3D Printer Shop

Home » 3D Printer Shop

NZ’s Biggest range of everything 3D Printing

We’ve got new items coming in, & specials running on selected products frequently.

Check out all the new Resins we stock – Monocure Australia, Phrozen high speed 3d printing resins all at superb Prices too!
The worlds strongest Nylon HT Filaments now available. There’s also advanced PEI materials on offer.
To explore everything we have on special, please click here or on SALE link in the menu.

t&cs apply.

  • Vacuum Former

    Vacuum Former (2)

  • 3D Print Service

    3D Print Service (5)

  • 3d printer repair service NZ

    3d printer repair service NZ (3)

  • Brands

    Brands (141)

  • 3D Printing Resin

    3D Printing Resin (32)

  • 3D Printers

    3D Printers (26)

  • 3D Printer Parts & Accessories

    3D Printer Parts & Accessories (73)

  • 3D Printing Bundles

    3D Printing Bundles (5)

  • 3D Printing Filament

    3D Printing Filament (47)

  • 3D Scanners

    3D Scanners (1)

  • Generic Image Placeholder
    View Cart
    Add to cart / Details

    3D Printer Repair at our site

    $120.00 +gst
    Book a service or repair for your 3d printer to be done at our office. Please drop off or ship the machine to us. This can include repair or standard maintenance related issues. This booking includes up to 1 hour of our time in repairing or servicing the machine. Please read our Terms of Repair here: https://3dprintingservices.co.nz/3d-printer-repair-service/ Pay particular attention to the points in Bold. By purchasing the repair service, you agree to the terms in full. If your machine can't be fixed, or parts are not available for example, then we will discuss those options with you. But kindly note you will still have to pay the first hour fee as our minimum assessment charge regardless of whether the machine can be repaired or not. If the 3d printer can't be brought over, we also offer a call out service to your site, mainly in the Auckland region. We mainly offer this service to the Auckland region, but can discuss coming over anywhere in New Zealand Please have a read here. Please read our 3D printer repair page to fully understand our charges & processes. Proceeding with a booking indicates you accept our Terms & Conditions. Repair starts only after payment clears. We have the right to refuse to repair & refund the cost for any reason whatsoever.
  • Sale!
    kids low temp safe 3d pen
    View Cart
    Add to cart / Details

    3D Printing Pen – Low Temperature – Kid Safe

    Original price was: $59.00.Current price is: $45.00. +gst
    Kid friendly 3D Printing Pen This 3D Printing Pen is specially made for children's hands and works with filaments at a lower temperature than regular 3D pens. It allows for children to explore their creative side safely. The pen works with special filaments that work at just 50C (the same as standard hot water tap). It comes with template sheets, so kids can trace on them & then fold onto a 3d object. Makes it really easy to start making 3d models without having to fully visualise each side. A bit like a Lego instruction booklet you can follow, before you make your own. Suitable for PCL Filament which is low temperature. This pen is not for higher temperature filaments such as PLA etc. For PLA or similar, please buy our standard version 3d pen.
  • Sale!
    3d printing pen pla abs
    View Cart
    Add to cart / Details

    3D Printing Pen – PLA ABS – Make, Repair or Highlight

    Original price was: $69.00.Current price is: $59.00. +gst
    This 3D Printing Pen is a versatile tool designed for 3D printing enthusiasts. Compatible with both PLA and ABS filaments, it allows for the creation of detailed artworks and functional prototypes with precision. It is also used to join prints, highlight them with colours, or repair any blemishes. Featuring advanced heating technology, this pen ensures smooth filament flow and strong adhesion, making it ideal for a wide range of creative projects. Whether you're sketching intricate designs or building complex structures, it offers a seamless and immersive experience, perfect for anyone passionate about bringing ideas to life in three dimensions.
  • 3D Printer Training NZ
    View Cart
    Add to cart / Details

    3D Printing Training 1 on 1 up to 2 hrs

    $150.00 +gst
    Our 3D Printer training can be catered to a wide range of 3d printers. In our intro course, we cover the basics needed to start 3d printing with popular software & machines. If you would like to buy a specific 3d printer, we can setup training for that model. We offer free 3d training with many of our professional products. Please click here to see our 3d printing course page for full details on our 3d printer training.  
  • View Cart
    Add to cart / Details

    3D4makers Natural white C8 Filament – 750g

    $64.00 +gst

    3D4Makers C8 3D Printing Filament 1.75mm 750g

    Facilan™ C8 is a type of filament specifically designed for 3D printing. It is known for its excellent printability and high strength properties compared to traditional PLA (Polylactic Acid) filament. One notable advantage of Facilan™ C8 is its ability to print without visible layers. This means that the printed object will have a smooth and seamless appearance, devoid of any visible lines or layers that are typically seen with other filament types. This makes Facilan™ C8 ideal for printing objects that require a high level of aesthetic finish. In addition to its superior surface finish, Facilan™ C8 also possesses enhanced strength properties compared to PLA. The filament has good dimensional stability, which means that the printed objects are less prone to warping or shrinking during the printing process. This allows for greater structural integrity and accuracy in the printed parts.
  • View Cart
    Add to cart / Details

    3D4makers Natural white Ortho Filament – 750g

    $150.00 +gst

    3D4Makers Ortho 3D Printing Filament 1.75mm 750g

    Facilan™ Ortho Filament is a 3D printing material specifically designed for orthopedic applications. It is a durable and flexible filament that offers exceptional mechanical properties, making it ideal for creating customized splints, braces, and other orthopedic devices. One of its unique features is its excellent adhesion to textiles, allowing easy combination and bonding with textile inserts or other shoe components. Additionally, the low melting point of Facilan™ Ortho enables it to be easily reshaped with warm water after 3D printing. Made from a unique blend of biocompatible polymers, this filament ensures patient comfort and excellent skin contact. Facilan™ Ortho Filament provides healthcare professionals with the ability to tailor orthopedic devices to individual patient needs, facilitating faster healing and recovery. With its high printability and compatibility with most desktop 3D printers, this innovative material is revolutionizing the orthopedic industry. Facilan™ Ortho is a versatile and high-quality polyester, known for its clean white appearance. It exhibits exceptional mechanical properties and has a density of about 1.2kg/cm3. With a melting point around 60°C, it is a safe and easy-to-print thermoplastic. The flexibility and toughness of Facilan™ Ortho, attributed to its glass transition temperature of -60°C, make it highly durable. Moreover, it is a biodegradable plastic, meeting compostability standards according to EN13432.
  • filament, pla, dental, 3d printing, 1.75mm
    View Cart
    Add to cart / Details

    3D4makers Natural white PCL 100 Filament – 750g

    $200.00 +gst

    3D4Makers PCL 100 3D Printing Filament 1.75mm 750g

    Facilan™ PCL 100 is a highly functional filament made from polycaprolactone, perfect for advanced medical applications. It can be reshaped in water at 55 °C after 3D printing due to its low melting point. This material is widely used in the development of artificial tracheas, smart materials, tissue engineering scaffolds, bioabsorbable implants, and more. Renowned universities and research centers worldwide trust Facilan™ PCL 100 for cutting-edge bioprinting and personalized medical research. With its flexibility and toughness, this filament has a glass transition temperature of -60 °C and a print temperature of around 120 °C. Its semi-crystalline aliphatic biodegradable polyester composition gives it a distinctive white appearance. Complying with European regulations, the filament produced by 3D4Makers is safe for use with food contact. Additionally, it offers excellent adhesion between layers, enhancing impact resistance, strength, durability, and print quality.
  • Placeholder
    View Cart
    Add to cart / Details

    Buy 3D Print Service NZ

    $10.00 +gst
    Dear 3D print service customers, After you receive the confirmed 3D Print cost from us, please use this to place an order equal to the cost we agreed on. For eg, if the cost is $50, please select quantity of 5, so the total will be $50. We realise this is not an ideal system & are working to make it better. Thank you for your co-operation until then.
  • Jewellery Castable 3D Printing Resin New Zealand
    View Cart
    Add to cart / Details

    Castable Wax like 3D Printing Resin for Jewellery

    $190.00 +gst

    Phrozen Violet Castable Jewelry 3D Printing Resin

    We're happy to introduce the new Wax like Jewelry casting resin by Phrozen. Phrozen is revolutionising SLA 3D Printing resins by offering cutting edge formulations that provide better results than ever before at an amazing price point. Specially designed for jewellery casting, Phrozen’s Wax-like Castable Resins burn cleanly to provide reliable casting for all types of models, especially jewelry and any high precision dental parts. This is a violet resin, & is superior to most of the cheaper green dental casting resins you will find. These Violet resins can be used in dentristry as well, they are will offer finer details to most green products. Very similar casting properties to the Wax resin models used by Jewellers, & works with common burnout cycles. Please see the Burnout schedule image supplied by Phrozen that you can send to your casting company, or follow for casting yourself. We recommend cleaning these wax print parts with our special resin cleaning liquid inside an ultrasonic cleaner, after which you should cure them in a heated curer like our FlashForge FC1 cure box. This will provide low-shrinkage, high-precision models that will cast ash free with far less surface aberration. It will also have low water absorption during the printing process, giving you more consistent results than other castable resins on the market. Designed to be sent to your foundry for casting into any metal including gold, silver, platinum etc We recommend DLP technology to work with wax based resins, though common LCD printers will work fine as well. These resins are compatible with most mSLA LCD DLP style 3D Printers including our FlashFroge Hunter DLP, Phrozen Mega 8k, Sonic XL, & Transform 3D Printers. Can also be used with other 3d printer brands that use the 360-420nm UV spectrum resins like Anycubic Photon, Elegoo Mars, Epax, Wanhao, Creality LDR etc. 500ml can of violet resin 3D Printer Store has the largest range of 3D printing filaments & resins in stock right here in Auckland with economical shipping New Zealand wide.
  • Laser Mark PLA 3D Printing Filament NZ
    View Cart
    Add to cart / Details

    ColorFabb Laser Engraver Marking PLA filament 750g 1.75mm

    $90.00 +gst
    3D Print your part with this PLA & then Etch / Engrave with your Laser Engraver This unique material is optimized to be used with laser engravers within a 980-1064 nm wavelength. The material has been tested successfully with a Nd:YAG- and  fiberlasers. Laser marking has various advantageous over conventional marking technologies: Bright White Colour - Markings are permanent, waterproof, wear and heat resistant, lightfast and resistant to chemicals. - Flexibility in marking design. - No pre or post-treatment required. Laser marking PLA will not work with CO2 lasers. Please welcome ColorFabb's unique Laser marking Filament all the way from Netherlands & ready to ship right from Auckland.
  • Carbon Fiber Steel Sheet F430
    View Cart
    Add to cart / Details

    Creatbot 450x300mm Carbon Fiber Steel Bed Sheet

    $175.00 +gst
    Carbon Fibre reinforced Steel board Actual board size is 490mm x 305mm Designed to fit our Creatbot F430 PEEK 3d printer but can be used in any machine of similar size. The advantage is that this surface offers very high abrassion resistance. So when you 3d print with high temp materials, the surface can last longer. The other advantage of these boards is that they can be used as removable build plates. We recommend sticking a PEI sheet on this if you want to use them in that way, as PEI is a more versatile surface & not just one for 3d printing PEEK. Please see our 400x300mm PEI sheets here.
  • Generic Image Placeholder
    View Cart
    Add to cart / Details

    Creatbot aluminum Door handles

    $10.00 +gst
    Genuine Creatbot door handles. These are the slim thin silver coloured aluminum door handles on newer Creatbot 3d printers with hinged doors. They are the smaller size (approx 80mm long), which are used for DX, DE, F160. They are also used on the rear chamber doors of the F430. These are attached to the Acrylic doors on the D series, & corresponding door frames on F series machines.
  • Z Touch Probe NZ
    View Cart
    Add to cart / Details

    Creatbot BL Touch Probe Z axi

    $79.00 +gst
    This is the Touch Sensor used on many 3d printers like our Creatbot F430 & new D600 for the Z axi homing & auto level. If the probe tip bends or breaks, you can easily replace the probe. After many months of High Temperature printing, it is common for the probe's internal magnetism to get demagnetised due to the heat in the chamber. This can cause it to stop clicking on & off. Please replace the probe as needed.
  • Generic Image Placeholder
    View Cart
    Add to cart / Details

    Creatbot D Extruder Head Feed Tube with Plugs

    $40.00 +gst
    The Teflon feed tube to connect the extruder to the head on Creatbot D series 3d printers like the Creatbot DX, DE etc. Includes the brass studs that the tube plugs into & locks into place. Screws on the head end & the extruder end. No assembly needed. Available for 3mm filament as well as 1.75mm filament based Creatbot D series machines. Please specify filament diameter, otherwise the default 3mm compatible tubes will be sent as they are more common. If your lugs break off, please consider buying this 1 piece ready tube.
  • Cartridge Heater Long Wire for 3D Printer NZ
    View Cart
    Add to cart / Details

    Creatbot D Printers Head Cartridge Heater

    $20.00 +gst
    Standard Tube Cartridge Heater that slots inside the hot block. Has long wire leads. Suitable for all Creatbot D series 3d printers including DX , DX Plus, DE , DE Plus for all single, dual or triple head models.
  • Creatbot DX DE series 3D Printer nozzle
    View Cart
    Add to cart / Details

    Creatbot D series 3D Printer Nozzle

    $30.00 +gst
    Genuine Creatbot second generation nozzles. Will suit all Creatbot D series 3D Printers we sell: DM, DX, DE & Plus versions We stock a wide range of nozzle diameters: 0.4, 0.6, 0.8, 1.0 mm  
  • Generic Image Placeholder
    View Cart
    Add to cart / Details

    Creatbot D series 3D Printer Thermocouple Temperature Sensor

    $25.00 +gst
    This is a temperature sensing Thermocouple for Creatbot D series 3d printers. They will fit all Creatbot DX & DE machines bought since 2015.  
  • Creatbot D series 3d printer Throat Tube Heat Brake part new zealand
    View Cart
    Add to cart / Details

    Creatbot D series 3D Printer Throat Tube Heat Brake

    $20.00 +gst
    Genuine Creatbot Throat Tube which connects onto the heat sink on top & the nozzle goes at the bottom. If you have replaced nozzles & still find there are extrusion issues, please consider changing this part. This tube is considered part of the heat break mechanisk, & has a partial teflon coating on the top to aim smooth extrusion. So it is recommend you change this tube as needed for the best uniformity in extrusion as well as reduction of jams or blockages particular in longer 3d prints. Will suit all Creatbot D series 3D Printers we sell including DM, DX, DE, the Plus versions, & the older D600 3mm machines  
  • Creatbot D1000 commercial 3d printer 1 metre
    View Cart
    Add to cart / Details

    CreatBot D1000 Commercial 3D Printer (1000x1000x1000mm)

    $57,999.00 +gst
    Big Parts - High Accuracy - Production Capability -  In All Common Filaments The Creatbot D1000 is our new top of the line Commercial grade FDM 3D printer, now updated with Servo Controlled Stepper motors & closed loop feedback electronics, giving it the most precise head positioning capability of any large scale 3D Printer on the market. Large 1000mm x 1000mm x 1000mm active heated build volume makes it possible to print large parts one piece with ease. Suited to producing large yet highly accurate 3d models, the D1000 has every professional grade feature you would expect. Contact us today to see how our leading edge Creatbot D1000 could give your business & an edge in product development. Please see full specification details below. Free training is offered with our Creatbot D1000. We will spend several hours with you to discuss any product specific requirements & help you get the best possible outcomes from these machines. We also offer free implementation assistance at your site, so you can rely on a team right here in New Zealand. We are New Zealand's PREMIUM Creatbot 3D Printer Partner. We are the only one in NZ to offer FREE TRAINING with all these advanced Creatbot 3D Printers so that you fully supported after buying the 3D Printer & not left alone after the printer is delivered. There is no extra charge for this training service. This is the committment we have put into the New Zealand 3D Printing Market - We want you to succeed with 3D Printing, & in your success is our success. We aim to have the BEST PRICE & BEST SERVICE for Everything 3D Printing  in NZ. On top of our Free Training, we still Aim to be UNBEATEN on Price. If you find the same product & a comparable service level anywhere in New Zealand, please let us know as we will usually be able to beat the competition.
  • Creatbot D600 Pro 2 3d printer New Zealand Australia
    View Cart
    Add to cart / Details

    Creatbot D600 PRO 2 3D Printer with Servo Motor System

    $23,900.00 +gst
    Big Parts, High Accuracy, & Reliability - In ALL Filament Materials currently available. The Creatbot D600 Pro 2 is the latest version of the successful D600 commercial grade FDM 3D printer. It features Servo Controlled motors & closed loop feedback electronics, giving it the most precise head calibration of any similar sized large scale 3D Printer on the market. It has become common to see low cost large size 3d printers on the market. So why would you buy this one? Just doubling the size of every single part & giving you a large bed, doesn't lead to a successful print. With cheaper printers you will see them advertise a size like 500x500mm, but when you actually try to print a part that size, your builds will consistently fail. Multi-day prints will be composed of layer shifts in the XY direction, even a 0.1mm XY shift will land your part in the rubbish bin. This is why real commercial grade 3d printers are designed to be able to produce what the spec sheet actually has on it. And that is the reliability you need, so that you dont come back to a 3 day print only to throw it in the bin. Large 600mm x 600mm x 600mm actively convection heated build volume makes it possible to print large parts one piece with ease. And the servo control system doesn't cause stepper drivers to overheat, which is all too common in kit style large 3d printers. Suited to producing large yet highly accurate 3d models, the D600 has every professional grade feature you would expect. Contact us today to see how our leading edge Creatbot D600 2 could give you the edge in product development & manufacturing. Please see full specification details below. Free training is offered with our Creatbot D600. We will spend several hours with you to discuss any product specific requirements & help you get the best possible outcomes from these 3d printers. We will also help you implement the 3d printer into your workflow, so you can rely on a team right here in Auckland. We also offer Free Phone based support, not just email. All spare parts are stocked right here in Auckland & sent same day in most cases with overnight courier. So should you need a spare part, your 3d printer isn't sitting there costing you money. Its surprising how many 3d printer companies advertise machines but don't stock parts for when you need them the most. We are New Zealand's EXCLUSIVE Creatbot Partner. We are also authorised Creatbot suppiers for Australia. We are the only company in the regions to offer FREE TRAINING with these 3D Printers so that you fully supported after buying the 3D Printer & not left alone to figure things out. There is no extra charge for this support service. This is the commitment we have put into the New Zealand & Australian 3D Printing Market - We want you to succeed with 3D Printing, & in your success is our success. We aim to have the BEST PRICE & BEST SERVICE for Everything 3D Printing  in NZ / AU. On top of our Free Training, we still Aim to be UNBEATEN on Price. So if you find the same product & a comparable service level anywhere world wide, please get in touch with us & we will usually be able to beat the competition.
  • Creatbot D600 Pro commercial 3d printer
    View Cart
    Add to cart / Details

    Creatbot D600 PRO Large Volume Commercial 3D Printer

    $21,000.00 +gst
    Big Parts, High Accuracy, & Reliability - In ALL Filament Materials currently available. The Creatbot D600 Pro is based on the successful D600 commercial grade FDM 3D printer. It features Servo Controlled motors & closed loop feedback electronics, giving it the most precise head calibration of any similar sized large scale 3D Printer on the market. It has become common to see low cost large size 3d printers on the market. So why would you buy this one? Just doubling the size of every single part & giving you a large bed, doesn't lead to a successful print. With cheaper printers you will see them advertise a size like 500x500mm, but when you actually try to print a part that size, your builds will consistently fail. Multi-day prints will be composed of layer shifts in the XY direction, even a 0.1mm XY shift will land your part in the rubbish bin. This is why real commercial grade 3d printers are designed to be able to produce what the spec sheet actually has on it. And that is the reliability you need, so that you dont come back to a 3 day print only to throw it in the bin. Large 600mm x 600mm x 600mm actively convection heated build volume makes it possible to print large parts one piece with ease. And the servo control system doesn't cause stepper drivers to overheat, which is all too common in kit style large 3d printers. Suited to producing large yet highly accurate 3d models, the D600 has every professional grade feature you would expect. Contact us today to see how our leading edge Creatbot D600 could give you the edge in product development & manufacturing. Please see full specification details below. Free training is offered with our Creatbot D600. We will spend several hours with you to discuss any product specific requirements & help you get the best possible outcomes from these 3d printers. We will also help you implement the 3d printer into your workflow, so you can rely on a team right here in Auckland. We also offer Free Phone based support, not just email. All spare parts are stocked right here in Auckland & sent same day in most cases with overnight courier. So should you need a spare part, your 3d printer isn't sitting there costing you money. Its surprising how many 3d printer companies advertise machines but don't stock parts for when you need them the most. We are New Zealand's EXCLUSIVE Creatbot Partner. We are also authorised Creatbot suppliers for Australia. We are the only company in the region to offer FREE TRAINING with these 3D Printers so that you fully supported after buying the 3D Printer & not left alone to figure things out. There is no extra charge for this support service. This is the commitment we have put into the New Zealand & Australian 3D Printing Market - We want you to succeed with 3D Printing, & in your success is our success. We aim to have the BEST PRICE & BEST SERVICE for Everything 3D Printing  in NZ / AU.
  • CreatBot DE Plus Tripple Head 3D Printer
    View Cart
    Add to cart / Details

    CreatBot DE Plus 2 Extruder 3D Printer – FREE Training – NZ Support

    $6,000.00 +gst
    CreatBot DE plus has 2 high temp 400 deg C Extruders, also available in 3 extruders. The DE plus uses Core XY gantry system, which means the heads are kept tightly controlled for greater accuracy & precision. High Speed Geared motors (not plain stepper motors) for exceptional Feed & Retraction reliability You can print with 2 or 3 different materials or colours at the same time.
  • CreatBot DE Plus Tripple Head 3D Printer
    View Cart
    Add to cart / Details

    CreatBot DE Plus 3 Extruder 3D Printer – FREE Training – NZ Support

    $6,400.00 +gst
    CreatBot DE plus has 3 high temp 400 deg C Extruders. The DE plus uses Core XY gantry system, which means the heads are kept tightly controlled for greater accuracy & precision. High Speed Geared motors (not plain stepper motors) for exceptional Feed & Retraction reliability You can print with 3 different materials or colours at the same time.
  • DX 3D Printer Door Hinge New Zealand
    View Cart
    Add to cart / Details

    Creatbot Door Hinge

    $5.00 +gst
    Hinges used for many Creatbot 3D Printers. Fits newer version of Creatbot DX, DE & also some versions of F160. Used with the clear plastic panels used on doors. 1 piece. Please buy as many as you need. Standard 40mm hinge that can work for many other applications.
  • CreatBot DX Dual Head 3D Printer
    View Cart
    Add to cart / Details

    CreatBot DX 2 Dual Extruder 3D Printer

    $2,999.00 +gst
    With 2 high temp Extruders, Free Training, & Free Calibration, Creatbot DX 3D Printers are targeted to product development studios, manufacturing houses, and serious 3D Printing Professionals. These robust 3d printers are capable of delivering commercial quality results in industrial applications. You can choose 1.75mm heads or 3mm heads, or even 1 of each! Print 30cm x 30cm x 25cm parts 2 Heads (up to 3 available, please see DX03 model) Enhanced Stability with Everything Metal 40 - 800 micron layer height XY Precision of 0.05mm A highly reliable 3d printer that is at home in everything from a home office through to a factory floor - now at an unbeatable price.
  • CreatBot DX Dual Head 3D Printer
    View Cart
    Add to cart / Details

    CreatBot DX 3 Triple Head 3D Printer in NZ

    $3,399.00 +gst
    With 3 high temp Extruders, Free Training, & Free Calibration, Creatbot DX 3D Printers are targeted to product development studios, manufacturing houses, and serious 3D Printing Professionals. These robust 3d printers are capable of delivering commercial quality results in industrial applications. You can choose 1.75mm heads or 3mm heads, or even mix and match! Print 30cm x 30cm x 25cm parts 3 Heads Enhanced Stability with Everything Metal 40 - 800 micron layer height XY Precision of 0.05mm A highly reliable 3d printer that is at home in everything from a home office through to a factory floor - now at an unbeatable price.
  • CreatBot DX Plus 3D Printer
    View Cart
    Add to cart / Details

    CreatBot DX PLUS Dual Extruder 3D Printer – FREE Training & Support

    $3,599.00 +gst

    Creatbot DX PLUS 3D Printer - 2 Heads - 1.75mm or 3mm available!

    Print Big, Print HIGH & Print Fast - the DX Plus lets you print upto 520mm Tall !! With 2 high temp 350 deg C Extruders, Free Training, & Free Calibration, Creatbot DX 3D Printers are targeted to product development studios, manufacturing houses, and serious 3D Printing Professionals. These robust 3d printers are capable of delivering commercial quality results in industrial applications. All our Creatbot DX 3D Printers in New Zealand feature the advanced 350 Degree C high temp extruder. Watch out for older models that have the 250 deg Extruder version which does not support materials that need to go hotter to print reliably thus reducing the material compatibility. Please see below for full details. 3D Printing Services are Authorised Resellers for Creatbot in New Zealand. Month end Terms Available - please contact us to arrange!
  • Creatbot F430 filament feeder cog
    View Cart
    Add to cart / Details

    Creatbot extruder filament feeder Drive Gear cog

    $25.00 +gst
    This is the feeder gear that pushes filament inside the extruder on Creatbot F430, PEEk300, D600 Pro v1, & F160 series 3d printers. These cogs are made of hardened nickel stainless steel composite for optimum durability without being brittle. Most cheaper black feeders are made of carbide steel that can crack teeth & cause a jam in the hot end. This drive gear is mounted on the stepper motor inside the head. It is the cog that grips the filament & pushes it down the heat brake towards the hot end. Needs to be changed after a while when its teeth start to wear. Will wear more if using lots of Carbon or Glass Filled filaments.
  • Generic Image Placeholder
    View Cart
    Add to cart / Details

    Creatbot F Printers Head Cartridge Heater

    $20.00 +gst
    Suitable for all Creatbot F series 3d printers including F430, F160, & their PEEK edition 3d printers. Standard Tube Cartridge Heater that slots inside the hot block. Has a small connector to plug on the board.
  • Creatbot Hgh Temp Full metal hot end heat break nz
    View Cart
    Add to cart / Details

    Creatbot F series 1.75mm Full Metal Hotend Heat Brake Tube

    $20.00 +gst
    Genuine Creatbot Throat Tube which connects the hot block into the extruder mechanism. This is the Full Matal hot end which doesn't have a teflon liner inside, allowing you to easily print Carbon Fiber as well as high temp materials up to 450C. If you are new to 3d printing, you might find it useful to start with the other Teflon lined heat brake version as it can be easier to print common materials like PLA & ABS with that one. The heat sink & the nozzle is attached at the bottom of this piece. If you have replaced nozzles & still find there are extrusion issues, please consider changing this part. This tube is considered part of the heat break mechanisk, & has a partial teflon coating on the top to aim smooth extrusion. So it is recommend you change this tube as needed for the best uniformity in extrusion as well as reduction of jams or blockages particular in longer 3d prints. Will suit all Creatbot D series 3D Printers we sell including F160, F160 PEEK, F430, F430 PEEK, D600 PRO (not the older D600)
  • Creatbot teflon hot end heat break tube
    View Cart
    Add to cart / Details

    Creatbot F series 1.75mm Teflon lined Heat Brake Tube

    $20.00 +gst
    Genuine Creatbot Throat Tube which connects the hot block into the extruder mechanism. This is the teflon tube lined version which makes it easy to print PLA, PETg etc thanks to the teflon liner. But it will only operate up to 260C, please do not print hotter than that else you will damage the teflon liner. The heat sink & the nozzle is attached at the bottom of this piece. If you have replaced nozzles & still find there are extrusion issues, please consider changing this part. This tube is considered part of the heat break mechanisk, & has a partial teflon coating on the top to aim smooth extrusion. So it is recommend you change this tube as needed for the best uniformity in extrusion as well as reduction of jams or blockages particular in longer 3d prints. Will suit all Creatbot D series 3D Printers we sell including F160, F160 PEEK, F430, F430 PEEK, D600 PRO (not the older D600)
  • Generic Image Placeholder
    View Cart
    Add to cart / Details

    Creatbot F series 3D Printer Thermocouple Temperature Sensor

    $25.00 +gst
    This is a temperature sensing Thermocouple for Creatbot F series 3d printers. They will fit all Creatbot F430 & F160 3d printers.
  • Martensitic Steel Nozzle 3D Printers
    View Cart
    Select options This product has multiple variants. The options may be chosen on the product page / Details

    Creatbot F series Martensitic Steel – Best 3D Printer Nozzle

    $35.00 +gst
    Best Quality Creatbot Hardened Martensitic Steel nozzle for 1.75mm 3d printers to print high temperature & composite reinforced materials. Perfect for 3d printing Carbon Fiber, Glass Fiber, Kevlar, etc on Creatbot F430, F160, PEEK300 & D600 Pro 3d printers. Martensitic Steel nozzles are the best nozzles presently avaialble. They are the most durable nozzles compared to brass or stainless steel. Hardened martensitic steel allows much cleaner retractions than brass nozzles, which interestingly also improves the overall print quality. These nozzles can be used with Carbon Fiber filaments, however please be advised 0.4mm is on the edge, its a bit small for carbon to flow through well. Milled Carbon Fiber Nylon when printing small parts should be ok, but for larger longer prints, recommend using 0.6mm nozzles. These are well suited particularly for advanced materials that print at ultra high temps like PEEK, PEI Ultem, PPSU etc. Our nozzles are individually machined for optimum precision & longer life (not just die casted like cheap nozzles). Will suit all Creatbot F series 3D Printers we sell: Creatbot F160, F160 PEEK, F430 & F430 PEEK edition 3d printers We stock a wide range of nozzle diameters 0.3, 0.4, 0.6, 0.8 mm Our nozzles can also be used with other Mk8 compatible 3d printer heads.
  • 3d printer mk8 nozzle
    View Cart
    Select options This product has multiple variants. The options may be chosen on the product page / Details

    Creatbot F series Mk8 machined brass nozzle

    $20.00 +gst
    Genuine Creatbot brass nozzle for 1.75mm 3d printers. Will suit all Mk8 head 3d printers including all the Creatbot F series 3D Printers we sell: Creatbot F160, F160 PEEK, F430, F430 PEEK edition, PEEK-300, & D600 Pro 3d printers Our nozzles are individually Machined (not die casted & pressed like cheaper nozzles). The internal orifice & crucible shape of the nozzle is carefully manufactured, meaning you get less jams & clean flow without ripples. They will out last most cheaper nozzles on the market, & provide more consistent & reliable feeding as the diameter is accurate. These nozzles will work fine with all Mk8 thread extruder hot ends. So no matter your 3d printer, try out a higher quality nozzle that causes less problems & needs less changing. We stock a wide range of nozzle diameters 0.2, 0.3, 0.4, 0.6, 0.8 & 1mm. Please choose your size from the dropdown. We also sell Stainless Steel & hardened Martensitic steel nozzles which are superior to brass nozzles as they last longer. We recommend martensitic nozzles for Carbon Fiber 3d printing. And in general, Stainelss steel nozzles are better than brass even for general purpose 3d printing including using with Wood PLA.
  • Creatbot F430 F160 3d printer part cooling fan
    View Cart
    Add to cart / Details

    Creatbot F series part cooling fan

    $25.00 +gst
    This is a 24V DC radial fan used as the part cooling fan on Creatbot F430 & F160 3d printers. It is mounted to the side of the extruder 1 (between 1 & 2 if its a dual extruder machine) & plugs into the top extruder board above the head.
  • Creatbot USB reader board with adapter
    View Cart
    Add to cart / Details

    Creatbot F USB reader board with adapter

    $80.00 +gst
    This is the USB reader board used on a Creatbot F430 & F160 3d printer. This is the Latest version board with an adapter to allow certain older printer models to also be able to use it.
  • CreatBot F160 3D Printer
    View Cart
    Add to cart / Details

    Creatbot F160 3D Printer

    $2,500.00 +gst

    CreatBot F-160 3D Printer

    Industrial Build Quality & High Precision meets compact Desktop size & at an Affordable Price. A robust 3D Printer in a small footprint that can 3D print most materials with very high accuracy. Don't just take our word for it. Our F160 has been awarded  BEST OVERALL 3D Printer in New Zealand by the NZ Top Reviews List!! Please Note: This is the standard edition (not PEEK capable) F160 3D Printer. We also sell an advanced version of the same machine, but with even better capability that allows making small one off parts in Advanced materials like Aerospace Grade PEI or Medical Grade PEEK. Please see the F160 PEEK Edition here for more details. Creatbot F160 Build volume: 160mm x 160mm x 200mm
  • Creatbot F160 buildtak bed mat
    View Cart
    Add to cart / Details

    Creatbot F160 BuildTak Bed Mat

    $25.00 +gst
    Buildtak style Bed Mat designed for the Creatbot F160 & F160 PEEK 3d printer. This is a simple, easy to apply stick on mat that sticks on the bed of the 3d printer. It can even stick on an existing buildtak. Just peel the bottom & use like a sticker. Great adhesion for common materials like PLA, ABS, PETg, TPU. For a high wearing setup you can buy our matching Carbon Fibre Metal Plate to setup a removable bed system.
  • Carbon Fiber Steel Sheet F430
    View Cart
    Add to cart / Details

    Creatbot F160 Carbon Fibre Metal Sheet

    $59.00 +gst
    This is a Carbon Fibre reinforced spring steel sheet designed for the Creatbot F160 & F160 PEEK 3d printer Bed. It allows you to setup an easy removable build plate system by 3d printing on this plate, or attaching your chosen build surface onto this plate. Check out our matching Creatbot F160 Build Tak Bed Mat for a sleek & easy solution. This is a high wear resistant 3d printing surface that can provide good adhesion for PEEK & PEI or other advanced polymers, with appropriate surface glues. Ideal for those who 3d print with such materials extensively. You can print directly on Carbon Fibre plates with any material including PLA, but you must apply a little bit of Glue stick on this plate first. You can also buy our 200x200mm PEI sheet which are perfect to stick on this metal plate.  
  • Creatbot F160 series 3D Printer Australia & New Zealand
    View Cart
    Add to cart / Details

    Creatbot F160 PEEK Edition 3D Printer

    $2,900.00 +gst

    CreatBot F-160 PEEK Edition 3D Printer

    Industrial Quality, Affordable Price If you are looking for a robust 3D Printer in a Small Footprint that can 3D print ANY material including PEEK / PEI, look no further. Build volume: 160mm x 160mm x 200mm Please Note: This is the NEW PEEK edition Creatbot F160 3D Printer. The standard F160 can not print peek as it did doesn't have active chamber heating. The new F160 PEEK edition includes:
    • Very silent - quieter than most microwave ovens.
    • Fast Heating Extruder heats to 400 deg C
    • Fast heating Build plate heats to 120C
    • Active Chamber heater up to 70C
    • Automatic Resume on Power Failure
    • Auto Pause when Filament ends
    • Auto Shut off after 3d Print completed
    The F160 PEEK is the newer advanced version of our Award Winning F160 3D Printer that got Crowned BEST 3D PRINTER in New Zealand by TopReviewsNZ!
  • F430 professional 3d printing package with filaments & accessories
    View Cart
    Add to cart / Details

    Creatbot F430 3D Printer bundle save $200

    $6,400.00 +gst
    This package includes our #1 selling F430 advanced 3d printer with a selection of common filaments, advanced materials & recommended accessories. If you are looking to further your 3d printing using ultra performance materials, this bundle has everything you need to get started. You'll still get the Free Training & Delivery too. Buying this bundle will save you $200! Choose $600 worth of any items, but pay only $400 for them. Here are some popular items we suggest you to consider from: PLA filament (super easy versatile filament, a must have) Petg filament (easy yet capable, handles 65C & is a dense non-brittle material) Carbon Fiber reinforced PETg filament (easy to print, good stiffness, handles 85C with low moisture uptake) ABS reinforced Carbon Fiber Filament (best light weight filament that offers impact resistance, 120C temp, & light weight parts) ESD safe ABS (excellent for electronic components that may be near magnetic fields) Nylon PA filament (great for bushes & places with lubrication or chemicals) Polycarbonate Filament (excellent heat resistance, impact resistance, & flexibility) PEKK ultra performance filament (as good as PEEK yet easier to print on F430) Martensitic & Stainless nozzles, heat brake tubes Hot end parts like temp sensors & heaters Want a package customised to your specific needs? No problem, we can make a package deal that suits your needs. Please contact us & we'll make a discounted package just for you.
  • CreatBot F series 3d printer Hot End 420C Hot End High Temp NZ Aus
    View Cart
    Add to cart / Details

    Creatbot F430 F160 3D Printer 420C High Temp Hot End

    $79.00 +gst
    Genuine Creatbot high temp 420 degree rated hot end for F series 1.75mm 3d printers. Will suit all Creatbot F 3D Printers we sell including Creatbot F160, F160 PEEK, F430 & F430 PEEK edition 3d printers. This hot end will work for all materials upto 420C. This hot end doesnt have a teflon liner so it can be used with abrasive materials like carbon fibre. It will also work for PLA & other common materials. However, for beginners, we sometimes recommend printing those sorts of entry level materials with the standard temp hot end which has a teflon liner, which aids the smoother flow of PLA. So its a little more forgiving for times when your settings may not be quite perfect. However this teflon can be worn off by abrasive materials like Carbon Fiber, so for such materials we recommend printing with the high temp hot end which doesnt have that liner. If you also need a new temperature sensor thermister or thermocouple, or a new cartridge heater, please buy them separately.
  • CreatBot F 3d printer Hot End Standard 260C NZ Aus
    View Cart
    Add to cart / Details

    Creatbot F430 F160 3D Printer Standard 260C Temp Hot End

    $79.00 +gst
    Genuine Creatbot standard 260 degree rated hot end for F series 1.75mm 3d printers. Will suit all Creatbot F 3D Printers we sell including Creatbot F160, F160 PEEK, F430 & F430 PEEK edition 3d printers. This hot end is only for materials upto 260C. To print hotter, please use buy the High Temp Extruder hot end. The advantage of the standard hot end is that it has a teflon liner inside which aids smooth flow of materials like PLA. However this teflon can be worn off by abrasive materials like Carbon Fiber, so for such materials we recommend printing with the high temp hot end which doesnt have that liner. If you also need a new temperature sensor thermister or thermocouple, or a new cartridge heater, please buy them separately.  
  • Creatbot f430 3d printer store NZ
    View Cart
    Add to cart / Details

    Creatbot F430 PEEK Edition Professional 3D Printer

    $5,999.00 +gst

    Creatbot F430 - NZ's Most Advanced Professional Desktop 3D Printer

    With the new & improved Creatbot F430, you can 3D Print any material currently available in Filament Form. An Advanced 3D Printer that has every feature a versatile desktop 3D Printer can be expected to have for superb performance.Get the F430 & you will never look back.

    Why buy from us?

    We have these machines ready to collect or ship from our Auckland office. Free Training with the Creatbot F430 3d printer. Free Phone Support, not just email support. Free Fully Calibrated Material Specific Profiles for over 40 different requirements. We also give you $200 worth of extras including high temp capable hot ends in the package. We aim to have the BEST PRICE & BEST SERVICE for Everything 3D Printing in NZ. On top of our Free Training & Support, we still Aim to be UNBEATEN on Price. So if you find the same product & a comparable service level anywhere in New Zealand, please get in touch with us & we will usually be able to beat the competition. Why buy a High Temperature capable 3d printer? Machines like the Creatbot F430 are not only for high performance materials. They are much better at printing everything else. So the features that make the F430 a stunning desktop 3d printer are actually going to help anyone make better 3d prints time & time again even with the simplest of materials like PLA. This machine can 3d print with any material currently available in filament form, including the entire range of Carbon Fibre reinforced Nylon 6/12, Carbon PetG, Carbon Fibre PEI, Carbon Fibre PEKK, PEEK, PEKK, PEI, PPSU, PSF, ESD PC etc They will also print all your common PLA, ABS, ASA, PETG, TPU, etc extremely accurately. Please see Details & Technical Specifications below
  • CreatBot F430 X Axi Stepper Motor
    View Cart
    Add to cart / Details

    Creatbot F430 X axi Stepper Motor

    $80.00 +gst
    This motor is used in the Creatbot F430 3d printer. It is the X axi motor that connects on the linear rail to move the head left to right. This is the motor only, not the fan/heatsink. Please remember to put the heatsink & fan from your old motor onto the new motor.
  • Creatbot PEEK 300 3D Printer Ultra Advanced specialist performance New Zealand
    View Cart
    Add to cart / Details

    Creatbot PEEK 300 Industrial Material 3D Printer

    $21,000.00 +gst
    The CreatBot PEEK-300 is an ultra performance 3D printer specially optimised to work with ultra high performance advanced materials such as PEEK, PEKK, PEI (Ultem tm), etc polymers in a dedicated no-compromise environment. It is designed for high reliability and industrail performance at a price that is substantially cheaper than industrial additive manufacturing systems. 3D Print any advanced polymer filaments without any warping or shrinkage issues to deal with regardless of size. And thanks to the Patented DAS system, you won't need to anneal your prototpyes, saving you several hours & resources in post-print processing. Some example industry specific use cases :
    • Engine manifolds can be 3d printed using PEI 1010, which handles 200 deg C operating temp & mounted directly on the engine.
    • Injection moulding tooling can be directly printed & used for an average of 200 cycles, to create small batch production runs.
    • FDA approved parts can be 3d printed using PEI 9085 to aid substantial weight reduction on aircraft, with a weight to strength ratio that is greater than aluminum, with all the necessary flame retardant properties.
    • Hip, Knee & Jaw replacements for interbody transplants can be 3d printed using PEEK instead of titanium to aid MRI friendly post operative assessment & any future surgical planning.
    • Medical tools can be 3d printed using PPSF / PPSU & can survive commercial autoclave sterlisation exceeding 230 deg C & be exposed to bodily fluids as it is rated for use in biodiverse aqueus conditions.
    Ultra performance Polymers & Composites are the future in additive manufacturing of production parts on demand. Special Features found only on the Creatbot PEEK 300:
    • Water cooled triple heat isolation heads
    • Patented 400C Direct Annealing Air system.
    • 480 C Dual Lifting Extruder Heads
    • 120 C Active Heated Chamber
    • 200 C Heated Bed
    Build volume 300 x 300mm x 400mm height From the company that brought you the first affordable desktop grade PEEK capable 3D Printer, now comes a beast that is designed to deliver cutting edge factory parts on demand in Automotive, Aerospace, Medical, & R&D specifically using PEEK & its related family of plastic filaments.
  • Creatbot 3D printer power detection chip NZ
    View Cart
    Add to cart / Details

    Creatbot Power Failure Detection Board

    $49.00 +gst
    Power Interruption Circuit board for Creatbot desktop series D & F series 3d printers including DM , DX / DX Plus & DE / DE Plus 3D, F160 / F160 PEEK & F430 PEEK 3D Printer Printers. For D600 PRO series, PEEK 300 & F1000 series, please contact us for the appropriate part. This circuit board detects if there is a power failure while your Creatbot 3d printer is printing. Then when power resumes & the printer is started, the option to resume to resume the existing print is offered. This circuit is not critical, & the printer can still continue to be used with the board's white wire unplugged. Locations where there are excessive power outages seem to cause this board to blow out more frequently than other places. This is mainly because of spikes & voltage fluctuations in such locations. If you experience the need to frequently replace these, we recommend connecting your printer through a spike protector.
  • CreatBot UltraPA-CF 3D Printing Filament
    View Cart
    Add to cart / Details

    CreatBot UltraPA-CF Carbon Filled Nylon Filament – 1Kg

    $169.00 +gst
    Ultra PA-CF is a top-tier 3D printing material, featuring a high-temperature nylon base reinforced with 15% chopped carbon fiber. This advanced material offers exceptional characteristics including low moisture absorption, superior strength, outstanding wear resistance, excellent chemical resistance, and remarkable heat tolerance. During the printing process, Ultra PA-CF maintains excellent dimensional stability and eliminates edge warping issues, making it an ideal choice for producing high-quality finished parts in various industrial sectors.
  • Creatbot 6032 high current stepper driver
    View Cart
    Select options This product has multiple variants. The options may be chosen on the product page / Details

    Creatbot XYZ Stepper Driver

    $19.00 +gst
    These are the drivers used to drive the stepper motors on Creatbot 3d printers. They are used for the X Y Z axi motors as well as for the Extruder motors. Different drivers have been used for the X Y axi as well as for the Z & E1 / E2. Please choose the correct model number. If the model you have is not listed, please contact us & we will set it up for you.
  • Plastic Cutter Pliers NZ
    View Cart
    Add to cart / Details

    Cutting & Finishing Pliers

    $10.00 +gst

    Best Tool for 3D Print Cleanups

    These are jewellery grade snipping cutters. Great product for a top price - now in NZ, dont pay upto 200% more.. They are great to remove tiny bits of plastic or some support material without hurting yourself. This humble tool might look like any ordinary cutter, but its much more! The blades sharpened edges are at a horizontal angle & designed to cut close to the part surface. The spring loaded handles allow for careful & controlled cutting. The thin tip allows cleanup in harder to reach places. It is also excellent to cleanup the nozzle without hurting yourself. Try this excellent tool out - you will be impressed! Please note the colour is random, it can be either Red, Blue, Yellow, Orange.
  • Deli Glue Stick PVA 36g 7103
    View Cart
    Add to cart / Details

    Deli Glue Stick for 3D Printing – Improve Adhesion Reduce Warping

    $5.00 +gst
    Deli is an affordable versatile glue stick that works really well on all bed surfaces for all 3d printers. PLA, ABS, ASA, Nylon, HIPS etc will benefit from glue particularly on glass beds. You will need glue when 3d printing with Nylon, Carbon Fibre, PolyPropylene, & other Engineering materials that don't like to stick to other surfaces. Applying glue greatly reduces warping from all materials. You can start with this cheapest glue stick, & then move to get more specialised glue sticks from our collection of bed prep adhesives. Just apply a thin layer of this glue on a warm build surface, & print directly on it. Please take care that if printing directly on glass beds then some materials can crack the bed when taking it off after using glue. We recommend you buy a PEI sheet first rather than directly on glass or ceramic. This is a PVA based glue that easily wipes off with a damp cloth. Reapply only as needed. Less is more with Glue when used for 3d printing. 36g glue stick
  • Functional Engineering 3D Printing Resins New Zealand Australia
    View Cart
    Add to cart / Details

    Engineering Resin bundle

    $899.00 +gst

    The Ultimate Engineering Resin collection

    The Best Functional resins we have come across are in this collection. If you want to 3d print more than just pretty looking parts, this package will give handle every possible Engineering application you can think of. Materials included are: Onyx Impact Resin PC-GF Glass Filled Poly Carb simulating Resin Nylon like Green Resin TR300 high temp resin Wax Casting Resin Rubber Flexible Resin Flame Retardant Resin Resin cleaning liquid (Alcohol free, safe, non-combustible)
  • E10 metal angled build plate
    View Cart
    Add to cart / Details

    Epax E10 All Metal Angled Build Platform

    $149.00 +gst
    This is an upgraded, full metal build platform for EPAX E10 3D printers. It is compatible with all version of the E10 printer including the new E10 5K. The unique top bracket has been specially designed to fit E10 printers for optimum performance. It is a fully angled bed to allow the resin to flow down smoothly. Using this build platform will minimize resin accumulation on the top of the plate, allowing it to more readily drip back into the vat during printing. This makes clean-up and print removal faster, easier, and less messy overall so that you can spend more time printing. If you print a lot, or print very fast, or print larger parts, this all-metal build plate is the perfect choice.
  • Epax E10 Vat Resin Tray
    View Cart
    Add to cart / Details

    Epax E10 Vat Resin Tray with NFEP installed

    $99.00 +gst
    Genuine E10 resin tray molded using non corrosive plastic. This vat fits all EPAX E10 series 3D printers. Works with the original 8.9" screen E10 as well the new 10.1" E10 5K 3d printers. Each vat comes with a sheet of nFEP film already installed, ready to use. Just remove the old tray out & slide the new one in. Thats it, easy installation.
    • Molded tank allows for cheap replacements and extras for switching out resin on the fly
    • Fibreglass reinforced plastic sports increased durability and resistance to corrosion and resin.
    • It is equipped with a rubber seal to ensure that the vat is water-tight to help avoid resin leaks.
    • E10 Vat Max Volume 1500mL without build platform and 700mL with build platform
  • Sale!
    eSun Black 3d printer 1.75mm Filament New Zealand
    View Cart
    Add to cart / Details

    Esun ABS+HS High Speed ABS 1.75mm 1Kg BLACK

    Original price was: $36.00.Current price is: $32.00. +gst
    ABS+HS High Speed Low Warp 3D Printer Filament The new Esun ABS plus HS is a new formulation of ABS that allows for high speed 3d printing on modern 3d printers. It also works well with larger nozzles & fatter layers to improve build speed with high flow 3d printers. This is the easiest to 3d print ABS filament available to date for any 3d printer. The additives in ABS+ reduce corner warpage & improve part strength even when printed fast. This helps 3d printing ABS reliably in machines that dont have heated chambers. This new type of ABS 3d filament is suited to 3d printing finer ABS parts with a matted finish. 3D Prints with the same temperatures, speed & ease as regular ABS - with reduced warping. All ABS will shrink, but with this new filament esun have made it easier to 3d print abs as it warps lesser than common ABS filaments. We highly recommend PEI sheets as the BEST 3D printing surface for ABS.
  • eSUN TPU 87 Natural
    View Cart
    Add to cart / Details

    eSUN eFlex TPU 87A Natural White – Flexible 3D Filament – 1Kg

    $45.99 +gst

    Esun eFlex 87A TPU Flexible 3D Printing Filament

    This is grade 87A TPU which is quite flexible, yet slightly easier to 3d print than the softer grade like NinjaFlex 85A or TPE Elastic 83A. Thermoplastic Elastomeric is a broad category of flexible plastic filaments. This grade works well with most popular direct drive extruder 3d printers including Creatbot, Makerbot, FlashForge Creator, Prusa, Wanhao, etc without requiring extensive modifications. It is not the best choice for Bowden style 3d printers, but it has a better chance of working with them over the softer 83 or 85 TPU.. For cheaper bowden machines like Creality Ender, we recommend you start with Grade 95A as it is is easier to print. This is a 1 KG roll of 1.75mm Natural coloured Flexible plastic filament, slightly opague. If you want very rubbery stretchy prints that could even be used for some gaskets, please see our 83A filament. If you want very durable rubbery 3d prints that exhibit some similarity to HDPE / LDPE then please consider PA Nylon Filament
  • Esun Carbon Fibre Nylon 3D Printer Filament in NZ
    View Cart
    Add to cart / Details

    eSUN ePACF Carbon Fibre Reinforced Nylon 3D Printer Filament – 1Kg

    $79.00 +gst

    eSun PA-CF Carbon Fiber Nylon Filament

    This is Nylon 6 with 20% milled Carbon Fibre in it. This is our best selling Carbon Fiber filament thats easy to 3d print & offers excellent performance at a very affordable price point. Good flame resistance, Flame-retardant Level: UL94-V2;
    Filament ePA-CF
    Impact strength 18.67 KJ/M2
    Tensile Strength 140Mpa
    Elongation at break 10.61%
    Bending strength 140Mpa
    Flexural modulus 4363Mpa
    Heat distortion temperature 155℃

    Recommend Print Settings: Please see our article here on how to 3D Print Carbon Fibre

    Please remember to dry out the rolls in an oven at 70C for at least 4 hrs before 3d printing (even with a brand new roll, drying often helps) Active Heated chamber recommended for the best performance. Consider our Creatbot F-430 3D Printer if you intend to 3D Print Functional Carbon Fibre parts in a production like manner. 3D Printer Store has NZ's Largest range of engineering grade 3D Printing filaments & Carbon Fiber filaments.
  • PLA Rainbow eTwinkling Filament
    View Cart
    Add to cart / Details

    eSUN eTwinkling Rainbow Filament – 1Kg

    $37.00 +gst

    eSUN eTwinkling 3D Printer Filament 1Kg

    eTwinkling is based on PLA material, which allows for easy printing. The effect of the added glitter gives is very appealing and is a must see in person.
  • eSUN PA12 Black 3D Printing Filament
    View Cart
    Add to cart / Details

    eSUN Nylon 12 Black 3D Printer Filament – ePA12

    $90.00 +gst

    eSUN ePA12 Nylon Filament 1.75mm 1Kg Black

    Nylon 12 has several advantages over the usual Nylon 6 filaments. It has very low moisture abosrption, & far better UV performance. Higher Strength, Better Flexural Strength, High Surface Abrasion Resistance, Excellent Chemical Resistance, & works well with Lubricants. Nylon is suited perfectly in lubricating applications for bearings, gears & pulleys with belts. Nylon is a challenging material to 3d print. Active Heated chamber recommended for the best performance. Please consider advanced 3d printers such as the Creatbot F-430 3D Printer if you intend to 3D Print Functional parts frequently.
  • eSUN PA12 White 3D Printing Filament
    View Cart
    Add to cart / Details

    eSUN Nylon 12 White 3D Printer Filament – ePA12

    $90.00 +gst

    eSUN ePA12 Nylon Filament 1.75mm 1Kg White

    Nylon 12 has several advantages over the usual Nylon 6 filaments. It has very low moisture abosrption, & far better UV performance. Higher Strength, Better Flexural Strength, High Surface Abrasion Resistance, Excellent Chemical Resistance, & works well with Lubricants. Nylon is suited perfectly in lubricating applications for bearings, gears & pulleys with belts. Nylon is a challenging material to 3d print. Active Heated chamber recommended for the best performance. Please consider advanced 3d printers such as the Creatbot F-430 3D Printer if you intend to 3D Print Functional parts frequently.
  • eSUN PA12-CF Natural 3D Printing Filament
    View Cart
    Add to cart / Details

    eSUN PA12CF Nylon 12 Carbon Fiber 3D Filament

    $133.99 +gst

    eSUN Nylon 12 Carbon Fiber Now in NZ!

    We're really proud to be the first to introduce this highly sought after Nylon 12 grade Carbon Reinforced 3d filament in New Zealand. Most other filaments are Nylon 6. Our PA12 opens up possibilities that PA6 might not be capable enough to handle. Nylon PA12 far less moisture absorption making PA12 CF more suited to use in close aqueous or wet conditions even in contact with water. PA6 can get soft if it left in water for very long. Nylon 12 also handles much hotter temperatures, is much stiffer than Nylon 6, & even stronger - better than Nylon 6/6 as well. Nylon 12 also has excellent anti static properties. It is also UL94 V2 Flame Retardant for a continuous running temp of 120C making it perfect for electronics housings. Please be aware that Carbon Fiber however is slightly conductive, so if you need insulative properties, then the Glass Fiber Reinforced Nylon Filament will be a better choice. This is a 1Kg reel of 1.75mm filament. Carbon Fiber is always matte Black in colour (a very dark grey)
  • Sale!
    PLA matte 3d printing filament New Zealand
    View Cart
    Select options This product has multiple variants. The options may be chosen on the product page / Details

    eSUN PLA Matte Light Weight filament 1Kg – Many Colours

    $26.99 – $37.99 +gst
    Introducing ePLA-Matte by Esun, a matted PLA that is designed for users who want a non-glossy PLA filament. Most PLA has a sheen or a slightly shiny glossy look. The matte surface greatly reduces layer lines. Esun PLA Matte has a very pastel look, & is perfect for applications like architecture. Esun Matte PLA is an environmentally friendly bio material and easy to print just like all PLA filament. To improve sustainability,  the reel is made by injection molding reeused filament production waste and other industrial waste. And the outer box is made of recyclable paper. This enables 3D printing to be more aligned with New Zealand's environmental protection goals & climate emergency. Many colours available: Black, Dark Grey, White, Mint Green, Strawberry Red, Lilac, Almond Yellow, Peach Pink, Light Blue, Light Khaki, Morandi Green, Morandi Purple & Rainbow. Please choose colours from the drop down below.
  • pla-cf-black-filament
    View Cart
    Select options This product has multiple variants. The options may be chosen on the product page / Details

    eSUN PLA-CF – Carbon Fibre Filament – Many Colours – 1Kg

    $45.00 +gst
    Why our PLA-CF filament? Did you know that most Carbon Fiber reinforced PLA filaments have only 5% of Carbon in them? Our filament has 20% Carbon Fibre in it - making for a substantial improvement to PLA 3d filaments. We hunted long & far to find a PLA Plus CF that actually performs like it should, & finally have got one made to our specification using PLA plus rather than standard PLA & adding fibre to it. Improved toughness & higher flexural strength are just the beginning. Add Improved surface abrasion resistance, meaning prints wont be scratched easily over other materials. Expect improved peak temperature handling performance, meaning a short burst of temperature won't instantly melt your part. And the Good looks are a bonus. The surface finish of our PLA is smooth & the material is more reliable to 3d print than cheaper options. We still recommend using 0.6mm nozzles for big prints, but 0.4mm is not a problem for standard 3d printing.
  • eSUN PLA GF Glass Filled Filament
    View Cart
    Add to cart / Details

    eSUN PLA-GF Glass Filled PLA – 1Kg

    $45.00 +gst
    eSUN PLA-GF (Glass Filled) Natural We are happy to bring you the strength of Glass Filled Filament but with the ease of PLA printing. eSUN PLA-GF blend provides increased impact resistance, wear resistance and higher rigidity.