    Creatbot BL Touch Probe Z axi

    $79.00 +gst
    This is the Touch Sensor used on many 3d printers like our Creatbot F430 & new D600 for the Z axi homing & auto level. If the probe tip bends or breaks, you can easily replace the probe. After many months of High Temperature printing, it is common for the probe's internal magnetism to get demagnetised due to the heat in the chamber. This can cause it to stop clicking on & off. Please replace the probe as needed.
  • Placeholder
    View Cart
    Add to cart / Details

    Creatbot D Extruder Head Feed Tube with Plugs

    $40.00 +gst
    The Teflon feed tube to connect the extruder to the head on Creatbot D series 3d printers like the Creatbot DX, DE etc. Includes the brass studs that the tube plugs into & locks into place. Screws on the head end & the extruder end. No assembly needed. Available for 3mm filament as well as 1.75mm filament based Creatbot D series machines. Please specify filament diameter, otherwise the default 3mm compatible tubes will be sent as they are more common. If your lugs break off, please consider buying this 1 piece ready tube.
  • Cartridge Heater Long Wire for 3D Printer NZ
    View Cart
    Add to cart / Details

    Creatbot D Printers Head Cartridge Heater

    $20.00 +gst
    Standard Tube Cartridge Heater that slots inside the hot block. Has long wire leads. Suitable for all Creatbot D series 3d printers including DX , DX Plus, DE , DE Plus for all single, dual or triple head models.
  • Creatbot DX DE series 3D Printer nozzle
    View Cart
    Add to cart / Details

    Creatbot D series 3D Printer Nozzle

    $30.00 +gst
    Genuine Creatbot second generation nozzles. Will suit all Creatbot D series 3D Printers we sell: DM, DX, DE & Plus versions We stock a wide range of nozzle diameters: 0.4, 0.6, 0.8, 1.0 mm  
  • Placeholder
    View Cart
    Add to cart / Details

    Creatbot D series 3D Printer Thermocouple Temperature Sensor

    $25.00 +gst
    This is a temperature sensing Thermocouple for Creatbot D series 3d printers. They will fit all Creatbot DX & DE machines bought since 2015.  
  • Creatbot D series 3d printer Throat Tube Heat Brake part new zealand
    View Cart
    Add to cart / Details

    Creatbot D series 3D Printer Throat Tube Heat Brake

    $20.00 +gst
    Genuine Creatbot Throat Tube which connects onto the heat sink on top & the nozzle goes at the bottom. If you have replaced nozzles & still find there are extrusion issues, please consider changing this part. This tube is considered part of the heat break mechanisk, & has a partial teflon coating on the top to aim smooth extrusion. So it is recommend you change this tube as needed for the best uniformity in extrusion as well as reduction of jams or blockages particular in longer 3d prints. Will suit all Creatbot D series 3D Printers we sell including DM, DX, DE, the Plus versions, & the older D600 3mm machines  
  • Creatbot D1000 commercial 3d printer 1 metre
    View Cart
    Details

    Creatbot D1000 Commercial 3D Printer (1000x1000x1000mm) – $POA

    Big Parts - High Accuracy - Production Capability -  In All Common Filaments The Creatbot D1000 is our new top of the line Commercial grade FDM 3D printer, now updated with Servo Controlled Stepper motors & closed loop feedback electronics, giving it the most precise head positioning capability of any large scale 3D Printer on the market. Large 1000mm x 1000mm x 1000mm active heated build volume makes it possible to print large parts one piece with ease. Suited to producing large yet highly accurate 3d models, the D600 has every professional grade feature you would expect. Contact us today to see how our leading edge Creatbot D1000 could give your business & an edge in product development. Please see full specification details below. Free training is offered with our Creatbot F1000. We will spend several hours with you to discuss any product specific requirements & help you get the best possible outcomes from these machines. We also offer free implementation assistance at your site, so you can rely on a team right here in New Zealand. We are New Zealand's PREMIUM Creatbot 3D Printer Partner. We are the only one in NZ to offer FREE TRAINING with all these advanced Creatbot 3D Printers so that you fully supported after buying the 3D Printer & not left alone after the printer is delivered. There is no extra charge for this training service. This is the committment we have put into the New Zealand 3D Printing Market - We want you to succeed with 3D Printing, & in your success is our success. We aim to have the BEST PRICE & BEST SERVICE for Everything 3D Printing  in NZ. On top of our Free Training, we still Aim to be UNBEATEN on Price. Please contact us to get a quote. If you find the same product & a comparable service level anywhere in New Zealand, please let us know as we will usually be able to beat the competition.
  • Creatbot D600 Pro 2 3d printer New Zealand Australia
    View Cart
    Add to cart / Details

    Creatbot D600 PRO 2 3D Printer with Servo Motor System

    $23,900.00 +gst
    Big Parts, High Accuracy, & Reliability - In ALL Filament Materials currently available. The Creatbot D600 Pro 2 is the latest version of the successful D600 commercial grade FDM 3D printer. It features Servo Controlled motors & closed loop feedback electronics, giving it the most precise head calibration of any similar sized large scale 3D Printer on the market. It has become common to see low cost large size 3d printers on the market. So why would you buy this one? Just doubling the size of every single part & giving you a large bed, doesn't lead to a successful print. With cheaper printers you will see them advertise a size like 500x500mm, but when you actually try to print a part that size, your builds will consistently fail. Multi-day prints will be composed of layer shifts in the XY direction, even a 0.1mm XY shift will land your part in the rubbish bin. This is why real commercial grade 3d printers are designed to be able to produce what the spec sheet actually has on it. And that is the reliability you need, so that you dont come back to a 3 day print only to throw it in the bin. Large 600mm x 600mm x 600mm actively convection heated build volume makes it possible to print large parts one piece with ease. And the servo control system doesn't cause stepper drivers to overheat, which is all too common in kit style large 3d printers. Suited to producing large yet highly accurate 3d models, the D600 has every professional grade feature you would expect. Contact us today to see how our leading edge Creatbot D600 2 could give you the edge in product development & manufacturing. Please see full specification details below. Free training is offered with our Creatbot D600. We will spend several hours with you to discuss any product specific requirements & help you get the best possible outcomes from these 3d printers. We will also help you implement the 3d printer into your workflow, so you can rely on a team right here in Auckland. We also offer Free Phone based support, not just email. All spare parts are stocked right here in Auckland & sent same day in most cases with overnight courier. So should you need a spare part, your 3d printer isn't sitting there costing you money. Its surprising how many 3d printer companies advertise machines but don't stock parts for when you need them the most. We are New Zealand's EXCLUSIVE Creatbot Partner. We are also authorised Creatbot suppiers for Australia. We are the only company in the regions to offer FREE TRAINING with these 3D Printers so that you fully supported after buying the 3D Printer & not left alone to figure things out. There is no extra charge for this support service. This is the commitment we have put into the New Zealand & Australian 3D Printing Market - We want you to succeed with 3D Printing, & in your success is our success. We aim to have the BEST PRICE & BEST SERVICE for Everything 3D Printing  in NZ / AU. On top of our Free Training, we still Aim to be UNBEATEN on Price. So if you find the same product & a comparable service level anywhere world wide, please get in touch with us & we will usually be able to beat the competition.
  • Creatbot D600 Pro commercial 3d printer
    View Cart
    Add to cart / Details

    Creatbot D600 PRO Large Volume Commercial 3D Printer

    $22,000.00 +gst
    Big Parts, High Accuracy, & Reliability - In ALL Filament Materials currently available. The Creatbot D600 Pro is based on the successful D600 commercial grade FDM 3D printer. It features Servo Controlled motors & closed loop feedback electronics, giving it the most precise head calibration of any similar sized large scale 3D Printer on the market. It has become common to see low cost large size 3d printers on the market. So why would you buy this one? Just doubling the size of every single part & giving you a large bed, doesn't lead to a successful print. With cheaper printers you will see them advertise a size like 500x500mm, but when you actually try to print a part that size, your builds will consistently fail. Multi-day prints will be composed of layer shifts in the XY direction, even a 0.1mm XY shift will land your part in the rubbish bin. This is why real commercial grade 3d printers are designed to be able to produce what the spec sheet actually has on it. And that is the reliability you need, so that you dont come back to a 3 day print only to throw it in the bin. Large 600mm x 600mm x 600mm actively convection heated build volume makes it possible to print large parts one piece with ease. And the servo control system doesn't cause stepper drivers to overheat, which is all too common in kit style large 3d printers. Suited to producing large yet highly accurate 3d models, the D600 has every professional grade feature you would expect. Contact us today to see how our leading edge Creatbot D600 could give you the edge in product development & manufacturing. Please see full specification details below. Free training is offered with our Creatbot D600. We will spend several hours with you to discuss any product specific requirements & help you get the best possible outcomes from these 3d printers. We will also help you implement the 3d printer into your workflow, so you can rely on a team right here in Auckland. We also offer Free Phone based support, not just email. All spare parts are stocked right here in Auckland & sent same day in most cases with overnight courier. So should you need a spare part, your 3d printer isn't sitting there costing you money. Its surprising how many 3d printer companies advertise machines but don't stock parts for when you need them the most. We are New Zealand's EXCLUSIVE Creatbot Partner. We are also authorised Creatbot suppliers for Australia. We are the only company in the region to offer FREE TRAINING with these 3D Printers so that you fully supported after buying the 3D Printer & not left alone to figure things out. There is no extra charge for this support service. This is the commitment we have put into the New Zealand & Australian 3D Printing Market - We want you to succeed with 3D Printing, & in your success is our success. We aim to have the BEST PRICE & BEST SERVICE for Everything 3D Printing  in NZ / AU.
  • Creatbot DE plus 3d printer NZ
    View Cart
    Add to cart / Details

    CreatBot DE Plus 2 Extruder 3D Printer – FREE Training – NZ Support

    $6,000.00 +gst
  • Creatbot DE plus 3d printer NZ
    View Cart
    Add to cart / Details

    CreatBot DE Plus 3 Extruder 3D Printer – FREE Training – NZ Support

    $6,500.00 +gst
  • DX 3D Printer Door Hinge New Zealand
    View Cart
    Add to cart / Details

    Creatbot Door Hinge

    $5.00 +gst
    Hinges used for many Creatbot 3D Printers. Fits newer version of Creatbot DX, DE & also some versions of F160. Used with the clear plastic panels used on doors. 1 piece. Please buy as many as you need. Standard 40mm hinge that can work for many other applications.
  • Creatbot DX 3D Printer Dual Extruder NZ
    View Cart
    Add to cart / Details

    CreatBot DX 2 Dual Extruder 3D Printer – FREE Training

    $2,600.00 +gst
    With 2 high temp Extruders, Free Training, & Free Calibration, Creatbot DX 3D Printers are targeted to product development studios, manufacturing houses, and serious 3D Printing Professionals. These robust 3d printers are capable of delivering commercial quality results in industrial applications. You can choose 1.75mm heads or 3mm heads, or even 1 of each! Print 30cm x 30cm x 25cm parts 2 Heads (up to 3 available, please see DX03 model) Enhanced Stability with Everything Metal 40 - 800 micron layer height XY Precision of 0.05mm A highly reliable 3d printer that is at home in everything from a home office through to a factory floor - now at an unbeatable price.
  • Creatbot DX 3D Printer Triple Extruder NZ
    View Cart
    Add to cart / Details

    CreatBot DX 3 Triple Head 3D Printer in NZ – Free Training

    $2,800.00 +gst
  • Creatbot DX Plus 3D Printer NZ
    View Cart
    Add to cart / Details

    CreatBot DX PLUS Dual Extruder 3D Printer – FREE Training & Support

    $3,390.00 +gst

    Creatbot DX PLUS 3D Printer - 2 Heads - 1.75mm or 3mm available!

    Print Big, Print HIGH & Print Fast - the DX Plus lets you print upto 520mm Tall !! With 2 high temp 350 deg C Extruders, Free Training, & Free Calibration, Creatbot DX 3D Printers are targeted to product development studios, manufacturing houses, and serious 3D Printing Professionals. These robust 3d printers are capable of delivering commercial quality results in industrial applications. All our Creatbot DX 3D Printers in New Zealand feature the advanced 350 Degree C high temp extruder. Watch out for older models that have the 250 deg Extruder version which does not support materials that need to go hotter to print reliably thus reducing the material compatibility. Please see below for full details. 3D Printing Services are Authorised Resellers for Creatbot in New Zealand. Month end Terms Available - please Contact Us to arrange!
  • Placeholder
    View Cart
    Add to cart / Details

    Creatbot F Printers Head Cartridge Heater

    $20.00 +gst
    Suitable for all Creatbot F series 3d printers including F430, F160, & their PEEK edition 3d printers. Standard Tube Cartridge Heater that slots inside the hot block. Has a small connector to plug on the board.
  • Creatbot Hgh Temp Full metal hot end heat break nz
    View Cart
    Add to cart / Details

    Creatbot F series 1.75mm Full Metal Hotend Heat Brake Tube

    $20.00 +gst
    Genuine Creatbot Throat Tube which connects the hot block into the extruder mechanism. This is the Full Matal hot end which doesn't have a teflon liner inside, allowing you to easily print Carbon Fiber as well as high temp materials up to 450C. If you are new to 3d printing, you might find it useful to start with the other Teflon lined heat brake version as it can be easier to print common materials like PLA & ABS with that one. The heat sink & the nozzle is attached at the bottom of this piece. If you have replaced nozzles & still find there are extrusion issues, please consider changing this part. This tube is considered part of the heat break mechanisk, & has a partial teflon coating on the top to aim smooth extrusion. So it is recommend you change this tube as needed for the best uniformity in extrusion as well as reduction of jams or blockages particular in longer 3d prints. Will suit all Creatbot D series 3D Printers we sell including F160, F160 PEEK, F430, F430 PEEK, D600 PRO (not the older D600)
  • Creatbot teflon hot end heat break tube
    View Cart
    Add to cart / Details

    Creatbot F series 1.75mm Teflon lined Heat Brake Tube

    $20.00 +gst
    Genuine Creatbot Throat Tube which connects the hot block into the extruder mechanism. This is the teflon tube lined version which makes it easy to print PLA, PETg etc thanks to the teflon liner. But it will only operate up to 260C, please do not print hotter than that else you will damage the teflon liner. The heat sink & the nozzle is attached at the bottom of this piece. If you have replaced nozzles & still find there are extrusion issues, please consider changing this part. This tube is considered part of the heat break mechanisk, & has a partial teflon coating on the top to aim smooth extrusion. So it is recommend you change this tube as needed for the best uniformity in extrusion as well as reduction of jams or blockages particular in longer 3d prints. Will suit all Creatbot D series 3D Printers we sell including F160, F160 PEEK, F430, F430 PEEK, D600 PRO (not the older D600)
  • Placeholder
    View Cart
    Add to cart / Details

    Creatbot F series 3D Printer Thermocouple Temperature Sensor

    $25.00 +gst
    This is a temperature sensing Thermocouple for Creatbot F series 3d printers. They will fit all Creatbot F430 & F160 3d printers.
  • Creatbot F430 F160 3d printer part cooling fan
    View Cart
    Add to cart / Details

    Creatbot F series part cooling fan

    $25.00 +gst
    This is a 24V DC radial fan used as the part cooling fan on Creatbot F430 & F160 3d printers. It is mounted to the side of the extruder 1 (between 1 & 2 if its a dual extruder machine) & plugs into the top extruder board above the head.
  • Creatbot USB reader board with adapter
    View Cart
    Add to cart / Details

    Creatbot F USB reader board with adapter

    $80.00 +gst
    This is the USB reader board used on a Creatbot F430 & F160 3d printer. This is the Latest version board with an adapter to allow certain older printer models to also be able to use it.
  • Creatbot F160 3D Printer NZ
    View Cart
    Add to cart / Details

    Creatbot F160 3D Printer – standard version

    $2,300.00 +gst

    CreatBot F-160 3D Printer

    Industrial Build Quality & High Precision meets compact Desktop size & at an Affordable Price. A robust 3D Printer in a small footprint that can 3D print most materials with very high accuracy. Don't just take our word for it. Our F160 has been awarded  BEST OVERALL 3D Printer in New Zealand by the NZ Top Reviews List!! Please Note: This is the standard edition (not PEEK capable) F160 3D Printer. We also sell an advanced version of the same machine, but with even better capability that allows making small one off parts in Advanced materials like Aerospace Grade PEI or Medical Grade PEEK. Please see the F160 PEEK Edition here for more details. Creatbot F160 Build volume: 160mm x 160mm x 200mm
  • Creatbot F160 buildtak bed mat
    View Cart
    Add to cart / Details

    Creatbot F160 BuildTak Bed Mat

    $25.00 +gst
    Buildtak style Bed Mat designed for the Creatbot F160 & F160 PEEK 3d printer. This is a simple, easy to apply stick on mat that sticks on the bed of the 3d printer. It can even stick on an existing buildtak. Just peel the bottom & use like a sticker. Great adhesion for common materials like PLA, ABS, PETg, TPU. For a high wearing setup you can buy our matching Carbon Fibre Metal Plate to setup a removable bed system.
  • Placeholder
    View Cart
    Add to cart / Details

    Creatbot F160 Carbon Fibre Metal Sheet

    $59.00 +gst
    This is a Carbon Fibre reinforced spring steel sheet designed for the Creatbot F160 & F160 PEEK 3d printer Bed. It allows you to setup an easy removable build plate system by 3d printing on this plate, or attaching your chosen build surface onto this plate. Check out our matching Creatbot F160 Build Tak Bed Mat for a sleek & easy solution. This is a high wear resistant 3d printing surface that can provide good adhesion for PEEK & PEI or other advanced polymers, with appropriate surface glues. Ideal for those who 3d print with such materials extensively. You can print directly on Carbon Fibre plates with any material including PLA, but you must apply a little bit of Glue stick on this plate first. You can also buy our 200x200mm PEI sheet which are perfect to stick on this metal plate.  
  • Creatbot F160 3D Printer NZ
    View Cart
    Add to cart / Details

    Creatbot F160 PEEK Edition 3D Printer

    $2,600.00 +gst

    CreatBot F-160 PEEK Edition 3D Printer

    Industrial Quality, Affordable Price If you are looking for a robust 3D Printer in a Small Footprint that can 3D print ANY material including PEEK / PEI, look no further. Build volume: 160mm x 160mm x 200mm Please Note: This is the NEW PEEK edition Creatbot F160 3D Printer. The standard F160 can not print peek as it did doesn't have active chamber heating. The new F160 PEEK edition includes:
    • Very silent - quieter than most microwave ovens.
    • Fast Heating Extruder heats to 400 deg C
    • Fast heating Build plate heats to 120C
    • Active Chamber heater up to 70C
    • Automatic Resume on Power Failure
    • Auto Pause when Filament ends
    • Auto Shut off after 3d Print completed
    The F160 PEEK is the newer advanced version of our Award Winning F160 3D Printer that got Crowned BEST 3D PRINTER in New Zealand by TopReviewsNZ!
  • F430 professional 3d printing package with filaments & accessories
    View Cart
    Add to cart / Details

    Creatbot F430 3D Printer bundle save $400

    $6,400.00 +gst
    This package includes our #1 selling F430 advanced 3d printer with a selection of common filaments, advanced materials & recommended accessories. If you are looking to further your 3d printing using ultra performance materials, this bundle has everything you need to get started. You'll still get the Free Training & Delivery too. Buying this bundle will save you $400! Choose $800 worth of any items, you're getting them HALF PRICE. Here are some popular items we suggest you to consider from: PLA filament (super easy versatile filament, a must have) Petg filament (easy yet capable, handles 65C & is a dense non-brittle material) Carbon Fiber reinforced PETg filament (easy to print, good stiffness, handles 85C with low moisture uptake) ABS reinforced Carbon Fiber Filament (best light weight filament that offers impact resistance, 120C temp, & light weight parts) ESD safe ABS (excellent for electronic components that may be near magnetic fields) Nylon PA filament (great for bushes & places with lubrication or chemicals) Polycarbonate Filament (excellent heat resistance, impact resistance, & flexibility) PEKK ultra performance filament (as good as PEEK yet easier to print on F430) Martensitic & Stainless nozzles, heat brake tubes Hot end parts like temp sensors & heaters Garolite bed sheet & glues (a great build surface for the F430, & a good glue helps with printing Nylons) Choose any filaments & items worth $800. Here are some common filaments that make a good bundle: Want a package customised to your specific needs? No problem, we can make a package deal that suits your needs. Please contact us & we'll make a discounted package just for you.
  • CreatBot F series 3d printer Hot End 420C Hot End High Temp NZ Aus
    View Cart
    Add to cart / Details

    Creatbot F430 F160 3D Printer 420C High Temp Hot End

    $79.00 +gst
    Genuine Creatbot high temp 420 degree rated hot end for F series 1.75mm 3d printers. Will suit all Creatbot F 3D Printers we sell including Creatbot F160, F160 PEEK, F430 & F430 PEEK edition 3d printers. This hot end will work for all materials upto 420C. This hot end doesnt have a teflon liner so it can be used with abrasive materials like carbon fibre. It will also work for PLA & other common materials. However, for beginners, we sometimes recommend printing those sorts of entry level materials with the standard temp hot end which has a teflon liner, which aids the smoother flow of PLA. So its a little more forgiving for times when your settings may not be quite perfect. However this teflon can be worn off by abrasive materials like Carbon Fiber, so for such materials we recommend printing with the high temp hot end which doesnt have that liner. If you also need a new temperature sensor thermister or thermocouple, or a new cartridge heater, please buy them separately.
  • CreatBot F 3d printer Hot End Standard 260C NZ Aus
    View Cart
    Add to cart / Details

    Creatbot F430 F160 3D Printer Standard 260C Temp Hot End

    $79.00 +gst
    Genuine Creatbot standard 260 degree rated hot end for F series 1.75mm 3d printers. Will suit all Creatbot F 3D Printers we sell including Creatbot F160, F160 PEEK, F430 & F430 PEEK edition 3d printers. This hot end is only for materials upto 260C. To print hotter, please use buy the High Temp Extruder hot end. The advantage of the standard hot end is that it has a teflon liner inside which aids smooth flow of materials like PLA. However this teflon can be worn off by abrasive materials like Carbon Fiber, so for such materials we recommend printing with the high temp hot end which doesnt have that liner. If you also need a new temperature sensor thermister or thermocouple, or a new cartridge heater, please buy them separately.  
  • Creatbot f430 High Temp Advanced 3d Printer
    View Cart
    Add to cart / Details

    Creatbot F430 PEEK Edition Professional 3D Printer

    $5,999.00 +gst

    Creatbot F430 - NZ's Most Advanced Professional Desktop 3D Printer

    With the new & improved Creatbot F430, you can 3D Print any material currently available in Filament Form. An Advanced 3D Printer that has every feature a versatile desktop 3D Printer can be expected to have for superb performance.Get the F430 & you will never look back.

    Why buy from us?

    We have these machines ready to collect or ship from our Auckland office. Free Training with the Creatbot F430 3d printer. Free Phone Support, not just email support. Free Fully Calibrated Material Specific Profiles for over 40 different requirements. We also give you $200 worth of extras including high temp capable hot ends in the package. We aim to have the BEST PRICE & BEST SERVICE for Everything 3D Printing in NZ. On top of our Free Training & Support, we still Aim to be UNBEATEN on Price. So if you find the same product & a comparable service level anywhere in New Zealand, please get in touch with us & we will usually be able to beat the competition. Why buy a High Temperature capable 3d printer? Machines like the Creatbot F430 are not only for high performance materials. They are much better at printing everything else. So the features that make the F430 a stunning desktop 3d printer are actually going to help anyone make better 3d prints time & time again even with the simplest of materials like PLA. This machine can 3d print with any material currently available in filament form, including the entire range of Carbon Fibre reinforced Nylon 6/12, Carbon PetG, Carbon Fibre PEI, Carbon Fibre PEKK, PEEK, PEKK, PEI, PPSU, PSF, ESD PC etc They will also print all your common PLA, ABS, ASA, PETG, TPU, etc extremely accurately. Please see Details & Technical Specifications below
  • Placeholder
    View Cart
    Add to cart / Details

    Creatbot F430 X axi Stepper Motor

    $80.00 +gst
    This motor is used in the Creatbot F430 3d printer. It is the X axi motor that connects on the linear rail to move the head left to right. This is the motor only, not the fan/heatsink. Please remember to put the heatsink & fan from your old motor onto the new motor.
  • Sale!
    Creatbot PEEK 300 3D Printer Ultra Advanced specialist performance New Zealand
    View Cart
    Add to cart / Details

    Creatbot PEEK 300 Industrial Material 3D Printer

    Original price was: $21,000.00.Current price is: $19,999.00. +gst
    The CreatBot PEEK-300 is an ultra performance 3D printer specially optimised to work with ultra high performance advanced materials such as PEEK, PEKK, PEI (Ultem tm), etc polymers in a dedicated no-compromise environment. It is designed for high reliability and industrail performance at a price that is substantially cheaper than industrial additive manufacturing systems. 3D Print any advanced polymer filaments without any warping or shrinkage issues to deal with regardless of size. And thanks to the Patented DAS system, you won't need to anneal your prototpyes, saving you several hours & resources in post-print processing. An outline simple Industry specific use cases :
    • Engine manfolds can be 3d printed using PEI 1010, which handles 200 deg C operating temp.
    • FDA approved parts can be 3d printed using PEI 9085 to aid substantial weight reduction on aircraft, with a weight to strength ratio that is greater than aluminum, with all the necessary flame retardant properties.
    • Hip, Knee & Jaw replacements for interbody transplants can be 3d printed using PEEK instead of titanium to aid MRI friendly post operative assessment & any future surgical planning.
    • Medical tooling can be 3d printed using PPSF / PPSU & can survive commercial autoclave sterlisation exceeding 230 deg C & be exposed to bodily fluids as it is rated for use in biodiverse aqueus conditions.
    Ultra performance Polymers & Composites are the future in additive manufacturing of production parts on demand. Special Features found only on the Creatbot PEEK 300:
    • Patented Direct Annealing Hot end
    • Water cooled triple heat isolatation system
    • 500 deg C Dual Extruder Heads
    • 120 deg C Active Thermal Chamber
    • 200 deg C Heated Bed
    Build volume 300 x 300mm x 400mm height From the company that brought you the first affordable desktop grade PEEK capable 3D Printer, now comes a beast that is designed to deliver cutting edge factory parts on demand in Automotive, Aerospace, Medical, & R&D specifically using PEEK & its related family of plastic filaments.
  • Creatbot 3D printer power detection chip NZ
    View Cart
    Add to cart / Details

    Creatbot Power Failure Detection Board

    $49.00 +gst
    Power Interruption Circuit board for Creatbot desktop series D & F series 3d printers including DM , DX / DX Plus & DE / DE Plus 3D, F160 / F160 PEEK & F430 PEEK 3D Printer Printers. For D600 PRO series, PEEK 300 & F1000 series, please contact us for the appropriate part. This circuit board detects if there is a power failure while your Creatbot 3d printer is printing. Then when power resumes & the printer is started, the option to resume to resume the existing print is offered. This circuit is not critical, & the printer can still continue to be used with the board's white wire unplugged. Locations where there are excessive power outages seem to cause this board to blow out more frequently than other places. This is mainly because of spikes & voltage fluctuations in such locations. If you experience the need to frequently replace these, we recommend connecting your printer through a spike protector.
  • Creatbot 6032 high current stepper driver
    View Cart
    Select options / Details

    Creatbot XYZ Stepper Driver

    $19.00 +gst
    These are the drivers used to drive the stepper motors on Creatbot 3d printers. They are used for the X Y Z axi motors as well as for the Extruder motors. Different drivers have been used for the X Y axi as well as for the Z & E1 / E2. Please choose the correct model number. If the model you have is not listed, please contact us & we will set it up for you.
  • E10 metal angled build plate
    View Cart
    Add to cart / Details

    Epax E10 All Metal Angled Build Platform

    $149.00 +gst
    This is an upgraded, full metal build platform for EPAX E10 3D printers. It is compatible with all version of the E10 printer including the new E10 5K. The unique top bracket has been specially designed to fit E10 printers for optimum performance. It is a fully angled bed to allow the resin to flow down smoothly. Using this build platform will minimize resin accumulation on the top of the plate, allowing it to more readily drip back into the vat during printing. This makes clean-up and print removal faster, easier, and less messy overall so that you can spend more time printing. If you print a lot, or print very fast, or print larger parts, this all-metal build plate is the perfect choice.
  • Epax E10 Vat Resin Tray
    View Cart
    Add to cart / Details

    Epax E10 Vat Resin Tray with NFEP installed

    $99.00 +gst
    Genuine E10 resin tray molded using non corrosive plastic. This vat fits all EPAX E10 series 3D printers. Works with the original 8.9" screen E10 as well the new 10.1" E10 5K 3d printers. Each vat comes with a sheet of nFEP film already installed, ready to use. Just remove the old tray out & slide the new one in. Thats it, easy installation.
    • Molded tank allows for cheap replacements and extras for switching out resin on the fly
    • Fibreglass reinforced plastic sports increased durability and resistance to corrosion and resin.
    • It is equipped with a rubber seal to ensure that the vat is water-tight to help avoid resin leaks.
    • E10 Vat Max Volume 1500mL without build platform and 700mL with build platform
  • Placeholder
    View Cart
    Add to cart / Details

    ePVA+ Advanced Water Soluble Support

    $129.00 +gst
    PVA is commonly used as a soluble support material for 3d prints. The new ePVA+ works with ABS & many other materials! Some delicate 3d prints or items that need really good surface finish, need to use a lot of support. Because of that, the complex support material can be difficult to manually remove & it can even crack the actual part while being removed. PVA solves the problem because you 3d print the main part with 1 head using PLA & print the supports with the other head using PVA. It is the best soluble material for dual extruder 3d printers especially when printing with PLA. This PVA is top quality & will deliver superb results on any 3D Printer. 0.5Kg roll of 1.75mm filament in a plain natural colour.
  • esun pla+ 3D printing filament white
    View Cart
    Add to cart / Details

    Esun eFlex TPU 87A Flexible 3D Filament 1.75mm 1Kg Natural White

    $45.99 +gst

    Esun eFlex 87A TPU Flexible 3D Printing Filament

    This is grade 87A TPU which is quite flexible, yet slightly easier to 3d print than the softer grade like NinjaFlex 85A or TPE Elastic 83A. Thermoplastic Elastomeric is a broad category of flexible plastic filaments. This grade works well with most popular direct drive extruder 3d printers including Creatbot, Makerbot, FlashForge Creator, Prusa, Wanhao, etc without requiring extensive modifications. It is not the best choice for Bowden style 3d printers, but it has a better chance of working with them over the softer 83 or 85 TPU.. For cheaper bowden machines like Creality Ender, we recommend you start with Grade 95A as it is is easier to print. This is a 1 KG roll of 1.75mm Natural coloured Flexible plastic filament, slightly opague. If you want very rubbery stretchy prints that could even be used for some gaskets, please see our 83A filament. If you want very durable rubbery 3d prints that exhibit some similarity to HDPE / LDPE then please consider PA Nylon Filament
  • Esun Carbon Fibre Nylon 3D Printer Filament in NZ
    View Cart
    Add to cart / Details

    Esun ePACF Carbon Fibre Reinforced Nylon 3D Printer Filament 1.75mm 1Kg

    $79.00 +gst

    eSun PA-CF Carbon Fiber Nylon Filament

    This is Nylon 6 with 20% milled Carbon Fibre in it. This is our best selling Carbon Fiber filament thats easy to 3d print & offers excellent performance at a very affordable price point. Good flame resistance, Flame-retardant Level: UL94-V2;
    Filament ePA-CF
    Impact strength 18.67 KJ/M2
    Tensile Strength 140Mpa
    Elongation at break 10.61%
    Bending strength 140Mpa
    Flexural modulus 4363Mpa
    Heat distortion temperature 155℃

    Recommend Print Settings: Please see our article here on how to 3D Print Carbon Fibre

    Please remember to dry out the rolls in an oven at 70C for at least 4 hrs before 3d printing (even with a brand new roll, drying often helps) Active Heated chamber recommended for the best performance. Consider our Creatbot F-430 3D Printer if you intend to 3D Print Functional Carbon Fibre parts in a production like manner. 3D Printer Store has NZ's Largest range of engineering grade 3D Printing filaments & Carbon Fiber filaments.
  • Esun Black ePLA-Bio Resin New Zealand
    View Cart
    Add to cart / Details

    Esun eResin 3D Printing Resin – 0.5Kg – Black colour

    $29.00 +gst

    Esun Standard Resin - 0.5Kg Black

    This is Esun's stndard resin formulation which works on all popular resin 3d printers of the 380-420nm UV spectrum range including Phrozen, Anycubic, Wanhao, Creality, Elegoo, Longer, etc Perfect for anyone who wants a general purpose rigid resin. For great 3d prints use our Monocure Resinway cleaning solution to clean your resin prints. You can also clean with IPA, methyl spirits, & general alcohols. Newer monochrome LCD screen based 3d printers like the Phrozen Sonic, Transform, Elegoo Mars Pro etc are able to print faster with these resins compared to some older resin formula. For machines with mono lcd we would recommend using Phrozen high speed compatible resins for optimal performance.

    Specifications:

    Hardness (D): 75D Viscosity (25C,mPa.s): 250 to 350 mpa Density: 1.10 to 1.11 g / cm3
  • BLUE-ORANGE-CREEN 3 colour filament
    View Cart
    Select options / Details

    Esun Mystic Triple Colour Metallic Silk PLA 1.75mm

    $37.99 +gst
    This is a Tri-colour filament, it literally means the filament strand is composed of 3 simultaneous colours to form the cross-section. The filament is 3-sided. Esun calls it Mystic Silk PLA, & it comes in a few colour options. Silk PLA gives true metallic shine to it without having to polish it or post-process it. With tri colour silk filament, the object gets a colour & texture you would not be able to make with any other technology, & painting it or coating it in such a way would be an outright headache. 3d printing with dual-colour & tri-colour filaments is a lot of fun, especially for art pieces, kids toys, or school projects. Its the closest we've ever come to a PLA that actually shines like a real metal without having any metal in it. The shine also hides the print layer lines to a greater extent than other colours. This is the same material as the Esun Silk metal colours - imagine multiple filament strands fused into 1.
  • Nylon High Temp Carbon Fiber New Zealand 3D Printer Filament
    View Cart
    Add to cart / Details

    Esun Nylon 12 3D Printer Filament 1.75mm – PA12 Black

    $90.00 +gst

    Esun ePA12 Nylon Filament 1.75mm 1Kg Black

    Nylon 12 has several advantages over the usual Nylon 6 filaments. It has very low moisture abosrption, & far better UV performance. Higher Strength, Better Flexural Strength, High Surface Abrasion Resistance, Excellent Chemical Resistance, & works well with Lubricants. Nylon is suited perfectly in lubricating applications for bearings, gears & pulleys with belts. Nylon is a challenging material to 3d print. Active Heated chamber recommended for the best performance. Please consider advanced 3d printers such as the Creatbot F-430 3D Printer if you intend to 3D Print Functional parts frequently.
  • Esun PA12 Nylon Filament
    View Cart
    Add to cart / Details

    Esun Nylon 12 3D Printer Filament 1.75mm – PA12 White

    $90.00 +gst

    Esun ePA12 Nylon Filament 1.75mm 1Kg White

    Nylon 12 has several advantages over the usual Nylon 6 filaments. It has very low moisture abosrption, & far better UV performance. Higher Strength, Better Flexural Strength, High Surface Abrasion Resistance, Excellent Chemical Resistance, & works well with Lubricants. Nylon is suited perfectly in lubricating applications for bearings, gears & pulleys with belts. Nylon is a challenging material to 3d print. Active Heated chamber recommended for the best performance. Please consider advanced 3d printers such as the Creatbot F-430 3D Printer if you intend to 3D Print Functional parts frequently.
  • Nylon 12 Carbon Fiber 3D Printer Filament
    View Cart
    Add to cart / Details

    ESun PA12CF Nylon 12 Carbon Fiber 3D Filament

    $135.00 +gst

    Esun Nylon 12 Carbon Fiber Now in NZ!

    We're really proud to be the first to introduce this highly sought after Nylon 12 grade Carbon Reinforced 3d filament in New Zealand. Most other filaments are Nylon 6. Our PA12 opens up possibilities that PA6 might not be capable enough to handle. Nylon PA12 far less moisture absorption making PA12 CF more suited to use in close aqueous or wet conditions even in contact with water. PA6 can get soft if it left in water for very long. Nylon 12 also handles much hotter temperatures, is much stiffer than Nylon 6, & even stronger - better than Nylon 6/6 as well. Nylon 12 also has excellent anti static properties. It is also UL94 V2 Flame Retardant for a continuous running temp of 120C making it perfect for electronics housings. Please be aware that Carbon Fiber however is slightly conductive, so if you need insulative properties, then the Glass Fiber Reinforced Nylon Filament will be a better choice. This is a 1Kg reel of 1.75mm filament. Carbon Fiber is always matte Black in colour (a very dark grey)
  • Esun Blue petg 3d printing filament NZ
    View Cart
    Add to cart / Details

    eSun PetG 3D Filament 1.75mm 1Kg SOLID BLUE

    $33.99 +gst
    Pet-G is very good functional material & its easier to work with than Abs. It is the same food safe PET thats used in water bottles etc It does not shrink or warp as easily as Abs does, & thus provides good dimensional accuracy for beginners who want to move up from PLA+. It provides excellent finish, high tensile strength, & has a high Glass Transition Temperature of 80 deg C. It is highly recommended for those who want high temperature & high strength properties compared to PLA. Esun PETg 1Kg 1.75mm SOLID BLUE For recommended settings on how to 3D Print PETg & TGlase please read our FAQ here
  • esun petg+ solidgreen 3D printing filament NZ
    View Cart
    Add to cart / Details

    eSun PetG 3D Filament 1.75mm 1Kg SOLID GREEN

    $33.99 +gst
    Pet-G is very good functional material & its easier to work with than Abs. It is the same food safe PET thats used in water bottles etc It does not shrink or warp as easily as Abs does, & thus provides good dimensional accuracy for beginners who want to move up from PLA+. It provides excellent finish, high tensile strength, & has a high temperature Glass Transition Temperature of 80 deg C. It is highly recommended for those who want high temperature & high strength properties compared to PLA. Esun PETg 1.75mm 1Kg SOLID GREEN All coloured PETg is slightly translucent compared to other materials.
  • esun petg red 3D printing filament nz
    View Cart
    Add to cart / Details

    Esun PetG 3D Filament 1.75mm 1Kg SOLID RED

    $33.99 +gst
    Pet-G is very good functional material & its easier to work with than Abs. It is the same food safe PET thats used in water bottles etc It does not shrink or warp as easily as Abs does, & thus provides good dimensional accuracy for beginners who want to move up from PLA+. It provides excellent finish, high tensile strength, & has a higher Glass Transition Temperature of 70 deg C. It is highly recommended for those who want high temperature & high strength properties compared to PLA. Esun PetG 1.75mm 1Kg RED is a solid, bright red colour, not translucent. For recommended settings on how to 3D Print PETg & TGlase please read our FAQ here
  • eSun PetG 3d printing filament NZ
    View Cart
    Add to cart / Details

    eSun PetG 3D Filament 1.75mm 1Kg SOLID WHITE

    $33.99 +gst
    Pet-G is very good functional material & its easier to work with than Abs. It is the same food safe PET thats used in water bottles etc It does not shrink or warp as easily as Abs does, & thus provides good dimensional accuracy for beginners who want to move up from PLA+. It provides excellent finish, high tensile strength, & has a high temperature Glass Transition Temperature of 80 deg C. It is highly recommended for those who want high temperature & high strength properties compared to PLA. Esun PETg 1.75mm 1Kg SOLID WHITE For recommended settings on how to 3D Print PETg & TGlase please read our FAQ here
  • esun Petg yellow 3d filament nz
    View Cart
    Add to cart / Details

    eSun PetG 3D Filament 1.75mm 1Kg SOLID YELLOW

    $33.99 +gst
    Pet-G is very good functional material & its easier to work with than Abs. It is the same food safe PET thats used in water bottles etc It does not shrink or warp as easily as Abs does, & thus provides good dimensional accuracy for beginners who want to move up from PLA+. It provides excellent finish, high tensile strength, & has a high temperature Glass Transition Temperature of 80 deg C. It is highly recommended for those who want high temperature & high strength properties compared to PLA. Esun PETg 1.75mm 1Kg SOLID YELLOW For recommended settings on how to 3D Print PETg & TGlase please read our FAQ here
  • Sale!
    PLA matte 3d printing filament New Zealand
    View Cart
    Select options / Details

    Esun PLA Matte Light Weight filament 1.75mm 1Kg – Many Colours

    $24.99 – $37.99 +gst
    Introducing ePLA-Matte by Esun, a matted PLA that is designed for users who want a non-glossy PLA filament. Most PLA has a sheen or a slightly shiny glossy look. The matte surface greatly reduces layer lines. Esun PLA Matte has a very pastel look, & is perfect for applications like architecture. Esun Matte PLA is an environmentally friendly bio material and easy to print just like all PLA filament. To improve sustainability,  the reel is made by injection molding reeused filament production waste and other industrial waste. And the outer box is made of recyclable paper. This enables 3D printing to be more aligned with New Zealand's environmental protection goals & climate emergency. Many colours available: Black, Dark Grey, White, Mint Green, Almond Yellow, Peach Pink, Light Blue, Light Khaki. Please choose colours from the drop down below.
  • Sale!
    esun PLA High Speed Black filament
    View Cart
    Select options / Details

    Esun PLA-HS High Speed High Flow Filament 1.75mm 1Kg – Choose Colour

    Original price was: $34.99.Current price is: $29.99. +gst
    Introducing ePLA-HS by Esun, also called PLA-HF. Compared with normal materials, the printing speed is faster, the quality of the surface of printed object is higher, and the detail performance is better. The ePLA-HS has good adaptability. By adjusting the materials, the high speed printing reduces the dependence on the cooling power of the printer and improves the printing performance. This high flow PLA can be used in concept models and rapid prototyping. Many colours available: Black, White, Grey, Red and Blue. Please choose colours from the drop down below.
  • Sale!
    esun PLA High Speed Black filament
    View Cart
    Add to cart / Details

    Esun PLA+HS High Speed PLA+ Black

    Original price was: $36.00.Current price is: $29.00. +gst

    Esun High Speed PLA Plus 1Kg Black 3D Printer Filament now in NZ

    PLA+ HS is the new version of the PLA+ you love, now with High Speed 3d printing capability! Get the higher flexibility, impact strength & easy to remove supports that you like about PLA+, not with any 3d printer including Bambu labs, Creality K1, Phrozen Arco etc. As easy to print as standard PLA+ & yet highly functional, PLA+HS is the future of PLA. Fast printing requires materials that can melt and cool quickly. However, to balance the speed of material melting and cooling, the physical properties of materials printed at fast speeds usually declines. In order to provide 3D printed products with superior mechanical performance despite being printed fast, Esun has developed an upgraded formulation of PLA+ called ePLA+HS is specifically designed to match high-speed printing and offers enhanced toughness. It continues to work perfectly on all 3D Printers so you can 3d print with thicker nozzles more easily. This will mean faster 3d printing for everyone, & not just for a Bambu or a K1. PLA is naturally sourced, compostible & bio-degradable. It is the easiest material to 3d print. Our range of eSun PLA+HS colours is growing everyday. This is the eSun solid Black.
  • Sale!
    PLA+HS PLA+ Bone White
    View Cart
    Add to cart / Details

    Esun PLA+HS High Speed PLA+ Bone White

    Original price was: $36.00.Current price is: $29.00. +gst

    Esun High Speed PLA Plus 1Kg Bone White 3D Printer Filament now in NZ

    PLA+ HS is the new version of the PLA+ you love, now with High Speed 3d printing capability! Get the higher flexibility, impact strength & easy to remove supports that you like about PLA+, not with any 3d printer including Bambu labs, Creality K1, Phrozen Arco etc. As easy to print as standard PLA+ & yet highly functional, PLA+HS is the future of PLA. Fast printing requires materials that can melt and cool quickly. However, to balance the speed of material melting and cooling, the physical properties of materials printed at fast speeds usually declines. In order to provide 3D printed products with superior mechanical performance despite being printed fast, Esun has developed an upgraded formulation of PLA+ called ePLA+HS is specifically designed to match high-speed printing and offers enhanced toughness. It continues to work perfectly on all 3D Printers so you can 3d print with thicker nozzles more easily. This will mean faster 3d printing for everyone, & not just for a Bambu or a K1. PLA is naturally sourced, compostible & bio-degradable. It is the easiest material to 3d print. Our range of eSun PLA+HS colours is growing everyday. This is the eSun Bone White.
  • Sale!
    pla+hs pla+ fiilament white
    View Cart
    Add to cart / Details

    Esun PLA+HS High Speed PLA+ Cold White

    Original price was: $36.00.Current price is: $29.00. +gst

    Esun High Speed PLA Plus 1Kg Cold White 3D Printer Filament now in NZ

    PLA+ HS is the new version of the PLA+ you love, now with High Speed 3d printing capability! Get the higher flexibility, impact strength & easy to remove supports that you like about PLA+, not with any 3d printer including Bambu labs, Creality K1, Phrozen Arco etc. As easy to print as standard PLA+ & yet highly functional, PLA+HS is the future of PLA. Fast printing requires materials that can melt and cool quickly. However, to balance the speed of material melting and cooling, the physical properties of materials printed at fast speeds usually declines. In order to provide 3D printed products with superior mechanical performance despite being printed fast, Esun has developed an upgraded formulation of PLA+ called ePLA+HS is specifically designed to match high-speed printing and offers enhanced toughness. It continues to work perfectly on all 3D Printers so you can 3d print with thicker nozzles more easily. This will mean faster 3d printing for everyone, & not just for a Bambu or a K1. PLA is naturally sourced, compostible & bio-degradable. It is the easiest material to 3d print. Our range of eSun PLA+HS colours is growing everyday. This is the eSun Cold White.
  • Sale!
    high speed pla grey filament
    View Cart
    Add to cart / Details

    Esun PLA+HS High Speed PLA+ Gray

    Original price was: $36.00.Current price is: $29.00. +gst

    Esun High Speed PLA Plus 1Kg Grey 3D Printer Filament now in NZ

    PLA+ HS is the new version of the PLA+ you love, now with High Speed 3d printing capability! Get the higher flexibility, impact strength & easy to remove supports that you like about PLA+, not with any 3d printer including Bambu labs, Creality K1, Phrozen Arco etc. As easy to print as standard PLA+ & yet highly functional, PLA+HS is the future of PLA. Fast printing requires materials that can melt and cool quickly. However, to balance the speed of material melting and cooling, the physical properties of materials printed at fast speeds usually declines. In order to provide 3D printed products with superior mechanical performance despite being printed fast, Esun has developed an upgraded formulation of PLA+ called ePLA+HS is specifically designed to match high-speed printing and offers enhanced toughness. It continues to work perfectly on all 3D Printers so you can 3d print with thicker nozzles more easily. This will mean faster 3d printing for everyone, & not just for a Bambu or a K1. PLA is naturally sourced, compostible & bio-degradable. It is the easiest material to 3d print. Our range of eSun PLA+HS colours is growing everyday. This is the eSun solid Gray.
  • Sale!
    PLA+ HS Light Brown PLA+
    View Cart
    Add to cart / Details

    Esun PLA+HS High Speed PLA+ Light Brown

    Original price was: $36.00.Current price is: $29.00. +gst

    Esun High Speed PLA Plus 1Kg Light Brown 3D Printer Filament now in NZ

    PLA+ HS is the new version of the PLA+ you love, now with High Speed 3d printing capability! Get the higher flexibility, impact strength & easy to remove supports that you like about PLA+, not with any 3d printer including Bambu labs, Creality K1, Phrozen Arco etc. As easy to print as standard PLA+ & yet highly functional, PLA+HS is the future of PLA. Fast printing requires materials that can melt and cool quickly. However, to balance the speed of material melting and cooling, the physical properties of materials printed at fast speeds usually declines. In order to provide 3D printed products with superior mechanical performance despite being printed fast, Esun has developed an upgraded formulation of PLA+ called ePLA+HS is specifically designed to match high-speed printing and offers enhanced toughness. It continues to work perfectly on all 3D Printers so you can 3d print with thicker nozzles more easily. This will mean faster 3d printing for everyone, & not just for a Bambu or a K1. PLA is naturally sourced, compostible & bio-degradable. It is the easiest material to 3d print. Our range of eSun PLA+HS colours is growing everyday. This is the eSun Light Brown.
  • Sale!
    esun pla+ pinek green 3D printing filament NZ
    View Cart
    Add to cart / Details

    Esun PLA+HS High Speed PLA+ Pine Green

    Original price was: $36.00.Current price is: $29.00. +gst

    Esun High Speed PLA Plus 1Kg Pine Green 3D Printer Filament now in NZ

    3D Print with PLA+ & get higher flexibility, impact strength & easy to remove supports. As easy to print as standard PLA+ & yet highly functional, PLA+HS is the future of PLA. Fast printing requires materials that can melt and cool quickly. However, to balance the speed of material melting and cooling, the physical properties of materials printed at fast speeds usually declines. In order to provide 3D printed products with superior mechanical performance despite being printed fast, Esun has developed an upgraded formulation of PLA+ called ePLA+HS is specifically designed to match high-speed printing and offers enhanced toughness. It continues to work perfectly on all 3D Printers so you can 3d print with thicker nozzles more easily. This will mean faster 3d printing for everyone, & not just for a Bambu or a K1. PLA is naturally sourced, compostible & bio-degradable. It is the easiest material to 3d print. Our range of eSun PLA+HS colours is growing everyday. This is the eSun Solid Pine Green. For a lighter more standard Green, please buy the Peak Green Colour. And for a darker more military green look, please consider the Esun Olive Green.
  • Sale!
    View Cart
    Add to cart / Details

    Esun PLA+HS High Speed PLA+ Warm White

    Original price was: $36.00.Current price is: $29.00. +gst

    Esun High Speed PLA Plus 1Kg Warm White 3D Printer Filament now in NZ

    PLA+ HS is the new version of the PLA+ you love, now with High Speed 3d printing capability! Get the higher flexibility, impact strength & easy to remove supports that you like about PLA+, not with any 3d printer including Bambu labs, Creality K1, Phrozen Arco etc. As easy to print as standard PLA+ & yet highly functional, PLA+HS is the future of PLA. Fast printing requires materials that can melt and cool quickly. However, to balance the speed of material melting and cooling, the physical properties of materials printed at fast speeds usually declines. In order to provide 3D printed products with superior mechanical performance despite being printed fast, Esun has developed an upgraded formulation of PLA+ called ePLA+HS is specifically designed to match high-speed printing and offers enhanced toughness. It continues to work perfectly on all 3D Printers so you can 3d print with thicker nozzles more easily. This will mean faster 3d printing for everyone, & not just for a Bambu or a K1. PLA is naturally sourced, compostible & bio-degradable. It is the easiest material to 3d print. Our range of eSun PLA+HS colours is growing everyday. This is the eSun Warm White.
  • Sale!
    PLA+hs yellow PLA+ filament
    View Cart
    Add to cart / Details

    Esun PLA+HS High Speed PLA+ Yellow

    Original price was: $36.00.Current price is: $29.00. +gst

    Esun High Speed PLA Plus 1Kg Yellow 3D Printer Filament now in NZ

    PLA+ HS is the new version of the PLA+ you love, now with High Speed 3d printing capability! Get the higher flexibility, impact strength & easy to remove supports that you like about PLA+, not with any 3d printer including Bambu labs, Creality K1, Phrozen Arco etc. As easy to print as standard PLA+ & yet highly functional, PLA+HS is the future of PLA. Fast printing requires materials that can melt and cool quickly. However, to balance the speed of material melting and cooling, the physical properties of materials printed at fast speeds usually declines. In order to provide 3D printed products with superior mechanical performance despite being printed fast, Esun has developed an upgraded formulation of PLA+ called ePLA+HS is specifically designed to match high-speed printing and offers enhanced toughness. It continues to work perfectly on all 3D Printers so you can 3d print with thicker nozzles more easily. This will mean faster 3d printing for everyone, & not just for a Bambu or a K1. PLA is naturally sourced, compostible & bio-degradable. It is the easiest material to 3d print. Our range of eSun PLA+HS colours is growing everyday. This is the eSun solid Yellow.
  • esun silk pla bronze filament nz
    View Cart
    Add to cart / Details

    Esun Silk PLA 1.75mm – Bronze Metallic

    $35.00 +gst
    For a long time, we've wanted MORE PLA that has a true metallic shine to it without having to polish it. Please welcome Esun Silk metal PLA in BRONZE. This is a roll of Bronze & you have to see it to believe how amazing this new formulation of silk metal PLA is! Its the closest we've ever come to a PLA that actually shines like a real metal without having any metal in it. The shine also hides the print layer lines to a greater extent than other colours. And its Extremely affordable. We are sure our New Zealand 3D Printer enthusiasts will enjoy this material.
  • esun pla esilk cyan filament nz
    View Cart
    Add to cart / Details

    Esun Silk PLA 1.75mm – Cyan

    $29.99 +gst
    Silk PLA has a true metallic shine to it without having to polish it. Please welcome Esun Silk PLA in a range of colours. Its the closest we've ever come to a PLA that actually shines like a real metal without having any metal in it. The shine also hides the print layer lines to a greater extent than other colours. And its Extremely affordable. We are sure our Creative & Artistic 3D Printer users will enjoy this material. 3D Printed Trophies, Medals, Awards, & Jewellery is so easy & so good looking thanks to this Silk filament.
  • esun pla esilk green filament nz
    View Cart
    Add to cart / Details

    Esun Silk PLA 1.75mm – Green

    $29.99 +gst
    Silk PLA has a true metallic shine to it without having to polish it. Please welcome Esun Silk PLA in a range of colours. Its the closest we've ever come to a PLA that actually shines like a real metal without having any metal in it. The shine also hides the print layer lines to a greater extent than other colours. And its Extremely affordable. We are sure our Creative & Artistic 3D Printer users will enjoy this material. 3D Printed Trophies, Medals, Awards, & Jewellery is so easy & so good looking thanks to this Silk filament.
  • esun pla esilk lime filament nz
    View Cart
    Add to cart / Details

    Esun Silk PLA 1.75mm – Lime

    $29.99 +gst
    Silk PLA has a true metallic shine to it without having to polish it. Please welcome Esun Silk PLA in a range of colours. Its the closest we've ever come to a PLA that actually shines like a real metal without having any metal in it. The shine also hides the print layer lines to a greater extent than other colours. And its Extremely affordable. We are sure our Creative & Artistic 3D Printer users will enjoy this material. 3D Printed Trophies, Medals, Awards, & Jewellery is so easy & so good looking thanks to this Silk filament.
  • esun pla esilk red filament nz
    View Cart
    Add to cart / Details

    Esun Silk PLA 1.75mm – Red

    $29.99 +gst
    Silk PLA has a true metallic shine to it without having to polish it. Please welcome Esun Silk PLA in a range of colours. Its the closest we've ever come to a PLA that actually shines like a real metal without having any metal in it. The shine also hides the print layer lines to a greater extent than other colours. And its Extremely affordable. We are sure our Creative & Artistic 3D Printer users will enjoy this material. 3D Printed Trophies, Medals, Awards, & Jewellery is so easy & so good looking thanks to this Silk filament.
  • esun pla esilk yellow filament nz
    View Cart
    Add to cart / Details

    Esun Silk PLA 1.75mm – Yellow

    $29.99 +gst
    Silk PLA has a true metallic shine to it without having to polish it. Please welcome Esun Silk PLA in a range of colours. Its the closest we've ever come to a PLA that actually shines like a real metal without having any metal in it. The shine also hides the print layer lines to a greater extent than other colours. And its Extremely affordable. We are sure our Creative & Artistic 3D Printer users will enjoy this material. 3D Printed Trophies, Medals, Awards, & Jewellery is so easy & so good looking thanks to this Silk filament.
  • eSun Black 3d printer 1.75mm Filament New Zealand
    View Cart
    Add to cart / Details

    Esun TPU 95A Flexible 3D Printing Filament 1.75mm 1Kg Black

    $45.99 +gst

    Flexible Plastic TPU95 Filament

    Thermoplastic PolyUrethane is a very popular flexible plastic. It is very easy to 3d print TPU compared to other types of TPE materials. It works well with most popular 3d printers including Creatbot, Makerbot, FlashForge, Prusa, Creality, etc It is an ideal first flexible material for designs where you need flexiblity without wanting excessive expansion & elongation. If you want rubbery stretchy prints, then please see our NinjaFlex filament. If you want very strong Flexible 3d prints that exhibit some similarity to HDPE / LDEP then please consider NinjaTech Cheetah Filament This listing is for a 1 KG roll of 1.75mm Flexible plastic filament. Also available in 3mm filament (2.85mm diameter), please see other listing.
  • FlashForge Adventurer 3 3D Printer Extruder Board New Zealand
    View Cart
    Details

    Extruder Board for FlashForge Adventurer 3D Printer

    Extruder Circuit Board for FlashForge Adventurer 3 3D Printers
  • Creatbot F430 extruder head mini board
    View Cart
    Add to cart / Details

    F430 Extruder Head Miniboard

    $69.00 +gst
    This is the small PCB that goes behind the extruders of a Creatbot F430 head. The main ribbon cable connects to it from the motherboard underneath the machine. And other connectors such as the temp sensors, cartridge heaters, probe etc plug into this little board.
  • FEP Film LCD DLP SLA Resin 3D Printers New Zealand
    View Cart
    Add to cart / Details

    FEP Film – 100 micron – A5 size single

    $9.00 +gst
    Small Size FEP Film for common SLA Resin 3D Printers This FEP Film is suitable for Phrozen Sonic Mini, Wanhao D7, Anycubic Photon, Creality LDR, Elegoo Mars etc DLP LCD 3D Printers that all use around the same Vat size. This will work with Metal or Plasticvats. Very easy to use. Simply open the screws on your vat, remove the old FEP sheet, & put this sheet in place. Please see the video below to see how easily you can change the FEP on your Phrozen Sonic Mini Resin 3D Printers. You should change your FEP film when its cloudy, has excessive scratches, or you find the prints stick to it too easily rather than the bed. Depending on several factors, this is usually around 200 hrs of use. FEP is like a car tyre, you can have the best mechanics but without a good tyre, you're asking for trouble. We keep our prices on consumables cheap to help kiwis get the best results with 3d printers without prolonging the need to replace important components. Also check out the PlateBond Adhesion Promotor to help your base layers stick better to the bed of your resin 3d printer.
  • 3D Scanner 3D Printer STEM Combo 3D Printing Services NZ
    View Cart
    Details

    Flash Forge Adventurer 3 3D Printer + Matter & Form V2 3D Scanner – Beginners Package

    The perfect Beginners 3D Printer & 3D Scanner combo

    Great for hobbyists, schools, or a great gift to help your child cultivate Creativity & Critical Thinking in today's STEM world. Includes our best selling entry level 3D Printer the FlashForge Adventurer 3 coupled with the super compact & fun to use V2 3D Scanner designed by the Canadian company Matter & Form. Check out the superb Flash Forge Adventurer 3 3D Printer here. And the Matter Form V2 3D Scanner here. Happy 3D Printing & 3D Scanning.
  • FlashForge Adventurer 4 3D Printer New Zealand
    View Cart
    Details

    FlashForge Adventurer 4 3D Printer

    Why buy the newest FlashForge Adventurer 4 3D Printer?

    The FlashForge Adventurer 4 is now the best entry level 3D Printer in New Zealand. Features: Enclosed unit Wifi Webcam to monitor prints Print remotely via the Cloud with Free FlashForge software Automatic Levelling 3D Print most common materials like PLA, PET, ABS, Metal, Wood, Silk, & Flexible One-click easy swappable hot end & build platform. Super Easy to use, even for children All free software included Works with common 3d printing filaments, no expensive proprietary cartridges. Extremely silent At home in any environment, whether home, office or school. Flashforge Adventurer 4, supporting large volume printing, auto leveling, and supporting multiple-machines controlled in one computer, better catering for printing needs from personal individuals, schools, education setups, and small office users.
  • Creator 3 3D Printer magnetic flex build plate New Zealand
    View Cart
    Details

    FlashForge Creator 3 Magnetic Build Plate Upper Sheet

    This is the flexible metal plate that fits on the new magnetic beds of FlashForge Creator 3 3D Printers. It has a Polycarbonate re-inforced build surface that provides excellent adhesion to most common materials. However, for Nylon based materials, we still recommend you put a thin layer of the glue stick on it.
  • creator 4 nozzle assembly au nz
    View Cart
    Add to cart / Details

    FlashForge Creator 3 Pro Hot End Nozzle Assembly

    $90.00 +gst
    This is the full hot end which gives you new extrusion components under the motor. It includes the heat brake, throat tube, hot block, & a 0.4mm nozzle. It comes fitted with a new cartridge heater & a thermocouple temp sensor as well.
  • FlashFroge Creator 3 PRO IDEX 3D Printer
    View Cart
    Details

    FlashForge Creator 3 PRO IDEX 3D Printer

    Flash Forge Creator 3 PRO 3D Printer with IDEX technology

    In stock in Auckland & ready to pickup or ship. Free Shipping NZ Wide! The Creator 3 Pro is the Latest version of the well established FlashForge Creator 3 3D Printer. It is an update to the Creator 3 V2. IDEX ( Independent Dual Extruders ) is a cutting edge head system that allows both extruders to work independently, without the heads interfering in each others build process. Please see our Blog Article here on IDEX Technology to learn why you would want this ground-breaking technology.

    Key Features:

    - Auto Levelling with nozzle sensor - High Temperature Carbon Fiber compatible 320C Extruder Heads - Wifi - Webcam - Cloud 3D Printing & Remote Monitoring The Creater 3 is designed to adopt the more advanced 3d printing techniques like multi-material, multi-colour, soluble support, & part cloning needs. This machine also offers cloning, & acts like 2 3D Printers in 1 box. Printers with IDEX technology have costed $20K+, but thats all changed with this game changer 3D Printer. We are the only company in New Zealand that has the latest version, watch out for other's still selling the older versions (& that too at higher prices) Full tech specs on the machine below.
  • Build tak bed mat sheet sticks onto metal 3d printer beds
    View Cart
    Details

    Flashforge Creator 3 Upper Mat sticker for flex steel build plate

    This is the mat that sticks onto the spring steel build plate, which adheres on the magnetic 3D Printer bed of 3d printers like FlashForge Creator 3, 3 Pro & 3 Pro v2 . It can also be used on any 3d printer that has a 300x250mm build volume & you want a good quality surface mat. This item is only the top build tak style mat, that you can 3d print on. The photo is to show you how the mat is to be used in relation to a Creator series 3d printer. This is a sticker, it has glue on 1 side, just peel it & stick it onto any surface. It is a Polycarbonate re-inforced build surface that provides excellent adhesion to most common materials. However, for Nylon based materials, it will be best to put a thin layer of the glue stick on it. Some Flashforge mats are blue, & some are black - they are exactly the same mat, flashforge just changed colours between the machine releases.
  • Placeholder
    View Cart
    Add to cart / Details

    FlashForge Creator 4 Extruder HS/HT/F

    $299.00 +gst
    Full Swappable Extruder Head for the new FlashForge Creator 4 3D Printer. 3 Extruder options available: HS Extruder = High Temp 360C Extruder including Carbon Fiber filled materials. HT Extruder = upto 320C temp for common plastics including PLA/ABS. F Extruder = Specialist flexible filament extruder for high flex TPU TPE & similar materials. Please specify which head you want on the order notes.
  • FlashForge Creator 4 3d printer 5 heads Australia NZ
    View Cart
    Details

    FlashForge Creator 4 S IDEX 3D Printer

    The cutting edge new FlashForge Creator 4 S high temp package. A Large 3d printer with a build volume of 400 x 350 x 500mm & Independant Dual Extruders. We are proud to be the only company offering the Creator 4 S version with 5 HEADS that include all 3 Types of heads included FREE with the machine. Thats 5 TOTAL Heads! We include 2x HT high temp head, 2x HS Carbon Fiber special head, & the special F series flexible 2.85 Extruder head - all included. Do not underestimate the advantage of the F series 2.85mm head, its the best way to 3d print flexible TPU materials like NinjaFlex fast & reliably. We even include the magnetic removable Flex series 3d printer bed plates with PEI. This full 5 head package is worth over $1500 - FREE! Only when you buy the FlashForge Creator 4 from 3D Printer Store - NZ's largest FlashForge reseller. And you'll get Free Training too, only at 3D Printer Store. If you find a better price or service level in New Zealand or Australia, please come talk to us. We aim to be the best on price & service. 3D Printer Store is New Zealand & Australia official FlashForge supplier: Flashforge distributor | agent | dealers - FlashForge Size, Speed, & High Temperature capability rolled into 1 additive manufacturing powerhouse at a price that doesn't break the bank. Multi matieral capability, soluble support, Part cloning, & advanced thermoplastics - this 3d printer prints just as great as it looks. We also supply the matching Filament Drying Station - ask us for a package deal. Price on Enquiry
  • FlashForge Creator 3d printer hot end thermocouple
    View Cart
    Add to cart / Details

    FlashForge Creator Hot End Thermocouple Temp sensor

    $25.00 +gst
    This is a temperature sensor for the newer FlashForge Creator Pro 2 & Creator 3 Pro 3d printers. It is a threaded type that fits into the hot end block. This is not for older flashforge Creator series printers.
  • Flashfoge Creator 2 IDEX 3D Printer
    View Cart
    Details

    FlashForge Creator Pro 2 3D Printer

    Flash Forge Creator PRO 2 IDEX 3D Printer Dual Extruder Heads

    The world's easiest to use Dual Head 3D Printer is now in NZ. Please welcome the simple & reliable FlashForge Creator Pro V2. The V2 is the latest update to the popular & proven FlashForge Creator Pro 3D Printer, giving it Independant Dual Extruders! You can 3d print 2 materials or colours, & do many other cool projects with this 3d printer. This 3d printer is great for entry level users who want a little bit more capability, but do not want to miss out on simplicity & ease of use. Its perfect for the education sector, great for schools & colleges, even with younger primary or intermediate school age children. It is also excellent for serious hobbyists who want a machine that they can grow with as they get more into 3d printing. Build volume 200mm x 150 x 148mm With things like automatic levelling & a fully guided assisted setup, you will be printing in no time. This is not the kit, you don't have to assemble it all from scratch like other cheaper 3d printers. Aside from attaching the heads, you do not need to do anything to start printing. It will allow you to 3d print with a vast range of prosumer materials with ease. So what is an IDEX 3D Printer & why would you want it? Please have a read of our article here to learn more. 
 
 
 
  Excellent  
    
 Based on 63 reviews 
  
 
 
 
 
 
 
  
 
 
 
 Alex L 
 
 
 Alex L 
 
2023-11-28
 
 
  
I have dealt with the 3D Printer Store for several months now and have to say that the experience has been very positive.
Zubbin is extremely knowledgeable in this field, enthusiastic, honest and responsive.
Pre and Post Purchase customer support has been great. He will have your best interest in mind and will recommend the best product for your needs.
My positive experience dealing with him professionally has led me to buy product from him for personal use.

We are very lucky to have such a supplier providing these kinds of specialized 3D Printers, Filaments, accessories and services in New Zealand.

The rare filaments can sometimes be difficult to source but he will do his best to find alternatives to get what's needed ASAP or even suggest proper alternatives.

I am looking forward to future collaboration with this supplier.
  
 
  
 
 
 
 Elias Bayless 
 
 
 Elias Bayless 
 
2023-10-18
 
 
  
First choice for all my 3d printing needs, the team here really does a great job! Always get my filament here and it arrives really fast and always performs very well in my printer.
  
 
  
 
 
 
 Lyle Adams 
 
 
 Lyle Adams 
 
2023-10-18
 
 
  
I recently purchased a 3D printer from this business and also took their training. Zubbin's knowledge and assistance is top-notch. He provided valuable insights not only on 3D printing but also related topics. Highly recommended!!
  
 
  
 
 
 
 Dylan Cooper 
 
 
 Dylan Cooper 
 
2023-09-19
 
 
  
Solid company to deal with. I have ordered filament multiple times from this company. I have also been advised on better filament options than what I ordered, which worked out really well. Will continue to shop here!
  
 
  
 
 
 
 Maarten van den Heuvel 
 
 
 Maarten van den Heuvel 
 
2023-08-21
 
 
  
Good prices, fast shipping, excellent communication and when there was a hiccup with my order it was sorted super fast and to my full satisfaction. Can recommend.
  
 
  
 
 
 
 Phil Shimmin 
 
 
 Phil Shimmin 
 
2023-08-16
 
 
  
Great service from these guys. On my most recent order there was a stellar turnaround of only 24 hours between initial stock query and the filament being in my printer.
  
 
  
 
 
 
 Dan King 
 
 
 Dan King 
 
2022-09-29
 
 
  
Shipping and packaging was excellent and best in market pricing. I had an issue with a misunderstanding about the particular properties of the resin I purchased but Zubbin responded quickly and helped me resolve the issue. Perfect customer service, they have gained a loyal customer.
  
 
  
 
 
 
 Mike O 
 
 
 Mike O 
 
2022-09-12
 
 
  
These guys are awesome. I used to buy my filament from overseas for my projects and needed something in a hurry and went looking for something local. I'm so glad I did. Not only are the prices as good or better than what I was getting overseas and even more of a deal when considering the pricing I was paying for shipping their turn around each time has been next day. Great range of in stock filaments, good prices, super fast turn around and excellent customer service.
  
 
  
 
 
 
 Dion Hitchens 
 
 
 Dion Hitchens 
 
2022-08-09
 
 
  
Kia ora,
This is a fantastic business selling reliable machines at a great price point. What I am impressed with the most is that the owner is always willing to help if I have a problem his insight and knowledge he is so willing to share is always on point and allows me to solve the problem I am trying to resolve.
I look forward to doing more business with them.
thanks
  
 
  
 
 
 
 Michael Williams 
 
 
 Michael Williams 
 
2022-06-28
 
 
  
Sent them an email explaining what I was trying to achieve and asked for their advice. They responded promptly and recommend a basic 3d printer which turned out absolutely fit for purpose. Ordered online and with good communication i had printer within days. Will definitely return when I upgrade. This printing stuff is very addictive.